24 inch Coax Extension Cable Adds 24 inches of length between heated apparel and a 12-volt power source with coax connections.
Part Number: 51-2836 CAN$9.79
6 in. BMW-Style Socket to DC Coax Plug Installs into dash to provide battery power for a portable Heat-Troller. Or can be used as the output of a mounted Heat-Troller for connecting existing BMW-style plugged apparel.
Part Number: 51-2831 CAN$13.28
6 in. SAE Connection to DC Coax Plug Adapter Coax plug adapter cable with 6 inches of 16 AWG wire and SAE connector. For plugging a coax Heat-Troller to clothing using an SAE connector. Can also be used to plug a battery tender into a portable Heat-Troller DC Coax battery harness.
Part Number: 51-2835 CAN$7.8
6 inch SAE Connection to DC Coax Jack Adapter Coax jack adapter cable with 6 inches of 16 AWG wire and SAE connector. For connecting heated clothing with a coax plug to a SAE Heat-Troller.If you have an SAW batter tender connector installed on your bike you can use this adapter to plug in your heated gear.
Part Number: 51-2834 CAN$7.8
BMW Plug 18 in Coax Adapter BMW-Style Plug with 18 of 18 AWG wire to a SAE connector. The Plug is filled with Hot Glue to keep the wires from coming out and to make it waterproof.
Part Number: 51-2830 CAN$10.15
BMW-Style Plug Convert your existing heated apparel for use with a 12-volt motorcycle or ATV using a BMW-style power outlet.
Part Number: 51-2832 CAN$7.8
BMW-Style Socket with Cover Adapts any 12-volt motorcycle or ATV to provide a BMW-style power outlet. Spring-loaded cover keeps dirt out.
Part Number: 51-2833 CAN$11.71
Carbon Heated Gloves - Mens Sizes Theres nothing worse than trying to operate your bike with cold numb fingers. Bulky unheated gloves make things even tougher by reducing feel reaction time and complicating operation of the controls. Firstgears Warm Safe heated gloves for men and women feature heating throughout the entire glove while maintaining the thinness of a summer glove. The gloves plug directly into the jacket liner or an optional separate wire harness allowing riders to adjust the temperature of the gloves independently of the jacket with a Dual Heat-troller.- DC-heated produces 15 watts of heat at 12.8 Volts each glove and should be used with a Firstgear Heat-Troller for optimum safety - Grade-A top-grain drum-dyed cowhide construction - Porelle breathable waterproof membrane - Thinsulate layer - Pre-curved fingers and finger-mounted rubber faceshield wiper - Elastic wrist and adjustable hook-and-loop gauntlet closure - Reinforced protection in palm - Reflective piping on topNote: Cables are sold separately.
Part Number: CARB-GLV CAN$133.16
DC Coax Battery Harness DC harness with coax connector and waterproof fuse holder 15 amp fuse.
Part Number: 51-2829 CAN$7.8
DC Coax Plug Y-Harness Required for connecting heated gloves to a Heat-Troller without a heated jacket liner.
Part Number: 51-2837 CAN$11.71
Dual Mounted Heat-Troller Designed for 1 person to variably control heat separately to multiple garments suchas a jacket liner and gloves. It can also be used to balance the heat between any set of heated garments such as jacket liner on 1 control and gloves pants and socks on the other. Each rider must have their own Heat-Troller. Designed to be mounted to the vehicle. Requires drilling of holes for switch and L.E.D.
Part Number: 51-2821 CAN$93.98
Dual Portable Heat-Troller Designed for 1 person to variably control heat separately to multiple garments such as a jacket liner and gloves. It can also be used to balance the heat between any set of heated garments such as jacket liner on 1 control and gloves pants and socks on the other. Each rider must have their own Heat-Troller. Portability allows use on more than one 12-volt DC motorcycle or ATV.
Part Number: 51-2820 CAN$78.31
Dual Remote Control Heat-Troller Kit ulliDual wireless remote kit that includes: remote receiver and battery harness.liHi tech wireless remote control featuring electronic solid state design in small box.liA whole new platform technology - beyond Xtreme to Version Xi-RemoteliWaterproof remote control can be mounted on the bike or on the person no wires to limit placement.liWaterproof receiver that can be left in the liner full time including when washed.liSealed switch with tactile onoff and 300 rotation providing infinite heat levels between off and full on.liColor coded knobs and L.E.D.s for tactile and visual feedback.liIf lost a new remote is easily mated to the existing receiver.liReceiver is thin flat waterproof and rubberized for safety.liPlug compatible with most DC heated products.liHandles 15 amps at 13 volts with internal reset for overloads shorts.liBattery harness made of automotive grade wire that is resistant to oil acid water and grime with automotive-style fuse.liThe perfect mate for our liners especially when mated with our socks pants andor gloves.liSize Receiver 2.5 x 1.75 x .5 inch Control 1.9 x 1.3 inchliLimited 1-year warranty on liners.liLimited lifetime warranty on wiring.ul
Part Number: 51-2971 CAN$109.65
Dual Semi-Mounted Heat-Troller Designed for 1 person to variably control heat separately to multiple garments such as a jacket liner and gloves. It can also be used to balance the heat between any set of heated garments such as jacket liner on 1 control and gloves pants and socks on the other. Each rider must have their own Heat-Troller. Designed to be mounted without drilling any holes. Hook-and-loop the switch anywhere on a 12-volt DC motorcycle or ATV.
Part Number: 51-2822 CAN$109.65
Heated 65 watt Liner Jacket - Mens Sizes Firstgears no one left behind policy ensures that riders of any model motorcycle can take advantage of the warming effects of heated apparel by choosing between either the 65- or 90-watt versions. Good for low-amperage bikes or passengers not requiring as much heat as the rider the 65-watt units minimizes the draw on the bikes charging system.Efficient warming is dependent upon close proximity to the body. Firstgear reduced the amount of sizes while ensuring a good fit by incorporating stretch panels into the liners design. The long-sleeve liner cocoons its wearer in warmth by incorporating heating elements across the upper and lower back down the sleeves around the neck and to combat the effects of windchill the liner concentrates heat in the front of the jacket.
Part Number: 65LINER-MNS CAN$156.66
Heated 65 watt Liner Jacket - Mens Tall Sizes Firstgears no one left behind policy ensures that riders of any model motorcycle can take advantage of the warming effects of heated apparel by choosing between either the 65- or 90-watt versions. Good for low-amperage bikes or passengers not requiring as much heat as the rider the 65-watt units minimizes the draw on the bikes charging system.Efficient warming is dependent upon close proximity to the body. Firstgear reduced the amount of sizes while ensuring a good fit by incorporating stretch panels into the liners design. The long-sleeve liner cocoons its wearer in warmth by incorporating heating elements across the upper and lower back down the sleeves around the neck and to combat the effects of windchill the liner concentrates heat in the front of the jacket.
Part Number: 65LINER-TALL CAN$156.66
Heated 65 watt Liner Jacket - Womens Sizes Firstgears no one left behind policy ensures that riders of any model motorcycle can take advantage of the warming effects of heated apparel by choosing between either the 65- or 90-watt versions. Good for low-amperage bikes or passengers not requiring as much heat as the rider the 65-watt units minimizes the draw on the bikes charging system.Efficient warming is dependent upon close proximity to the body. Firstgear reduced the amount of sizes while ensuring a good fit by incorporating stretch panels into the liners design. The long-sleeve liner cocoons its wearer in warmth by incorporating heating elements across the upper and lower back down the sleeves around the neck and to combat the effects of windchill the liner concentrates heat in the front of the jacket.
Part Number: 65LINER-WMNS CAN$156.66
Heated 90 watt Liner Jacket - Mens Sizes Firstgears no one left behind policy ensures that riders of any model motorcycle can take advantage of the warming effects of heated apparel by choosing between either the 65- or 90-watt versions. Good for low-amperage bikes or passengers not requiring as much heat as the rider the 65-watt units minimizes the draw on the bikes charging system.Efficient warming is dependent upon close proximity to the body. Firstgear reduced the amount of sizes while ensuring a good fit by incorporating stretch panels into the liners design. The long-sleeve liner cocoons its wearer in warmth by incorporating heating elements across the upper and lower back down the sleeves around the neck and to combat the effects of windchill the liner concentrates heat in the front of the jacket.
Part Number: 90LINER-MN CAN$156.66
Heated 90 watt Liner Jacket - Mens Tall Sizes Firstgears no one left behind policy ensures that riders of any model motorcycle can take advantage of the warming effects of heated apparel by choosing between either the 65- or 90-watt versions. Good for low-amperage bikes or passengers not requiring as much heat as the rider the 65-watt units minimizes the draw on the bikes charging system.Efficient warming is dependent upon close proximity to the body. Firstgear reduced the amount of sizes while ensuring a good fit by incorporating stretch panels into the liners design. The long-sleeve liner cocoons its wearer in warmth by incorporating heating elements across the upper and lower back down the sleeves around the neck and to combat the effects of windchill the liner concentrates heat in the front of the jacket.
Part Number: 90LINER-TALL CAN$156.66
Heated 90 watt Liner Jacket - Womens Sizes Firstgears no one left behind policy ensures that riders of any model motorcycle can take advantage of the warming effects of heated apparel by choosing between either the 65- or 90-watt versions. Good for low-amperage bikes or passengers not requiring as much heat as the rider the 65-watt units minimizes the draw on the bikes charging system.Efficient warming is dependent upon close proximity to the body. Firstgear reduced the amount of sizes while ensuring a good fit by incorporating stretch panels into the liners design. The long-sleeve liner cocoons its wearer in warmth by incorporating heating elements across the upper and lower back down the sleeves around the neck and to combat the effects of windchill the liner concentrates heat in the front of the jacket.
Part Number: 90LINER-WMNS CAN$156.66
Heated Gloves - Mens Sizes Theres nothing worse than trying to operate your bike with cold numb fingers. Bulky unheated gloves make things even tougher by reducing feel reaction time and complicating operation of the controls. Our gloves feature heating throughout the entire glove while maintaining the thinness of a summer glove. They plug directly into the jacket liner or an optional separate wire harness allowing riders to adjust the temperature of the gloves independently of the jacket with a Dual Heat-troller.DC-heated produces 15 watts of heat at 12.8 Volts each glove and should be used with a Firstgear Heat-Troller for optimum safety Grade-A top-grain drum-dyed cowhide construction Porelle breathable waterproof membrane Thinsulate layer Pre-curved fingers and finger-mounted rubber faceshield wiper Elastic wrist and adjustable hook-and-loop gauntlet closure Reinforced protection in palm Reflective piping on topNote: Cables are sold separately.
Part Number: HEATED-GLOVES CAN$101.82
Heated Pants Liner - Men Heat Controllers sold separately.Form fitting close fit for optimum heat transfer to body. Made of Spandex fabric allowing full range of movement for any activity and fits easily under your outer garments. Our Pant Liners are not Unisex. The Mens and Womens Pants Liners are sized differently. And why not since men and women are built differently.ulliPacks into its included zippered pouch.liHeated zones cover thigh and knee.liIntegrated sock plugs stow in their own zippered pockets when not in use.liCoaxial plugs engineered by us for the best connection possible.liPerformance fabric: Anti-bacterial treatment prevents odors and Moisture Management wicks moisture away from skin.liAbout 35 watts 2.7 amps at 12.8 volts.liThis garment is designed to keep you warm when plugged into a DC power source.li1-year limited warranty on linerslifetime warranty on wiring.ul
Part Number: H-PANT-LIN-M CAN$148.83
Heated Passenger Gloves - Womens Sizes Theres nothing worse than trying to operate your bike with cold numb fingers. Bulky unheated gloves make things even tougher by reducing feel reaction time and complicating operation of the controls. Our gloves feature heating throughout the entire glove while maintaining the thinness of a summer glove. They plug directly into the jacket liner or an optional separate wire harness allowing riders to adjust the temperature of the gloves independently of the jacket with a Dual Heat-troller.DC-heated produces 15 watts of heat at 12.8 Volts each glove and should be used with a Firstgear Heat-Troller for optimum safety - Heat in the palms as well as the fingers thumb and back of hand - Grade A top grain drum-dyed cowhide- Porelle breathable waterproof membrane- Thinsulate layer- Pre-curved fingers - Elastic wrist and adjustable Velcro guantlet closure
Part Number: PSSNGER-WMN CAN$93.98
Heated Rider Gloves - Womens Sizes Theres nothing worse than trying to operate your bike with cold numb fingers. Bulky unheated gloves make things even tougher by reducing feel reaction time and complicating operation of the controls. Our gloves feature heating throughout the entire glove while maintaining the thinness of a summer glove. They plug directly into the jacket liner or an optional separate wire harness allowing riders to adjust the temperature of the gloves independently of the jacket with a Dual Heat-troller.DC-heated produces 15 watts of heat at 12.8 Volts each glove and should be used with a Firstgear Heat-Troller for optimum safety Grade-A top-grain drum-dyed cowhide construction Porelle breathable waterproof membrane Thinsulate layer Pre-curved fingers and finger-mounted rubber faceshield wiper Elastic wrist and adjustable hook-and-loop gauntlet closure Reinforced protection in palm Reflective piping on top
Part Number: HEATED-GLV-WMN CAN$101.82
Heated Socks Heat Controllers sold separately.The Warm Safe Heated Socks are in stock Made for the motorcyclist heat in the toe area where bikers actually get cold from wind and spray. Made from micro fleece they are not bulky and use the latest in flat heat technology. You do not feel wires. So unlike the other products on the market our heated socks keep your feet warm where they get cold are not too bulky to fit in your boots and are comfortableulliNon-binding top.liNo annoying wires.liHeat where you need it on the top of the toes.liTechnical fabric that is comfortable thin soft and wicks moisture.liFitted heel not a tube sock Heel fits where it is supposed to.liSeamless toe gets rid of bumps.li5 sizes for a better fit.li9 watts of heat in each sock at 12.8 volts.li2-year limited warranty.ul
Part Number: H-SOCK CAN$46.97
Portable Heat-Troller Belt Pouch - Dual Protects the portable Heat-Troller from dust and dirt. Belt clip on back of pouch for attaching to a belt or tank bag.
Power PortBMW Style Plug to Coax Jack 18 in Adapter This special plug can be used in both the standard car power port and by removing the red tip insulator also in the BMW style power ports. 18 of 18 AWG wire to a coax jack.
Single Mounted Heat-Troller Designed to variably control heat output of multiple connected garments on 1 person such as a jacket liner and gloves. To control temperature of each piece separately use our Dual Heat-Troller. Each rider must have their own Heat-Troller. Designed to be mounted to the vehicle. Requires drilling of holes for switch and L.E.D.
Part Number: 51-2818 CAN$62.64
Single Mounted Heated Grip Heat-Troller Designed to variably control heated grips or thumb-warmer or heated seats. Designed to be mounted to a 12-volt DC vehicle. Requires drilling of holes for switch and L.E.D.
Part Number: 51-2823 CAN$46.97
Single Portable Heat-Troller Designed to variably control heat output of 1 or multiple connected garments on 1 personsuch as a jacket liner and gloves. To control temperature of pieces separately use our Dual Heat-Troller. Each rider must have their own Heat-Troller. Portability allows you to use it with more than one 12-volt DC motorcycle or ATV.
Part Number: 51-2817 CAN$54.81
Single Remote Control Heat-Troller Kit ulliSingle wireless remote kit that includes: remote receiver and battery harness.liHi tech wireless remote control featuring electronic solid state design in small box.liA whole new platform technology - beyond Xtreme to Version Xi-RemoteliWaterproof remote control can be mounted on the bike or on the person no wires to limit placement.liWaterproof receiver that can be left in the liner full time including when washed.liSealed switch with tactile onoff and 300 rotation providing infinite heat levels between off and full on.liColor coded knobs and L.E.D.s for tactile and visual feedback.liIf lost a new remote is easily mated to the existing receiver.liReceiver is thin flat waterproof and rubberized for safety.liPlug compatible with most DC heated products.liHandles 15 amps at 13 volts with internal reset for overloads shorts.liBattery harness made of automotive grade wire that is resistant to oil acid water and grime with automotive style fuse.liThe perfect mate for our liners especially when mated with our socks pants andor gloves.liSize Receiver 2.5 x 1.75 x .5 inch Control 1.9 x 1.3 x .75 inch.liLimited 1-year warranty on liners.liLimited lifetime warranty on wiring.ul
Part Number: 51-2970 CAN$78.31
Single Semi-Mounted Heat-Troller Designed to variably control heat output of multiple connected garments on 1 person such as a jacket liner and gloves. To control temperature of each piece separately use our Dual Heat-Troller. Each rider must have their own Heat-Troller. Designed to be mounted without drilling any holes. Hook-and-loop the switch anywhere on a 12-volt DC motorcycle or ATV.
Part Number: 51-2819 CAN$70.48
Single Semi-Mounted Heated Grip Heat-Troller Designed to variably control heated grips or thumb-warmer or heated seats. Designed to be mounted to a 12-volt DC vehicle without drilling holes. Hook-and-loop the switch anywhere on a 12-volt DC motorcycle or ATV.
