PIÈCES DÈTACHÈE POUR MOTO No 1 en France

   

Rivco Parts

>> Back to All Products

1 12in Frame Mount Highway Mounts and Pegs1 12in Frame Mount Highway Mounts and Pegs
This product mounts directly to the front frame down tube is CNC machined from billet aluminum to match frame size triple chrome plated and will not slip or damage the frame. These mounts have an 8 range of adjustment both forward and back to fit any length leg making it easy to tailor to your own riding posture. Anti-vibration pegs included. Part PEGS-W Wide Pegs and Part HWBRD Highway Boards will not work with this product.To calculate the diameter easily wrap a dollar bill around the frame tube make a pencil mark where the bill overlaps remove and measure the length between the marks. A 3 12 measurement will be the 1 18 size the 4 14 will be the 1 14 size and the 4 1116 will be the 1 12 size.

Part Number: HD004
MSRP: CAN$125.32  Price: CAN$123

1 14in Frame Mount Highway Mounts and Pegs1 14in Frame Mount Highway Mounts and Pegs
This product mounts directly to the front frame down tube is CNC machined from billet aluminum to match frame size triple chrome plated and will not slip or damage the frame. These mounts have an 8 range of adjustment both forward and back to fit any length leg making it easy to tailor to your own riding posture. Anti-vibration pegs included. Part PEGS-W Wide Pegs and Part HWBRD Highway Boards will not work with this product.To calculate the diameter easily wrap a dollar bill around the frame tube make a pencil mark where the bill overlaps remove and measure the length between the marks. A 3 12 measurement will be the 1 18 size the 4 14 will be the 1 14 size and the 4 1116 will be the 1 12 size.

Part Number: HD003
MSRP: CAN$125.32  Price: CAN$123

1 14inch Engine Guard Mounts without Pegs1 14inch Engine Guard Mounts without Pegs
CNC Machined Billet Aluminum compatible with or without lowers. These all-aluminum highway mounts are CNC machined from aircraft-quality billet aluminum. This structural design makes the mounts strong enough that you can stand on the mounts and they WILL NOT SLIPThe 6 long arms have a full 360 range of motion to accommodate any leg length. This means 56 possible adjustments The arms lock into the selected position with an internal locking pin. The mounts can be used with Rivco pegs and floorboards or any other peg having up to a 38 mounting bolt. The set is triple chrome plated comes with all stainless steel hardware and detailed mounting instructions. Pegs sold separately. These Crash Bar Mounts are perfect for Harley Davidsons.

Part Number: HD005
MSRP: CAN$109.65  Price: CAN$108.12

1 18in Frame Mount Highway Mounts and Pegs1 18in Frame Mount Highway Mounts and Pegs
This product mounts directly to the front frame down tube is CNC machined from billet aluminum to match frame size triple chrome plated and will not slip or damage the frame. These mounts have an 8 range of adjustment both forward and back to fit any length leg making it easy to tailor to your own riding posture. Anti-vibration pegs included. Will not fit on Softails with TC88 Engines due to the new Frame Size HD003 is required.Part PEGS-W Wide Pegs and Part HWBRD Highway Boards will not work with this product.To calculate the diameter easily wrap a dollar bill around the frame tube make a pencil mark where the bill overlaps remove and measure the length between the marks. A 3 12 measurement will be the 1 18 size the 4 14 will be the 1 14 size and the 4 1116 will be the 1 12 size.

Part Number: HD002
MSRP: CAN$125.32  Price: CAN$123

1-14 in Frame Mount Highway Mounts and Pegs Black - Harley Models1-14 in Frame Mount Highway Mounts and Pegs Black - Harley Models
These mounts will also work on any motorcycle with a 1 14 frame and fit all models without engine guards. The arms mount directly to the front frame down tubes. The mounts allow for an 8 rangeof motion 4 forward or 4 backwards from the center line of the frame tubes to fit any leg length making it easy to adjust to your riding style and provide maximum comfort. The arm and peg have a combined length of 13 clamp securely to the frame and they will not slip. Includes anti-vibration pegs with RIVCOs exclusive angle adjustment locking set screws. CNC machined from billet aluminum and black powder coated they also include all stainless steel hardware. Fits most American and metric bikes with these frame sizes. To calculate the diameter easily wrap a dollar bill around the frame tube make a pencil mark where the bill overlaps remove and measure the length between the marks. A 3 12 measurement will be the 1 18 size the 4 14 will be the 1 14 size and the 4 1116 will be the 1 12 size.NOTE: Part PEGS-W Wide Pegs and Part HWBRD Highway Boards will not work with this product.

Part Number: HD003BK
MSRP: CAN$125.32  Price: CAN$123

2 inch 55 Watt Driving Light Set for GL18002 inch 55 Watt Driving Light Set for GL1800
These driving lights mount directly to the existing screw no drilling on the bottom of all GL1800 mirrors. Chrome plated steel housing contain 55 watt halogen sealed beam bulbs. While compact they deliver an amazing amount of light and in this high wide location they provide greatly increased visibility of the road as well as to oncoming traffic. Includes mounting hardware plug in wire harness relay switch easy to follow instructions.

Part Number: GL18006
MSRP: CAN$101.82  Price: CAN$100.28

2-12 Inch 150 Watt MP3 Satellite Sound System Kit - Harley Davidson FLHR Sportster2-12 Inch 150 Watt MP3 Satellite Sound System Kit - Harley Davidson FLHR Sportster
ulli2 12 inch Motorcycle Speaker and amplifier system cranks out 150-watts of sound. liWith their precision machined frame assemblies Kapton 1 voice coils and polypropylene alloy cones these micro driver speakers are twice as loud and half the size of similar looking speakers. liWait until you hear the sound - This system blows away the competition liWorks with: iPod iPhone mp3 Satellite Radio not included or any device that uses a 3.5mm earphone jack. liIncludes both P and mirror speaker mounting clamps150 watt amplifier with mounting bracket and handlebar mounted bracket to attach your music device securely plug play wire harness and all necessary connectors.liAccurate and faithful musical reproductionliRemarkable extended bassliRugged construction is vibration and waterproofliSimply connect your music source to the 3.5mm jackliAllows the rider to mount under the handlebarsliKit come with 1 p-clamps and mirror Z-bracket mountsul

Part Number: CS076C
MSRP: CAN$313.36  Price: CAN$307.12

2-12 Inch 150 Watt MP3 Satellite Sound System Kit - Metric Harley Models2-12 Inch 150 Watt MP3 Satellite Sound System Kit - Metric Harley Models
ulli2 12 inch Motorcycle Speaker and amplifier system cranks out 150-watts of sound. liWith their precision machined frame assemblies Kapton 1 voice coils and polypropylene alloy cones these micro driver speakers are twice as loud and half the size of similar looking speakers. liWait until you hear the sound - This system blows away the competition liWorks with: iPod iPhone mp3 Satellite Radio not included or any device that uses a 3.5mm earphone jack. liIncludes both P and mirror speaker mounting clamps150 watt amplifier with mounting bracket and handlebar mounted bracket to attach your music device securely plug play wire harness and all necessary connectors.liAccurate and faithful musical reproductionliRemarkable extended bassliRugged construction is vibration and waterproofliSimply connect your music source to the 3.5mm jackliAllows the rider to mount under the handlebarsliKit come with 1 p-clamps and mirror Z-bracket mountsul

Part Number: CS005C
MSRP: CAN$313.36  Price: CAN$307.12

2in 55W Driving Light with 1.25in Clamps pr2in 55W Driving Light with 1.25in Clamps pr
Increase your motorcycles visibility with 55-Watt Halogen Driving Lights. This compact set of driving lights can be mounted to engine guards handlebars using the 1.25 clamps inside fairings or on a light bar. Chrome plated steel housings 55 watt halogen sealed beam bulb and swivel mounts with 6mm bolts. This set of lights while small deliver an amazing amount of light.

Part Number: DL20K125
MSRP: CAN$117.49  Price: CAN$115.17

2in 55W Driving Light with 1in Clamps pr2in 55W Driving Light with 1in Clamps pr
Increase your motorcycles visibility with 55-Watt Halogen Driving Lights. This compact set of driving lights can be mounted to engine guards handlebars using the 1 clamps inside fairings or on a light bar. Chrome plated steel housings 55 watt halogen sealed beam bulb and swivel mounts with 6mm bolts. This set of lights while small deliver an amazing amount of light.

Part Number: DL20K1
MSRP: CAN$117.49  Price: CAN$115.17

2in 55W Driving Lights pr2in 55W Driving Lights pr
Increase your motorcycles visibility with 55-Watt Halogen Driving Lights. This compact set of driving lights can be mounted to engine guards handlebars inside fairings or on a light bar using any of our No. CLMP clamps. Chrome plated steel housings 55 watt halogen sealed beam bulb and swivel mounts with 6mm bolts. This set of lights while small deliver an amazing amount of light.

Part Number: DL20
MSRP: CAN$58.72  Price: CAN$57.97

2in Peg Extensions pair2in Peg Extensions pair
Peg extensions for all Rivco pegs - adds 2 of width to each side. Mounts between the peg and the clevis folding mechanism. Folds up with peg. Triple chrome-plated.

Part Number: PEGSEXT
CAN$31.3

3 Inch 200 Watt MP3 Satellite Sound System Kit - Harley Davidson Road King Sportster3 Inch 200 Watt MP3 Satellite Sound System Kit - Harley Davidson Road King Sportster
ulli3 inch Motorcycle Speaker and amplifier system cranks out 200-watts of sound. liWith their precision machined frame assemblies Kapton 1 voice coils and polypropylene alloy cones these micro driver speakers are twice as loud and half the size of similar looking speakers. liWait until you hear the sound - This system blows away the competition liWorks with: iPod iPhone mp3 Satellite Radio not included or any device that uses a 3.5mm earphone jack. liIncludes both P and mirror speaker mounting clamps200 watt amplifier with mounting bracket and handlebar mounted bracket to attach your music device securely plug play wire harness and all necessary connectors.liAccurate and faithful musical reproductionliRemarkable extended bassliRugged construction is vibration and waterproofliSimply connect your music source to the 3.5mm jackliAllows the rider to mount under the handlebarsliKit come with 1 p-clamps and mirror Z-bracket mountsul

Part Number: CS075C
MSRP: CAN$391.71  Price: CAN$383.91

3 Inch 200 Watt MP3 Satellite Sound System Kit - Metric Harley Models3 Inch 200 Watt MP3 Satellite Sound System Kit - Metric Harley Models
ulli3 inch Motorcycle Speaker and amplifier system cranks out 200-watts of sound. liWith their precision machined frame assemblies Kapton 1 voice coils and polypropylene alloy cones these micro driver speakers are twice as loud and half the size of similar looking speakers. liWait until you hear the sound - This system blows away the competition liWorks with: iPod iPhone mp3 Satellite Radio not included or any device that uses a 3.5mm earphone jack. liIncludes both P and mirror speaker mounting clamps200 watt amplifier with mounting bracket and handlebar mounted bracket to attach your music device securely plug play wire harness and all necessary connectors.liAccurate and faithful musical reproductionliRemarkable extended bassliRugged construction is vibration and waterproofliSimply connect your music source to the 3.5mm jackliAllows the rider to mount under the handlebarsliKit come with 1 p-clamps and mirror Z-bracket mountsul

Part Number: CS015C
MSRP: CAN$391.71  Price: CAN$383.91

3 inch Peg Extensions Pair3 inch Peg Extensions Pair
Made to fit all RIVCO pegs and add 3 of width to each side. Mounts between the peg and the clevis folding mechanism. Folds up with the peg. Triple chrome plated.

Part Number: PEGSEXT-3
CAN$33.65

3 Piece Heavy Duty Screw Together Flag Pole3 Piece Heavy Duty Screw Together Flag Pole
3 Piece Heavy Duty Screw Together Flag Pole Goes together in seconds. Comes with heavy wire spring clips for quick flag changes and security in high winds. Machined from stainless steel tubing polished to a flawless finish. Complete with custom sewn storage bag and gold tone finial. Fits inside a Harley saddle bag trunk or Gold Wing trunk. Sections are 24 and assembles to 72. NOTE: While it will withstand a 100lb. load it is recommended for use at a maximum speed of 25 miles an hour. Due to the adverse handling that a flag can cause at higher speeds.

Part Number: PFPOLE-3
MSRP: CAN$101.82  Price: CAN$100.28

3 x 5ft American Flag3 x 5ft American Flag
36 x 60 3 x 5 American Flag. Compatible with RIVCO Telescoping Flag Pole PFPOLE. Lightweight yet sturdy nylon construction and bright colors combine to create a moving display of patriotism.

Part Number: PFFLAG
CAN$15.63

3 x 5ft POWMIA Flag3 x 5ft POWMIA Flag
36 x 60 3 x 5 flag displaying the POW-MIA symbol. Compatible with the RIVCO Telescoping Flag Pole.

Part Number: PFPOW
CAN$15.63

30 Amp Electric Relay30 Amp Electric Relay
This American-made completely sealed relay will protect light-duty OEM wiring and switches ex: horn button from damage when adding accessories that draw high amounts of current. Strongly recommended for use with all electric horn systems and driving lights. These relays are included with all RIVCO Air Horn systems to operate the compressor.

Part Number: RELAY
MSRP: CAN$7.8  Price: CAN$7.64

4.5in 35W Driving Lights pr4.5in 35W Driving Lights pr
Increase your motorcycles visibility with 35 Watt Sealed BeamBulb Lens Driving Lights. These driving lights have shallow 2 12 housings which provide increased clearance for use in front of windshields. They feature chrome plated steel housings and 35 watt sealed beambulb lenses. These lower wattage bulbs provide additional light and can be left on at all times to get attention of oncoming traffic without being offensive. The bases swivel and have 10mm mounting studs. For a retro look combine these with optional visors VAL006-V. Also available are powerful 35 watt halogen spot light narrow beam bulbs 45HB.

Part Number: DL45
MSRP: CAN$62.64  Price: CAN$61.89

4.5in 35W Halogen Bulbs4.5in 35W Halogen Bulbs
Increase your motorcycles visibility with 35 watt Halogen Replacement Bulbs for most driving lights. 4.5 sealed beam with screw terminal hook ups. Gives a bright white narrow spot light effect. Fits all 4.5 drivingpassing lights. sold in pairs

Part Number: 45HB
CAN$31.3

4.5in Driving Light Visors pair4.5in Driving Light Visors pair
Chrome driving light visors fits all 4.5 bulbs. Installs easily and gives your driving lights or spotlights that custom look.Sold in pairs.

Part Number: VAL006-V
CAN$15.63

4in 5560W Driving Lights with HighLow pr4in 5560W Driving Lights with HighLow pr
Increase your motorcycles visibility with 5560-Watt Halogen Driving Lights. This light set is made specifically for larger motorcycles. The stylish bullet shaped housings are chrome plated steel lenses are impact resistant Lexan and they have replaceable 5560 Watt Halogen bulbs that deliver an extremely bright white light when on that really lights up the road. Each light housing mounts on a swivel clevis with 38 studs.

Part Number: DL35
MSRP: CAN$117.49  Price: CAN$115.17

5-to-4 Wire Converter5-to-4 Wire Converter
Adapt your motorcycles 5 wire system to power a 4 wire trailer.

Part Number: EC07664
CAN$23.47

6 inch x 9 inch All Gave Some Some Gave All Flag6 inch x 9 inch All Gave Some Some Gave All Flag
Compatible with RIVCOs License Plate Double Flag Holder Kit FH100 and Trunk Mounted Single Flag Holder Kit FH200. Lightweight yet sturdy construction and bold colors combine to create a moving display of patriotism. For both cruiser and touring class motorcycles all flags are 6 x 9 and are two-ply with heavy-duty bindings and double-stitched corners as well as highway speed rated.

Part Number: PFST-17
MSRP: CAN$9.36  Price: CAN$9.17

6 inch x 9 inch American Flag6 inch x 9 inch American Flag
Compatible with RIVCOs License Plate Double Flag Holder Kit FH100 and Trunk Mounted Single Flag Holder Kit FH200. Lightweight yet sturdy construction and bright colors combine to create a moving display of patriotism. For both cruiser and touring class motorcycles all flags are 6 x 9 and are two-ply with heavy-duty bindings and double-stitched corners as well as highway speed rated.

Part Number: PFST-01
MSRP: CAN$9.36  Price: CAN$9.17

6 inch x 9 inch Fire Department Flag Logo with Red Flames6 inch x 9 inch Fire Department Flag Logo with Red Flames
Compatible with RIVCOs License Plate Double Flag Holder Kit FH100 and Trunk Mounted Single Flag Holder Kit FH200. Lightweight yet sturdy construction and bold colors combine to create a moving display of patriotism. For both cruiser and touring class motorcycles all flags are 6 x 9 and are two-ply with heavy-duty bindings and double-stitched corners as well as highway speed rated.

Part Number: PFST-30
MSRP: CAN$9.36  Price: CAN$9.17

6 inch x 9 inch Live to Ride Ride to Live Flag6 inch x 9 inch Live to Ride Ride to Live Flag
Compatible with RIVCOs License Plate Double Flag Holder Kit FH100 and Trunk Mounted Single Flag Holder Kit FH200. Lightweight yet sturdy construction and bold colors combine to create a moving display of patriotism. For both cruiser and touring class motorcycles all flags are 6 x 9 and are two-ply with heavy-duty bindings and double-stitched corners as well as highway speed rated.

Part Number: PFST-18
MSRP: CAN$9.36  Price: CAN$9.17

6 inch x 9 inch Police Flag Shield with Blue Flames6 inch x 9 inch Police Flag Shield with Blue Flames
Compatible with RIVCOs License Plate Double Flag Holder Kit FH100 and Trunk Mounted Single Flag Holder Kit FH200. Lightweight yet sturdy construction and bold colors combine to create a moving display of patriotism. For both cruiser and touring class motorcycles all flags are 6 x 9 and are two-ply with heavy-duty bindings and double-stitched corners as well as highway speed rated.

Part Number: PFST-28
MSRP: CAN$9.36  Price: CAN$9.17

6 inch x 9 inch POW-MIA Flag6 inch x 9 inch POW-MIA Flag
Compatible with RIVCOs License Plate Double Flag Holder Kit FH100 and Trunk Mounted Single Flag Holder Kit FH200. Lightweight yet sturdy construction and bold colors combine to create a moving display of patriotism. For both cruiser and touring class motorcycles all flags are 6 x 9 and are two-ply with heavy-duty bindings and double-stitched corners as well as highway speed rated.

Part Number: PFST-02
MSRP: CAN$9.36  Price: CAN$9.17

6 inch x 9 inch Support Our Troops Flag6 inch x 9 inch Support Our Troops Flag
Compatible with RIVCOs License Plate Double Flag Holder Kit FH100 and Trunk Mounted Single Flag Holder Kit FH200. Lightweight yet sturdy construction and bold colors combine to create a moving display of patriotism. For both cruiser and touring class motorcycles all flags are 6 x 9 and are two-ply with heavy-duty bindings and double-stitched corners as well as highway speed rated.

Part Number: PFST-05
MSRP: CAN$9.36  Price: CAN$9.17

6 inch x 9 inch Welcome Home Our Heroes Flag6 inch x 9 inch Welcome Home Our Heroes Flag
Compatible with RIVCOs License Plate Double Flag Holder Kit FH100 and Trunk Mounted Single Flag Holder Kit FH200. Lightweight yet sturdy construction and bold colors combine to create a moving display of patriotism. For both cruiser and touring class motorcycles all flags are 6 x 9 and are two-ply with heavy-duty bindings and double-stitched corners as well as highway speed rated.

Part Number: PFST-16
MSRP: CAN$9.36  Price: CAN$9.17

Adjustable Billet Arm Rests for GL1800Adjustable Billet Arm Rests for GL1800
This fully adjustable set of armrests is the finest available. CNC machined from solid billet aluminum hand-polished to a flawless finish and triple chrome-plated with luxuriously padded and upholstered cushions they feature a new and innovative vertically pivoting design that allows full trunk access without having to move the arms out of the way. The rotating arms have adjustments for height width to provide maximum passenger comfort. They attach to hidden sturdy steel mounting plates that fit directly behind the passenger backrest. Includes a cup holder mounting bracket.

Part Number: GL18094
MSRP: CAN$235.01  Price: CAN$230.34

Adjustable Center Stand - Harley TouringAdjustable Center Stand - Harley Touring
Designed for 2001-2008 Screamin Eagle FLT and FLH models which have a lower ride height as well as any other FLT or FLH that has been fitted with a Harley-Davidson lowering kit 12-14 inch long center-to-center shock absorbers rather than the standard equipment 13 inch center-to-center shocksThe feet on this stand screw in or out from the leg and lock in place with a setscrew. This allows you to set the height that the rear wheel is lifted from the ground when on the stand at the recommended 34 to 1 inches and requires minimal effort to place the motorcycle up onto the center stand. It is polished to a flawless finish triple chrome plated and has all the same great features as our other center stands. This product can also be used as a ride-off stand.

Part Number: HD001A
MSRP: CAN$250.68  Price: CAN$246.01

Adjustable Classic Steel Passenger Boards for FL Models with Rinehart ExhaustsAdjustable Classic Steel Passenger Boards for FL Models with Rinehart Exhausts
Adjusts to 12 positions through a rotating 9 range of motion in seconds by pulling the spring-loaded locking pins. Gives your passengers the best possible leg support and comfort. The mounts are CNC machined from billet aluminum and all parts are triple chrome plated. Installs easily without modification to the bike. Includes Classic Steel Passenger Floorboards with anti-vibration rubber pads to ensure greater passenger comfort. US PAT: 7114739

Part Number: HD125A-RE
MSRP: CAN$297.69  Price: CAN$292.24

Adjustable Classic Steel Passenger Boards for Harley DavidsonsAdjustable Classic Steel Passenger Boards for Harley Davidsons
Adjusts to 12 positions through a rotating 9 range of motion in seconds by pulling the spring-loaded locking pins. Gives your passengers the best possible leg support and comfort. The mounts are CNC machined from billet aluminum and all parts are triple chrome plated. Installs easily without modification to the bike. Includes Classic Steel Passenger Floorboards with anti-vibration rubber pads to ensure greater passenger comfort. US PAT: 7114739

Part Number: HD125A
MSRP: CAN$297.69  Price: CAN$292.24

Adjustable Passenger Boards for HDAdjustable Passenger Boards for HD
Adjusts in seconds by pulling the spring loaded locking pins. The ultimate in passenger comfort they greatly increase foot and leg support over the stock boards. The pads are made of anti-vibration neoprene to ensure passenger comfort. The boards and mounts are CNC machined from billet aluminum and triple chrome-plated. We have also moved the boards 2.5 forward to eliminate the commonly reported problem from passengers of their calves pressing against the saddlebag guard rail causing discomfort. Installs easily without modification to the bike.

Part Number: HD005A
MSRP: CAN$336.87  Price: CAN$330.63

Adjustable Passenger Boards with Rinehart Exhaust for HDAdjustable Passenger Boards with Rinehart Exhaust for HD
Adjusts in seconds by pulling the spring loaded locking pins. The ultimate in passenger comfort they greatly increase foot and leg support over the stock boards. The pads are made of anti-vibration neoprene to ensure passenger comfort. The boards and mounts are CNC machined from billet aluminum and triple chrome-plated. Weve moved the boards 2.5 forward to eliminate the commonly reported problem from passengers of their calf pressing against the saddlebag guard rail causing discomfort. Installs easily without modification to the bike. Made for use with Rinehart Exhaust.

Part Number: HD005A-RE
MSRP: CAN$336.87  Price: CAN$330.63

Air Horn Kit for HarleyAir Horn Kit for Harley
Air Horn kit. Several mounting abilities and locations to fit Harley Davidson and any other bikes with frame mounting ability or engine guards. These horns give a loud warning blast of 125 decibels all chrome finish.

Part Number: AHHD
MSRP: CAN$156.66  Price: CAN$153.56

Air Horn Kit for Harley - BlackAir Horn Kit for Harley - Black
Air Horns for Harley-Davidsons-Will fit on any Harley with a left side of the engine under the tank horn mount. Were the original manufacturer and weve been producing world-class quality cruiser bike air horns for over 17 years Dont get stuck with cheap imitations These air horns give a loud warning blast of 128 decibels Uses the stock horn button. Can be easily installed in 20-30 minutes. The trumpets are black satin powder coated finish as are the mounts and brackets so the look will last for years to come. They are completely waterproof. No hole drilling is required with bolt-on plug-in installation. Cone shaped covers are included which mount to the front of the trumpets. Two year unlimited warranty. All kits include two horns air compressor relay simple wiring and complete installation instructions. The horns replace the stock horn and the compressor is either mounted under the seat behind right side cover or on down tube of frame Different models vary The air compressor creates instant air pressure to the horns. Since the pressure is created so fast there is no need for a storage tank as on Semi Trucks and RVs. Although the pressure is very low 12-15 psi it delivers a large volume of air 3 CFM or cubic feet per minute. This low-pressure high volume air supply causes the diaphragm inside the horn to vibrate at a high rate of speed or frequency the exact speed at which it vibrates is varied by the length of the horn or trumpet. Together the horn set produces an extremely loud 128-decibel warning blast. This is approximately 4 times louder than most electric motorcycle horns which usually rate at 87 decibels.

Part Number: AHHDBK
MSRP: CAN$156.66  Price: CAN$153.56

Air Horns Front Mount - GL1500 88-97 GL1200 GL1100 GL1000 VF750 Magna Yamaha Venture 83-93Air Horns Front Mount - GL1500 88-97 GL1200 GL1100 GL1000 VF750 Magna Yamaha Venture 83-93
These air horns give a loud warning blast of 128 decibels Uses the stock horn button. Can be easily installed in 20-30 minutes.All air horn sets are bolt on and plug-in requiring about 30 minutes to install. They include the compressor dustbug covers all necessary hardware hoses wiring fuse relay and detailed instructions with pictures.The trumpets are triple plated chrome as well as the mounts and brackets so the shine and finish will last for years to come. They are completely waterproof. No drilling is required: bolt-on plug-in installation. Cone shaped covers are included which mount to the front of the trumpets. One year unlimited warranty.All kits include horn assembly air compressor relay simple wiring and complete installation instructions. These horns mount to the front right side engine guard with the compressor mounting to the frame behind the lowers.The air compressor creates instant air pressure to the horns. Since the pressure is created so fast there is no need for a storage tank as on Semi Trucks and RVs. Although the pressure is very low 12-15 psi it delivers a large volume of air 3 CFM or cubic feet per minute. This low-pressure high volume air supply causes the diaphragm inside the horn to vibrate at a high rate of speed or frequency the exact speed at which it vibrates is varied by the length of the horn or trumpet. Together the horn set produces an extremely loud 128-decibel warning blast. This is approximately 4 times louder than most electric motorcycle horns which usually rate at 87 decibels.A stock motorcycle horn draws only a small amount of power - less than 1 amp - which comes directly from the horn button on the handlebars producing the familiar weak motorcycle beep. The air horns electric air compressor draws considerably more power - approximately 8 amps. This requires the use of a relay heavier gauge wire and a fuse to prevent damage to the horn button contacts as well as provide enough amperage to run the compressor at full speed. Th

Part Number: AHFRT
MSRP: CAN$156.66  Price: CAN$153.56

Air Horns Front Mount - GL1500 98-00Air Horns Front Mount - GL1500 98-00
These air horns give a loud warning blast of 128 decibels Uses the stock horn button. Can be easily installed in 20-30 minutes.All air horn sets are bolt on and plug-in requiring about 30 minutes to install. They include the compressor dustbug covers all necessary hardware hoses wiring fuse relay and detailed instructions with pictures.The trumpets are triple plated chrome as well as the mounts and brackets so the shine and finish will last for years to come. They are completely waterproof. No drilling is required: bolt-on plug-in installation. Cone shaped covers are included which mount to the front of the trumpets. One year unlimited warranty.All kits include horn assembly air compressor relay simple wiring and complete installation instructions. These horns mount to the front right side engine guard with the compressor mounting to the frame behind the lowers.The air compressor creates instant air pressure to the horns. Since the pressure is created so fast there is no need for a storage tank as on Semi Trucks and RVs. Although the pressure is very low 12-15 psi it delivers a large volume of air 3 CFM or cubic feet per minute. This low-pressure high volume air supply causes the diaphragm inside the horn to vibrate at a high rate of speed or frequency the exact speed at which it vibrates is varied by the length of the horn or trumpet. Together the horn set produces an extremely loud 128-decibel warning blast. This is approximately 4 times louder than most electric motorcycle horns which usually rate at 87 decibels.A stock motorcycle horn draws only a small amount of power - less than 1 amp - which comes directly from the horn button on the handlebars producing the familiar weak motorcycle beep. The air horns electric air compressor draws considerably more power - approximately 8 amps. This requires the use of a relay heavier gauge wire and a fuse to prevent damage to the horn button contacts as well as provide enough amperage to run the compressor at full speed. Th

Part Number: AH98
MSRP: CAN$156.66  Price: CAN$153.56

Air Hose by the FootAir Hose by the Foot
Replacement Air Hose Sold by the foot. If 5 feet is needed order a quantity of 5.

Part Number: HOSE
MSRP: CAN$1.18  Price: CAN$1.15

Aluminum 1 78in Hitch Ball with BoltAluminum 1 78in Hitch Ball with Bolt
Weighs just 8 oz. including mounting bolt. Machined from aircraft aluminum and plated with a hard anodized coating that is harder than tool steel. This is the only ball to consider for motorcycle towing 1 78

Part Number: GL18007-B
CAN$19.55

Anti-Vibration Highway Pegs prAnti-Vibration Highway Pegs pr
Our high-quality peg and board sets fit with ANY highway mount. They may look a little like others... but take a closer look to see the big differences. All RIVCO Highway Mounts Pegs are made from steel and aluminum and are supplied with stainless steel hardware - they wont slip or shift.Pegs are triple chrome-plated and will work with all RIVCO mounts. They have 38 mounting bolts and can be used with most other brands of mounts. Includes our unique locking setscrew system that allows you to adjust the pegs to the desired angle.

Part Number: PEGS
CAN$35.22

Billet Aluminum Brake Pedal Cover for Harley-DavidsonBillet Aluminum Brake Pedal Cover for Harley-Davidson
This slip-on brake pedal cover is the finishing touch to match your new billet Driver Floorboards. Also CNC machined from billet aluminum and triple chrome plated. Driver Floorboards sold separately.

Part Number: HD025
CAN$28.17

Billet Aluminum Driver Floorboards - Triumph Rocket III StandardBillet Aluminum Driver Floorboards - Triumph Rocket III Standard
They bolt on in place of the stock driver pegs and measure 5 inch x 8 inch which provides full support for your feet as well as room to move around a little on longer rides. Machined from billet aluminum triple chrome plated with sot anti-vibration neoprene rubber pads. The floorboards are hinged on their mounts and will fold up in the event of a tip over. Retains the stock shift and brake pedals while maintaining adequate room above and below. Fits Standard Models Only.

Part Number: TR3024
MSRP: CAN$227.18  Price: CAN$223.29

Billet Aluminum FrontRear Caliper Cover Single - 00-Up HDBillet Aluminum FrontRear Caliper Cover Single - 00-Up HD
These universal frontrear billet aluminum caliper covers hide most of the dull black and add an eye-catching accent to the brake caliper. Long lasting triple chrome plated. They attach easily and securely with 3M VHB double faced tape. Sold individually be sure to order correct amount for front andor rear.

Part Number: HD030
MSRP: CAN$12.5  Price: CAN$12.25

Billet Driver Floorboards - Triumph ThunderbirdBillet Driver Floorboards - Triumph Thunderbird
ulliGives your Thunderbird an additional customized look liBolt on in place of the stock pegs measure 8 x 5 provide full support for your feet and are tipped back towards the rider at a 15 angle for maximum comfort. liThe Premium Billet design is triple chrome plated and is also inlaid with anti-vibration neoprene rubber to further insure passenger comfort. liThe floorboards will fold up in the event of a tip over and retain the stock shift and brake pedals while maintaining adequate foot room above and below.ul

Part Number: TB024
MSRP: CAN$227.18  Price: CAN$223.29

Billet Passenger Boards for Valkyrie RuneBillet Passenger Boards for Valkyrie Rune
Turn your Rune into a comfortable ride for two. Set up your Rune with a set of these triple chrome plated RIVCO Premium Billet passenger boards and a two-up touring saddle available from Corbin and youll have the hottest bike And be able to take your favorite passenger on your next ride. The specially designed mounts bolt securely to the mainsub frame mounting bolts. The mounts then protrude through openings easily made in the chrome side covers using layout templates provided with the set. The boards then attach to the mounts using only one bolt on each board. They fold up when not in use - when you want to return the bike to its solo look. NOTE: Optional chrome caps are available separately.

Part Number: NRX005
MSRP: CAN$336.87  Price: CAN$330.63

Black Powder Coated Anti-Vibration PegsBlack Powder Coated Anti-Vibration Pegs
Our high-quality peg and board sets fit with ANY highway mount. They may look a little like others... but take a closer look to see the big difference. All RIVCO Highway Mounts Pegs are supplied with stainless steel hardware utilizing our unique locking setscrew system - will not slip or shift.This set is finished in a very durable satin black powder coating. They have 38 mounting bolts and can be used with most other brands of mounts. The pegs locking setscrews allow you to adjust the pegs to the desired angle.

Part Number: PEGSBK
MSRP: CAN$43.05  Price: CAN$42.3

Blue Bike with Flame Long Sleeve Shirt BlackBlue Bike with Flame Long Sleeve Shirt Black
RIVCO T-shirts are 100 cotton with RIVCO logo on the front: full color back. Available in Youth - XXL

Part Number: TSHIRT2
CAN$17.98

Blue Bike with Flame Long Sleeve Shirt WhiteBlue Bike with Flame Long Sleeve Shirt White
RIVCO T-shirts are 100 cotton with RIVCO logo on the front: full color back. Available in Youth - XXL

Part Number: TSHIRT3
CAN$17.98

Brake Light Signal ModuleBrake Light Signal Module
Maximize your brake light effectiveness with this compact electronic module that converts your ordinary brake light into an attention-getting flasher when you are stopped or stopping. With this module installed as you apply your brakes it causes your brake light to automatically emit a visual alerting signal of 3 short light flashes followed by 1 long flash 3.5 sec. The signal automatically repeats itself as long as the brakes are applied. This pattern is not random but has been selected because of its ability to retain the following drivers attention.

Part Number: SBRKL02
CAN$35.22

Brake Pedal Cover - Triumph Rocket III 04 to 06Brake Pedal Cover - Triumph Rocket III 04 to 06
NC machined from billet aluminum and triple chrome-plated. Slips on the existing motorbike brake pedal after removing the rubber cover.

Part Number: TR3025
MSRP: CAN$38.35  Price: CAN$37.6

Brake Pedal Relocator - Yamaha XV19 StratolinerRoadlinerBrake Pedal Relocator - Yamaha XV19 StratolinerRoadliner
This kit designed to replace the original rear brake actuating rod lowers the brake pedal height by 2 giving you better braking control as well as ease of braking. By changing the relocation it eliminates the danger of your foot getting stuck under the brake pedal during emergency braking situations. Installs easily in minutes.

Part Number: XV19025
CAN$23.47

Centerstand - Black - Harley Davidson FLH FLT 89 - 08Centerstand - Black - Harley Davidson FLH FLT 89 - 08
ulliFor 89 through 2008 FLH and FLT Models with a stock ride height. liDoes NOT fit Screamin Eagles Street Glides or any other FLT or FLH that has been fitted with a Harley-Davidson lowering kit 12 li14 long center-to-center shock absorbers rather than the standard equipment 13. liOur centerstands are engineered to stand the motorcycle upright and lift the rear wheel approximately 1 off the ground. liTheir design and operating theory is like any OEM centerstand you may have usedapplying your bodyweight and the basic principle of leverage on the foot pedal to place the bike up onto the stand in one simple motion. liGetting off the centerstand is done by giving a push forward while seated on the motorcycle. By having your bike standing upright with the rear wheel off the ground youll be able to easily detail your wheels check air pressure check and change oil and filter remove wheels and perform many other maintenance functions. liBeing upright greatly reduces the required storage space in your garage. liAnother added benefit is taking 90 of the bikes weight off the tires during storage extending their longevity and performance. liSeeing your bike on a centerstand sets it apart from others in a crowd and tells people your motorcycle is a show stopper. liSome of our centerstands can be set and used as Ride-Off Stands also. liThey feature adjustable threaded feet allowing the motorcycle to be on the stand but low enough for both wheels to be on the ground. liAs the name implies the motorcycle can be put in gear and then ridden off the stand. Laser-cut then CNC bent and machined to exacting tolerances each centerstand is hand-welded by our American craftsmen and triple chrome plated or powder coated. liBolting to the frame in minutes without modification to your bike theyre virtually unseen in the retracted position and do not reduce ground clearance or interfere with cornering ability.ulNOTE: cannot be used as a ride-off stand.

Part Number: HD001BK
MSRP: CAN$227.18  Price: CAN$223.29

Centerstand - Royal Star Venture 98-Up and Royal Star Tour Deluxe 05-08Centerstand - Royal Star Venture 98-Up and Royal Star Tour Deluxe 05-08
Bolts directly to the frame weighs in at only 9 lbs. Will not interfere with ground clearance or cornering clearance. Installs in about 30 minutes. Triple plated chrome. Makes servicing and cleaning your bike easy

Part Number: RSV001
MSRP: CAN$274.19  Price: CAN$268.73

Centerstand - Triumph Rocket III Standard and ClassicCenterstand - Triumph Rocket III Standard and Classic
This is truly a must have for a motorcycle of this size and stature. It makes cleaning and maintenance easier as well as showcasing your Rocket. Bolts directly to the frame in minutes without any cutting or welding required and wont interfere with cornering or ground clearance. Lifts rear wheel 34 off the ground. Has large footpads to prevent sinking into the ground or soft asphalt. Includes a hide-away nylon web strap grab handle for smooth and easy operation. Machined and laser cut to exact tolerances hand welded and triple chrome plated. Fits with all stock and aftermarket exhaust systems.

Part Number: TR3001
MSRP: CAN$266.35  Price: CAN$261.68

Centerstand for All Triumph AmericaSpeedmasterCenterstand for All Triumph AmericaSpeedmaster
Machined and laser-cut to exact tolerances hand welded and finished in black powder coat this centerstand bolts directly to the frame and does not reduce cornering or ground clearance. It lifts the rear wheel 1 off the ground and has large foot pads to prevent sinking into the ground or soft asphalt. Includes a hide away nylon-web strap grab handle for smooth easy operation.

Part Number: TA001
MSRP: CAN$211.51  Price: CAN$207.62

CenterstandRide-Off Stand for Harley Tour Models Black 09 and newerCenterstandRide-Off Stand for Harley Tour Models Black 09 and newer
For all 2009 and newer FLT and FLH models Road King Classic Ultra Classic Street Glide Road Glide and Sreamin Eagle models as well as any other FLT or FLH that has been fitted with the Harley-Davidson lowering kit. Our centerstands are engineered to stand the motorcycle upright and lift the rear wheel approximately 1 off the ground. Their design and operating theory is like any OEM centerstand you may have usedapplying your bodyweight and the basic principle of leverage on the foot pedal to place the bike up onto the stand in one simple motion. Getting off the centerstand is done by giving a push forward while seated on the motorcycle. By having your bike standing upright with the rear wheel off the ground youll be able to easily detail your wheels check air pressure check and change oil and filter remove wheels and perform many other maintenance functions. Being upright greatly reduces the required storage space in your garage. Another added benefit is taking 90 of the bikes weight off the tires during storage extending their longevity and performance. Seeing your bike on a centerstand sets it apart from others in a crowd and tells people your motorcycle is a show stopper. Some of our centerstands can be set and used as Ride-Off Stands also. They feature adjustable threaded feet allowing the motorcycle to be on the stand but low enough for both wheels to be on the ground. As the name implies the motorcycle can be put in gear and then ridden off the stand. Laser-cut then CNC bent and machined to exacting tolerances each centerstand is hand-welded by our American craftsmen and triple chrome plated or powder coated. Bolting to the frame in minutes without modification to your bike theyre virtually unseen in the retracted position and do not reduce ground clearance or interfere with cornering ability.

Part Number: HD001A-09BK
MSRP: CAN$227.18  Price: CAN$223.29

CenterstandRide-Off Stand for Harley Tour Models Chrome 09 and newerCenterstandRide-Off Stand for Harley Tour Models Chrome 09 and newer
For all 2009 and newer FLT and FLH models Road King Classic Ultra Classic Street Glide Road Glide and Sreamin Eagle models as well as any other FLT or FLH that has been fitted with the Harley-Davidson lowering kit. Our centerstands are engineered to stand the motorcycle upright and lift the rear wheel approximately 1 off the ground. Their design and operating theory is like any OEM centerstand you may have usedapplying your bodyweight and the basic principle of leverage on the foot pedal to place the bike up onto the stand in one simple motion. Getting off the centerstand is done by giving a push forward while seated on the motorcycle. By having your bike standing upright with the rear wheel off the ground youll be able to easily detail your wheels check air pressure check and change oil and filter remove wheels and perform many other maintenance functions. Being upright greatly reduces the required storage space in your garage. Another added benefit is taking 90 of the bikes weight off the tires during storage extending their longevity and performance. Seeing your bike on a centerstand sets it apart from others in a crowd and tells people your motorcycle is a show stopper. Some of our centerstands can be set and used as Ride-Off Stands also. They feature adjustable threaded feet allowing the motorcycle to be on the stand but low enough for both wheels to be on the ground. As the name implies the motorcycle can be put in gear and then ridden off the stand. Laser-cut then CNC bent and machined to exacting tolerances each centerstand is hand-welded by our American craftsmen and triple chrome plated or powder coated. Bolting to the frame in minutes without modification to your bike theyre virtually unseen in the retracted position and do not reduce ground clearance or interfere with cornering ability.

Part Number: HD001A-09
MSRP: CAN$258.52  Price: CAN$253.85

Cheaters Sunglasses - BlackSmoke 1.5Cheaters Sunglasses - BlackSmoke 1.5
Combines protective safety glasses with reading glasses. This BlackSmoked version features: 5-position lens angle adjustment provides a customized fit Cushioned non-slip rubber temple pads for superior comfort Magnification diopter is molded into the polycarbonate lens Lightweight nylon frame High tech vented rubber nose piece Exceeds the new ANSI Z87.1 standards and blocks 99.9 UV rays FREE Protective Sleeve included

Part Number: CH1-215
CAN$15.63

Cheaters Sunglasses - Clear 1.5Cheaters Sunglasses - Clear 1.5
Combines protective riding safety glasses with reading glasses. This Clear version features: 5-position lens angle adjustment provides a customized fit Cushioned non-slip rubber temple pads for superior comfort Magnification diopter is molded into the polycarbonate lens Lightweight nylon frame High tech vented rubber nosepiece Exceeds the new ANSI Z87.1 standards and blocks 99.9 UV rays FREE Protective Sleeve included.

Part Number: CH1-115
CAN$15.63

Cheaters Sunglasses - Clear 2.0Cheaters Sunglasses - Clear 2.0
Combines protective riding safety glasses with reading glasses. This Clear version features: 5-position lens angle adjustment provides a customized fit Cushioned non-slip rubber temple pads for superior comfort Magnification diopter is molded into the polycarbonate lens Lightweight nylon frame High tech vented rubber nosepiece Exceeds the new ANSI Z87.1 standards and blocks 99.9 UV rays FREE Protective Sleeve included.

Part Number: CH1-120
CAN$15.63

Cheaters Sunglasses - Clear 2.5Cheaters Sunglasses - Clear 2.5
Combines protective riding safety glasses with reading glasses. This Clear version features: 5-position lens angle adjustment provides a customized fit Cushioned non-slip rubber temple pads for superior comfort Magnification diopter is molded into the polycarbonate lens Lightweight nylon frame High tech vented rubber nosepiece Exceeds the new ANSI Z87.1 standards and blocks 99.9 UV rays FREE Protective Sleeve included.

Part Number: CH1-125
CAN$15.63

Cheaters Sunglasses BlackIndoor and Outdoor 2.0Cheaters Sunglasses BlackIndoor and Outdoor 2.0
Combines protective riding safety glasses with reading glasses. This BlackSmoked version features: 5-position lens angle adjustment provides a customized fit. Cushioned non-slip rubber temple pads for superior comfort. Magnification diopter is molded into the polycarbonate lens. Lightweight nylon frame. High tech vented rubber nose piece. Exceeds the new ANSI Z87.1 standards and blocks 99.9 UV rays. FREE Protective Sleeve included.

Part Number: CH1-920
CAN$15.63

Cheaters Sunglasses BlackSmoke 2.0Cheaters Sunglasses BlackSmoke 2.0
Combines protective riding safety glasses with reading glasses. This BlackSmoked version features: 5-position lens angle adjustment provides a customized fit. Cushioned non-slip rubber temple pads for superior comfort. Magnification diopter is molded into the polycarbonate lens. Lightweight nylon frame. High tech vented rubber nose piece. Exceeds the new ANSI Z87.1 standards and blocks 99.9 UV rays. FREE Protective Sleeve included.

Part Number: CH1-220
CAN$15.63

Cheaters Sunglasses BlackSmoke 2.5Cheaters Sunglasses BlackSmoke 2.5
Combines protective riding safety glasses with reading glasses. This BlackSmoked version features: 5-position lens angle adjustment provides a customized fit. Cushioned non-slip rubber temple pads for superior comfort. Magnification diopter is molded into the polycarbonate lens. Lightweight nylon frame. High tech vented rubber nose piece. Exceeds the new ANSI Z87.1 standards and blocks 99.9 UV rays. FREE Protective Sleeve included.

Part Number: CH1-225
CAN$15.63

Cheaters Sunglasses InOut Lenses 1.5Cheaters Sunglasses InOut Lenses 1.5
Combines protective safety glasses with reading glasses. This version features:. A clear indooroutdoor lens with a small mirror coating on it. The mirror coating reflects light and reduces glare. It also reflects artificial light while the clear lens allows in more light than a gray lens.. Cushioned non-slip rubber temple pads for superior comfort. Magnification diopter is molded into the polycarbonate lens. Lightweight nylon frame. High tech vented rubber nose piece. Exceeds the new ANSI Z87.1 standards and blocks 99.9 UV rays. FREE Protective Sleeve included

Part Number: CH1-915
CAN$15.63

Choko Trunk or Tour-Pak Rack BagChoko Trunk or Tour-Pak Rack Bag
Cordura Rear Rack Bag with quick attach system is made for most Trunk or Tour-Pak Racks. Durable easy to use item. A must have for all motorcycle enthusiasts.

Part Number: 30-8500-00
MSRP: CAN$39.14  Price: CAN$38.38

Chrome Air Compressor Cover setChrome Air Compressor Cover set
CNC machined from steel and triple chrome plated this cover dresses up your compressor when used in exposed locations. Recommended on Softails Sportsters Shadows 7501100 Indians VL1400 Intruder Victories and Viragos 7501100.

Part Number: CMPCR
CAN$31.3

Chrome Steel Hitch Ball with BoltChrome Steel Hitch Ball with Bolt
High quality hitch ball with a durable attractive nickel chrome finish. Also features fine threads for superior holding strength and is tested to meet U.S. V-5 specifications.

Part Number: GL18007-C
MSRP: CAN$11.71  Price: CAN$11.48

Chrome Windshield Accent Trim - 96-Up Touring HDChrome Windshield Accent Trim - 96-Up Touring HD
This chromed custom accent piece dresses up the front of your bike while showcasing the color of your fairing. The slotted design is laser cut from high-quality steel polished to a high luster finish and triple chrome plated. Attaches in minutes to the existing windshield mounting screws.

Part Number: HD900
MSRP: CAN$46.97  Price: CAN$46.22

Circuit Fuse BlockCircuit Fuse Block
A must have when adding electrical accessories. Fuse Block connects to the battery POS terminal. Gives you six additional separately fused circuits. Uses Standard ATC plug-in fuses measures 12x3x3. Includes 8 battery hook-up wire.

Part Number: FUSBLK
CAN$35.22

Classic Steel Adjustable Passenger Boards for Honda GL1800Classic Steel Adjustable Passenger Boards for Honda GL1800
This floorboard set is adjustable through a 6 range of motion and adjust in seconds by pulling the spring loaded locking pins for increased passenger comfort. These boards also greatly increase foot and leg support over stock boards. Our adjustable mounts US PAT: 7114739 are machined from billet aluminum with triple plated chrome triple plated chrome steel floorboards measure 8 x 5 and the pads are made of anti-vibration neoprene.

Part Number: GL18125A
MSRP: CAN$297.69  Price: CAN$292.24

Classic Steel Adjustable Passenger Floorboards for Honda ValkyrieClassic Steel Adjustable Passenger Floorboards for Honda Valkyrie
These floorboards are adjustable through a 6 range of motion. Adjust in seconds by pulling the spring loaded locking pins. They also can be adjusted from 1 below to 3 above the stock peg location. These boards greatly increase foot and leg support over the stock floorboards. The floorboard pads are made of anti-vibration neoprene ensuring passenger comfort. The boards are made from steel and triple chrome plated.

Part Number: VAL125A
MSRP: CAN$297.69  Price: CAN$292.24

Classic Steel Driver Floorboards - Triumph AmericaSpeedmasterClassic Steel Driver Floorboards - Triumph AmericaSpeedmaster
Gives your America or Speedmaster a customized look especially when used with our matching passenger boards and highway pegs. They bolt on in place of the stock pegs measure 8 x 5 provide full support for your feet and are tipped back towards the rider at a 15 angle for maximum comfort. The Classic Steel design is triple chrome plated and are also inlaid with anti-vibration neoprene rubber to further insure passenger comfort. The floorboards will fold up in the event of a tip over retain the stock shift and brake pedals while maintaining adequate foot room above and below.

Part Number: TA124
MSRP: CAN$180.17  Price: CAN$177.06

Classic Steel Driver Floorboards - Triumph Rocket IIIClassic Steel Driver Floorboards - Triumph Rocket III
Gives your Rocket a custom look especially when used with our matching passenger boards and highway pegs. Bolt on in place of the stock pegs measure 8 x 5 provide full support for your feet and are tipped back towards the rider at a 15 angle for maximum comfort. The Classic Steel design is triple chrome plated and also inlaid with anti-vibration neoprene rubber to further insure passenger comfort. The floorboards will fold up in the event of a tip over retain the stock shift and brake pedals while maintaining adequate foot room above and below. The set fits all models originally equipped with pegs.

Part Number: TR3124
MSRP: CAN$180.17  Price: CAN$177.06

Classic Steel Driver Floorboards for Honda VTX1800CVTX1300CClassic Steel Driver Floorboards for Honda VTX1800CVTX1300C
They bolt on in place of the stock driver pegs and measure 8 x 5 providing full support for your feet and room to move around during longer rides. This Classic Steel boards are triple chrome plated with soft anti-vibration neoprene rubber pads. The floorboards are hinged on their mounts and fold up in the event of a tip over. The set retains the stock shift and brake pedals while keeping adequate room above below.

Part Number: VTX124
MSRP: CAN$180.17  Price: CAN$177.06

Classic Steel Highway FloorboardsClassic Steel Highway Floorboards
These Classic Steel floorboards are polished to a flawless finish triple chrome plated and inlaid with soft anti-vibration neoprene rubber. 8 x 5.We angled the heels inward toward the center of the motorcycle at 100 and built in an adjustment screw so you can set them to be angled up where they hinge to your liking. They have a tall heel rest to prevent your foot from sliding down can be folded up when not in use and stay in place with spring-loaded detents. They come with 38 mounting bolts and will work with all RIVCO and most other brands mounts.

Part Number: HBPB12
MSRP: CAN$125.32  Price: CAN$123

Classic Steel Passenger Floorboards - Can-Am Spyder RSRS-SClassic Steel Passenger Floorboards - Can-Am Spyder RSRS-S
These passenger floorboards feature triple chrome plated steel boards with anti-vibration rubber and the set folds up when not in use. NOTE: Can be mounted with RIVCOs optional CA0005-5 5 or CA005-6 7 Relocation Arms for Can-Am Spyder RSRS-S models.

Part Number: CA125
MSRP: CAN$180.17  Price: CAN$177.06

Classic Steel Passenger Floorboards - Suzuki M109Classic Steel Passenger Floorboards - Suzuki M109
Great Touring Comfort Keep your passengers comfortable and happy. Replace your existing foot pegs with our 8 x 5 Classic Steel floorboards. You will find the soft neoprene rubber inlays greatly reduce vibration and reduce fatigue on long trips. Their size shape and angles also increase comfort as well as give your bike that highly-customized look. This set is triple chrome-plated and comes with all required hardware.

Part Number: SM9125
MSRP: CAN$180.17  Price: CAN$177.06

Classic Steel Passenger Floorboards - Triumph AmericaSpeedmasterClassic Steel Passenger Floorboards - Triumph AmericaSpeedmaster
Great Touring Comfort Replace your existing foot pegs with our 8 x 5 Classic Steel floorboards. You will find the soft neoprene rubber inlays greatly reduce vibration and reduce fatigue on long trips. Their size shape and angles also increase comfort as well as give your bike that highly-customized look. The set is triple chrome-plated and comes with all required hardware.Also available are optional TA005-5 Relocation Arms to move the passenger floorboards another 4 forward and allow three different height positions for much needed passenger comfort and additional heel room.

Part Number: TA125
MSRP: CAN$180.17  Price: CAN$177.06

Classic Steel Passenger Floorboards - Triumph Rocket IIIClassic Steel Passenger Floorboards - Triumph Rocket III
Great touring comfort Keep your passengers comfortable and happy. Replace your existing foot pegs with our 8 x 5 Classic Steel floorboards. With all the same great features as our Driver Floorboards they fit all models originally equipped with pegs. If using with Corbin saddlebags you must also order the Corbin-use Saddlebag Bracket Set TR3005-6. Shown with optional Relocation Arms TR3005-5 sold separately.

Part Number: TR3125
MSRP: CAN$180.17  Price: CAN$177.06

Classic Steel Passenger Floorboards for Honda Valkyrie RuneClassic Steel Passenger Floorboards for Honda Valkyrie Rune
Set up your Rune with a set of these triple chrome plated RIVCO Classic Steel passenger boards and a two-up touring saddle available from Corbin and youll have the hottest bike AND be able to take your favorite passenger on your next ride. The specially designed mounts bolt securely to the mainsub frame mounting bolts. The mounts then protrude through openings easily made in the chrome side covers using layout templates provided with the set. The boards then attach to the mounts using only one bolt on each board. They fold up when not in use - when you want to return the bike to its solo look. NOTE: Optional chrome caps are available separately.

Part Number: NRX125
MSRP: CAN$313.36  Price: CAN$307.12

Classic Steel Passenger Floorboards for Honda VTX18001300 VT1100 and VT1300 modelsClassic Steel Passenger Floorboards for Honda VTX18001300 VT1100 and VT1300 models
Great Touring Comfort Keep your passengers comfortable and happy. Replace your existing foot pegs with our 8 x 5 Classic Steel floorboards. You will find the soft neoprene rubber inlays greatly reduce vibration and fatigue on long trips. Their size shape and angles also increase comfort as well as give your bike that highly-customized look. The set is triple chrome-plated and comes with all required hardware. Fits all models.Also available are optional VTX005-5 Relocation Arms to move the passenger floorboards another 3 12 forward and allow different height positions for much needed passenger comfort and additional heel room.

Part Number: VTX125
MSRP: CAN$180.17  Price: CAN$177.06

Classic Steel Passenger Floorboards for Yamaha Road StarClassic Steel Passenger Floorboards for Yamaha Road Star
Great touring comfort Keep your passengers comfortable and happy- Replace your existing foot pegs with our 8 x 5 Classic Steel floorboards. Plus the mounts move the boards 2 farther forward 2 lower than the stock peg You will find the soft neoprene rubber inlays greatly reduce vibration and reduce fatigue on long trips. The set is triple chrome plated and comes with all required hardware.

Part Number: XV17125
MSRP: CAN$180.17  Price: CAN$177.06

Classic Steel Passenger Floorboards for Yamaha XV19 RoadlinerStratolinerClassic Steel Passenger Floorboards for Yamaha XV19 RoadlinerStratoliner
Great touring comfort Keep your passengers comfortable and happy. Replace your existing foot pegs with our 8 x 5 Classic Steel floorboards. Plus the mounts move the boards 2 farther forward 2 lower than the stock peg You will find the soft neoprene rubber inlays greatly reduce vibration and reduce fatigue on long trips. This set is triple chrome plated and comes with all required hardware.

Part Number: XV19125
MSRP: CAN$180.17  Price: CAN$177.06

Differential Ring - Triumph Rocket III Standard and ClassicDifferential Ring - Triumph Rocket III Standard and Classic
Covers the unattractive black plastic spacer between the differential and rear wheel. Easy to install wraps around the differential housing tightens using a single setscrew and nut which are hidden from sight. This is a great cosmetic improvement to the back end with little effort or cost. Triple chrome plated steel.

Part Number: TR3090
MSRP: CAN$70.48  Price: CAN$69.72

Driver Boards for Triumph AmericaDriver Boards for Triumph America
Give your bike a highly customized look - especially when used with our matching passenger boards and highway pegs. Bolting on in place of the stock pegs they measure 8 x 5 provide full support for your feet and are tipped back towards the rider at a 15 angle for maximum comfort. Machined from billet aluminum hand-polished to a flawless finish and triple chrome plated these boards are also inlaid with soft anti-vibration neoprene rubber. The floorboards are hinged on their mounts will fold up in the event of a tip over and retain the stock shift and brake pedals while maintaining adequate foot room above and below.

Part Number: TA024
MSRP: CAN$227.18  Price: CAN$223.29

Driver Floorboard Set - Can-Am Spyder RS RS-SDriver Floorboard Set - Can-Am Spyder RS RS-S
ulliA driver floorboard set that offers folding sport pegs and features aircraft aluminum and steel parts. liThis set has full sized 12 x 5 floorboards with rubber mounted pads and the boards location places your feet 4 forward and 2 lower than the stock pegs greatly increasing leg room and comfort.ul

Part Number: CA020-WO
MSRP: CAN$274.19  Price: CAN$268.73

Driver Floorboard Set with Heel-Toe Shifter - Can-Am Spyder RSRS-SDriver Floorboard Set with Heel-Toe Shifter - Can-Am Spyder RSRS-S
This driver floorboard set with heel-toe shifter removable for automatic models and folding sport pegs features aircraft aluminum and steel parts. The set features full sized 12 x 5 floorboards with rubber mounted pads and their location places your feet 4 forward and 2 lower than the stock pegs greatly increasing leg room and comfort.

Part Number: CA020
MSRP: CAN$313.36  Price: CAN$307.12

Driving Lights for the Can-Am SpyderDriving Lights for the Can-Am Spyder
This compact set of driving lights is designed to give maximum light right where you need it - on the road. Attached to the upper suspension arms these lights feature 55 watt halogen bulbs in black-powder coated steel housings which are attached with black powder coated aircraft aluminum mounts designed specifically for the Spyder. The lights offer an incredible amount of light through 2.5 x 4.5 lenses and include switch relay plug and play wiring harnesses plus easy to understand instructions. This set fits all models.

Part Number: CA006
MSRP: CAN$180.17  Price: CAN$177.06

Driving Lights for Triumph AmericaDriving Lights for Triumph America
Gives your America a classic look as well more than doubling your forward and side illumination of the highway. This triple chrome-plated billet aluminum design - includes 4.5 35 watt driving lights turn signal relocation adapters onoff switch and all wiring. The set is compatible with all windshields. All the wires are concealed in the lightbar and lights are spaced at 16 center-to-center with an overall length of 17.75.

Part Number: TA006
MSRP: CAN$219.34  Price: CAN$215.45

Electric Horn Hardware Kit - HD Dyna ModelsElectric Horn Hardware Kit - HD Dyna Models
Hardware kit used to install our Magnum electric horns onto Harley Davidsons Dyna models. Mounts on lower right side of swingarmhidden. Kits include a relay fuse all wiring and mounting hardware along with detailed instructions.

Part Number: EH280
CAN$31.3

Electric Horn Hardware Kit - HD Touring Models 09 - upElectric Horn Hardware Kit - HD Touring Models 09 - up
Hardware kit used to install our Magnum electric horns onto Harley Davidson touring models. Mounts on lower right side of swingarmhidden. Kits include a relay fuse all wiring and mounting hardware along with detailed instructions.

Part Number: EH275
CAN$31.3

Electric Horn Hardware Kit - HD Touring Models up to 08Electric Horn Hardware Kit - HD Touring Models up to 08
Hardware kit used to install our Magnum electric horns onto Harley Davidsons touring models. Mounts on lower right side of swingarmhidden. Kits include a relay fuse all wiring and mounting hardware along with detailed instructions.

Part Number: EH270
CAN$31.3

Electric Horn Hardware Kit - Honda GL1500Electric Horn Hardware Kit - Honda GL1500
Hardware kit used to install our Magnum electric horns onto GL1500s. Mounts behind engine below the swingarmhidden. Includes relay fuse all wiring and mounting hardware along with detailed instructions.

Part Number: EH210
CAN$31.3

Electric Horn Hardware Kit - Honda ValkyrieElectric Horn Hardware Kit - Honda Valkyrie
Hardware kit used to install our Magnum electric horns onto Honda Valkyries. Mounts behind engine below the swingarmhidden. Kits include a relay fuse all wiring and mounting hardware along with detailed instructions.

Part Number: EH230
CAN$31.3

Electric Horn Hardware Kit - Honda VTXsElectric Horn Hardware Kit - Honda VTXs
Hardware kit used to install our Magnum electric horns onto Honda VTXs. Mounts behind engine below the swingarmhidden. Kits include a relay fuse all wiring and mounting hardware along with detailed instructions.

Part Number: EH220
CAN$31.3

Electric Horn Hardware Kit - Multi-ApplicationElectric Horn Hardware Kit - Multi-Application
Includes all required hardware and wiring to install a set of Magnum Electric Horn Set ELCHRN on most other models. The kit includes relay fuse wiring and mounting hardware along with general instructions.

Part Number: EH500
CAN$31.3

Electric Horn Hardware Kit - Suzuki M109Electric Horn Hardware Kit - Suzuki M109
Hardware kit used to install our Magnum electric horns onto the Suzuki M109. Mounts behind the rear cylinder on each side. Kits include a relay fuse all wiring and mounting hardware along with detailed instructions.

Part Number: EH320
CAN$31.3

Electric Horn Hardware Kit - Triumph AmericaSpeedmasterElectric Horn Hardware Kit - Triumph AmericaSpeedmaster
Hardware kit used to install our Magnum Electric Horn Set onto Triumph America and Speedmaster. Mounts at lower rear of enginehidden. Kits include a relay fuse all wiring and mounting hardware along with detailed instructions.

Part Number: EH290
CAN$31.3

Electric Horn Hardware Kit - Triumph Rocket III - Not for use in CaliforniaElectric Horn Hardware Kit - Triumph Rocket III - Not for use in California
Hardware kit used to install Rivcos Magnum Electric Horn Set onto Triumph Rocket IIIs. Mounts behind engine below the swingarmhidden. Kits include a relay fuse all wiring and mounting hardware along with detailed instructions.

Part Number: EH240
CAN$31.3

Electric Horn Hardware Kit - Victory KingpinElectric Horn Hardware Kit - Victory Kingpin
Hardware kit used to install our Magnum Electric Horn Set onto the Victory Kingpin. Mounts behind the engine and below the swingarm. Kits include a relay fuse all wiring and mounting hardware along with detailed instructions.

Part Number: EH310
CAN$31.3

Electric Horn Hardware Kit - Yamaha Road StarElectric Horn Hardware Kit - Yamaha Road Star
Hardware kit used to install our Magnum electric horns onto the Yamaha Road Star. Mounts in stock horns location. Kits include a relay fuse all wiring and mounting hardware along with detailed instructions.

Part Number: EH300
CAN$31.3

Engine Guard Clamps 1.25inEngine Guard Clamps 1.25in
A pair of 3-piece Heavy Duty Steel Clamps with Chrome Finish. While not offering any range of motion or adjustment like our other premium highway mounts these are a good economical choice for highway peg mounting. They will work on any 1 engine guard and will accept most pegs. Sold in pairs only. Fits 21.3mm SW-MOTECH crashbars.

Part Number: CLMP125
CAN$19.55

Engine Guard Clamps 1.25in BlackEngine Guard Clamps 1.25in Black
A pair of 1.25 inch diameter 3pc Heavy-Duty steel clamps with satin black powder coat finish. Use with almost any peg to attach to 1.25 inch engine guards.While not offering any range of motion or adjustment like our other premium highway mounts these are a good economical choice for highway peg mounting. They will work on any 1.25 diameter engine guard and will accept most pegs. Sold in pairs only.

Part Number: CLMP125BK
CAN$25.03

Engine Guard Clamps 1inEngine Guard Clamps 1in
A pair of 3-piece Heavy Duty Steel Clamps with Chrome Finish. While not offering any range of motion or adjustment like our other premium highway mounts these are a good economical choice for highway peg mounting. They will work on any 1 engine guard and will accept most pegs. Sold in pairs only. Fits 21.3mm SW-MOTECH crashbars.

Part Number: CLMP1
CAN$19.55

Engine Guard Clamps 1in BlackEngine Guard Clamps 1in Black
A pair of 3-piece Heavy Duty steel clamps with chrome finish. While not offering any range of motion or adjustment like our other premium highway mounts these are a good economical choice for highway peg mounting. They will work on any 1 inch engine guard and will accept most pegs. Sold in pairs only. Fits 21.3mm SW-MOTECH crashbars.

Part Number: CLMP1BK
CAN$25.03

Engine Guard Clamps 78inEngine Guard Clamps 78in
A pair of 3-piece Heavy Duty steel clamps with chrome finish. While not offering any range of motion or adjustment like our other premium highway mounts these are a good economical choice for highway peg mounting. They will work on any 78 engine guard and will accept most pegs. Sold in pairs only. Fits 21.3mm SW-MOTECH crashbars.

Part Number: CLMP87
CAN$19.55

Engine Guard Clamps 78in BlackEngine Guard Clamps 78in Black
A pair of 3-piece Heavy Duty steel clamps with a satin black powder coat finish. While not offering any range of motion or adjustment like our other premium highway mounts these are a good economical choice for highway peg mounting. They will work on any 78 engine guard and will accept most pegs. Sold in pairs only. Fits 21.3mm SW-MOTECH crashbars.

Part Number: CLMP87BK
CAN$25.03

Engine Guard Mounts - 1 inchEngine Guard Mounts - 1 inch
These all aluminum highway mounts are CNC machined from aircraft quality billet aluminum. This design makes the mounts strong enough that you can stand on the mounts and they WILL NOT SLIPThe 6 long arms have a full 360 degree range of motion to accommodate any leg length. The arms lock into the selected position with an internal locking pin. The mounts can be used with RIVCO pegs and floorboards or any other peg having up to a 38 mounting bolt. The set is triple chrome plated comes with all stainless steel hardware and detailed mounting instructions.

Part Number: GL18004
MSRP: CAN$109.65  Price: CAN$108.12

Engine Guards - Triumph Rocket IIIEngine Guards - Triumph Rocket III
This engine guard set follows the contour of the Triumph Rocket III radiator as well as being angled at the bottom to prevent dragging during hard cornering and provides protection for the gas tank pegs and radiator in the event of a tip over. Keep your motorbike safe and looking great too Because they are made from a heavy wall 1 inch tube and the sides meet and interlock at the top they are very sturdy. They are polished triple chrome plated install in easily and will accept our GL18004 Highway Mounts and any RIVCO pegs or the CLMP1 with any RIVCO pegs. Also fits the 2010 Triumph Rocket III ROADSTER

Part Number: TR3050
MSRP: CAN$180.17  Price: CAN$177.06

Exhaust Flange Covers - Triumph Rocket IIIExhaust Flange Covers - Triumph Rocket III
This set of 3 covers bolt on in minutes and completely cover the unsightly blue and brown discoloration of the exhaust pipes between the engine and the stock chrome heat shields. What an improvement Once you see how much better and finished the exhaust looks with these covers installed youll wonder why your motorbike didnt come this way from the factory. The first the original and still the best

Part Number: TR3012
MSRP: CAN$50.89  Price: CAN$50.14

Flame Windshield Trim - 99-Up HDFlame Windshield Trim - 99-Up HD
This is a very custom accent chrome piece that really dresses up the front of your Classic or Ultra Classic. The flame design is laser cut from high-quality steel polished to a flawless finish and triple chrome-plated. Attaches in minutes to the existing windshield mounting screws.

Part Number: HD800
MSRP: CAN$62.64  Price: CAN$61.89

Flashing Brake Light ModulatorFlashing Brake Light Modulator
This flasher module will work with any set of LEDs. It will allow them to function as a FLASHING tail and brake light. The brake light will flash 3 times per second for 5 seconds and then stay on steady. The module is 12 square by 1 long allowing it to be easily concealed and has a peel-and-stick adhesive backing. For LED lights only.

Part Number: FLSH
CAN$27.38

Flat Foot Wide Anti-Vibration Highway Pegs pairFlat Foot Wide Anti-Vibration Highway Pegs pair
Machined from billet aluminum triple chrome plated. Flat on top to match the bottom of your shoe adding maximum comfort and support with a custom look. Soft neoprene rubber inlays absorb vibration to reduce fatigue in your legs. Also has an adjusting setscrew to keep the pegs at your desired position. Comes with 38 bolts and can be used with all RIVCO highway mounts or as rider pegs with our peg adapters PEGSHA

Part Number: PEGSW
MSRP: CAN$62.64  Price: CAN$61.89

FLHR with Saddlebag Rails BracketFLHR with Saddlebag Rails Bracket
Road King owners with saddlebag Guard Rails will need to use these brackets to provide some necessary clearance when adding our PF910 Parade Flag Holder. Sold in pairs.

Part Number: PF910-4
CAN$15.63

Front Mount Air Horns - GL1800Front Mount Air Horns - GL1800
BE SAFE BE HEARD Mounts to front right side engine guard. An Ear Piercing Blow of 128 decibels Mount to the front right side engine guard. System sold complete with all pre-measured wires and hoses cut to length. The air compressor creates instant air pressure to the horns. Since the pressure is created so fast there is no need for a storage tank as on Semi Trucks and RVs. Although the pressure is very low 12-15 psi it delivers a large volume of air 3 CFM or cubic feet per minute. This low-pressure high volume air supply causes the diaphragm inside the horn to vibrate at a high rate of speed or frequency the exact speed at which it vibrates is varied by the length of the horn or trumpet. Together the horn set produces an extremely loud 128-decibel warning blast. This is approximately 4 times louder than most electric motorcycle horns which usually rate at 87 decibels.

Part Number: AHGL18F
MSRP: CAN$156.66  Price: CAN$153.56

Front Mount Air Horns for Honda ValkyrieFront Mount Air Horns for Honda Valkyrie
Valkyrie Front Mount Air Horns.Valkyrie Air Horns These air horns give a loud warning blast of 128 decibels Uses the stock horn button. Can be easily installed in 20-30 minutes. The trumpets are triple plated chrome as well as the mounts and brackets so the shine and finish will last for years to come. They are completely waterproof. No cutting drilling or welding is required. The kit is a bolt on plug in installation. Trumpet covers are included which mount to the front of the trumpets. One year unlimited warranty. Replaces stock horn and the compressor are mounted behind the right side cover. All kits include two horns air compressor relay simple wiring and complete installation instructions. For Valkyrie Interstate see separate Air Horns for that model item number AHVIL. Air Horns work with Baker Air Wings. The air compressor creates instant air pressure to the horns. Since the pressure is created so fast there is no need for a storage tank as on Semi Trucks and RVs. Although the pressure is very low 12-15 psi it delivers a large volume of air 3 CFM or cubic feet per minute. This low-pressure high volume air supply causes the diaphragm inside the horn to vibrate at a high rate of speed or frequency the exact speed at which it vibrates is varied by the length of the horn or trumpet. Together the horn set produces an extremely loud 128-decibel warning blast. This is approximately 4 times louder than most electric motorcycle horns which usually rate at 87 decibels.

Part Number: AHVAL
MSRP: CAN$156.66  Price: CAN$153.56

Front Turn Signal Relocators 39mm set - HD DynaFront Turn Signal Relocators 39mm set - HD Dyna
These new front turn signal relocators move your signals from the hand grip area of the handlebar to the front fork below the headlight for a clean custom look. They are CNC machined from billet aluminum and triple chrome plated. Retains the stock wiring and is easy to install. Hardware and easy to follow instructions included. At 39mm these relocators fit all Dynas except Wide Glide 2005 older.

Part Number: FXD104-39
MSRP: CAN$54.81  Price: CAN$54.05

Front Turn Signal Relocators 41mm set - HD DynaFront Turn Signal Relocators 41mm set - HD Dyna
These new front turn signal relocators move your signals from the hand grip area of the handlebar to the front fork below the headlight for a clean custom look. They are CNC machined from billet aluminum and triple chrome plated. Retains the stock wiring and is easy to install. Hardware and easy to follow instructions included. At 39mm these relocators fit all Dynas except Wide Glide 2005 older.

Part Number: FXD104-41
MSRP: CAN$54.81  Price: CAN$54.05

Front Turn Signal Relocators 70mm set - Triumph America 07 and newerFront Turn Signal Relocators 70mm set - Triumph America 07 and newer
This kit consists of two split clamps that attach to the fork tubes. The original signals mount directly to the split clamps. This greatly cleans up and improves the look of the bike by tucking the signals in close to the forks and eliminating the unattractive black handlebar signal mounts.

Part Number: TA104-70
MSRP: CAN$62.64  Price: CAN$61.89

Front Turn Signal Relocators set - Triumph America 02 to 06Front Turn Signal Relocators set - Triumph America 02 to 06
This kit consists of two split clamps that attach to the fork tubes. The original signals mount directly to the split clamps. This greatly cleans up and improves the look of the bike by tucking the signals in close to the forks and eliminating the cheap black handlebar signal mounts.

Part Number: TA104
MSRP: CAN$62.64  Price: CAN$61.89

GL1800 Adjustable Passenger BoardsGL1800 Adjustable Passenger Boards
These floorboards are adjustable through a 4 range of motion. Adjusts in seconds by pulling the spring loaded locking pins. These boards greatly increase foot and leg support over the stock floorboards. The floorboard pads are made of anti-vibration neoprene ensuring passenger comfort. The boards are CNC machined from billet aluminum and triple chrome plated.

Part Number: GL18005A
MSRP: CAN$336.87  Price: CAN$330.63

GL1800 Chrome Handlebar EndsGL1800 Chrome Handlebar Ends
Replica of stock except these are triple plated CHROME and bolt on in place of the stock ends using the included stainless steel screws. Adds a nice touch to the handlebars thatll have other GL1800 owners scratching their heads wondering why their bikes didnt come with chrome ends Sold as a pair.

Part Number: GL18009
CAN$23.47

GL1800 Driver Boards Shifter Peg ExtensionGL1800 Driver Boards Shifter Peg Extension
This allows you to upshift or downshift with your toe as well as provide additional board space for size 15 and larger boots. Requires lifting your entire foot from board to down shift.

Part Number: GL18020-SE
CAN$28.95

GL1800 Illuminated ControlsGL1800 Illuminated Controls
FINALLY SEE YOUR CONTROLS AT NIGHT Illuminated Rider Controls. Illuminates the unlighted portion of your stock GL1800 rider controls. This material was first developed by NASA for their space program and now is available to the public. Paper-thin illuminated lighting decals match the stock text and symbols. No disassembly of the switch housing is required. Plugs into the existing handlebar wires. NO cutting or splicing. Installs in 30-45 minutes.

Part Number: GL18001
MSRP: CAN$109.65  Price: CAN$108.12

GL1800 Inner Back Trunk OrganizerGL1800 Inner Back Trunk Organizer
Keep you trunk clean and organized find what you are looking for quickly by attaching this organizer to the inner back or rear of the trunk. Has mesh pockets for easy viewing and pockets close securely with Velcro.

Part Number: GL18062
CAN$19.55

GL1800 Passenger Board RisersGL1800 Passenger Board Risers
Billet Aluminum Risers allow 4 of height adjustment for the passenger floorboards and at the same time bring the foot position 12 back from stock. Reverse the risers and they allow the foot position to go 12 forward. Triple chrome plated installs in minutes.

Part Number: GL18005
MSRP: CAN$78.31  Price: CAN$76.78

GL1800 Rack Mounting SystemGL1800 Rack Mounting System
Designed specifically for the GL1800 this is an inexpensive quick and easy to install alternative to a complete trailer towing hitch and wiring that enables the use of a rack. The vertical receiver portion bolts easily to the frame behind the rear fender. The tongue slides into the receiver and is held in place by a locking hitch pin with two height adjustments. The chrome receiver bracket supplied with either rack bolts directly to the top of the tongue. The racks two large mounting rods slip into the chrome receiver bracket and are secured by two small wire clips supplied. The rack andor tongue can be removed or installed in seconds by removing the tongue pin. The receiver is finished in gloss black powder coat and the tongue is finished with a tough bright Zinc plating.

Part Number: GL18011
MSRP: CAN$109.65  Price: CAN$108.12

GL1800 Saddlebag Lid OrganizersGL1800 Saddlebag Lid Organizers
Sold in pairs. Organize your saddlebags with these Choko Design organizers. They attach to the inside of the saddlebag lids easily have mesh pockets for easy viewing and Velcro closures to secure your property.

Part Number: GL18061
CAN$31.3

GL1800 Sidestand PadGL1800 Sidestand Pad
This clever kickstand pad slides over the stock kickstand foot and is secured with a setscrew. It has over 2 times the surface area of the original foot. No more worries about your motorcycle falling over or fumbling around looking for your kickstand plate. CNC machined from billet aluminum. GL1800 model is black anodized. Will not work with RIVCOs GL18020 Driver Floorboards.

Part Number: GL18013
CAN$23.47

GL1800 TrunkSaddlebag Deluxe Carpet SetGL1800 TrunkSaddlebag Deluxe Carpet Set
This set of 3 deluxe carpets line the bottom of your trunk and saddlebags stopping items from rolling around and protecting other items from damage.

Part Number: GL18063
CAN$35.22

Half Lid Organizer - Honda GL1800Half Lid Organizer - Honda GL1800
This Choko brand half lid organizer is made for the Goldwing GL1800 Series. It allows for two full face helmets in the trunk. Has 3 individual pouches that Velcro shut to keep all your belongings in place. A must have item for the motorcycle rider who likes to carry extras.

Part Number: 31-0892-00
CAN$19.55

Handlebar Clamp Mount Cup Holder Chrome - 78 inch to 1-14 inch BarsHandlebar Clamp Mount Cup Holder Chrome - 78 inch to 1-14 inch Bars
An accessory capable of holding drink containers beverages cell phones sunglasses radios and keys. It features a separate inner insulated lining that detaches easily from the stainless steel beverageaccessory holder and chrome-plated mounting hardware. Foam inserts accommodate 12 oz. cans 16 and 20 oz. bottles. Fits most 78 to 1.25 handlebars. Comes individually boxed with an Allen wrench for easy assembly.

Part Number: CH200
CAN$35.22

Handlebar Clamp Mount Cup Holder Leather - 78 inch to 1-14 inch BarsHandlebar Clamp Mount Cup Holder Leather - 78 inch to 1-14 inch Bars
A leather-wrapped accessory capable of holding drink containers beverages cell phones sunglasses radios and keys. It features a separate inner insulated lining that detaches easily from the stainless steel beverageaccessory holder and chrome-plated mounting hardware. Foam inserts accommodate 12 oz. cans 16 and 20 oz. bottles. Fits most 78 to 1.25 handlebars. Comes individually boxed with an Allen wrench for easy assembly.

Part Number: CH400
MSRP: CAN$43.05  Price: CAN$42.3

Handlebar Risers - Can-Am SpyderHandlebar Risers - Can-Am Spyder
ulliThis set of risers will bring the handlebars back toward the rider 3 significantly reducing the riders reach to the bars as well as back and neck strain. liThe height and pull back can be easily adjusted to suit the riders size and preferences. liThey install easily and retain all stock cables hoses and wiring. liThese handlebar risers will fit both manual and automatic transmission models. liThe set is CNC machined from billet aircraft aluminum and will have a black anodized finish to blend in and prevent corrosion. liIncluded are new handlebar tubes all stainless steel hardware matching black tube end plugs and detailed installation instructions.ul

Part Number: CA017
MSRP: CAN$156.66  Price: CAN$153.56

Handlebar Risers - Chrome - Triumph Thunderbird 09 - NewerHandlebar Risers - Chrome - Triumph Thunderbird 09 - Newer
ulliThese triple chrome plated handlebar risers are CNC machined from billet aluminum. liThey replace the stock T-bird risers bringing the handlebars back toward the rider 2. liBecause they create a much more relaxed seating position they significantly reduce rider back strain. liThese risers retain all stock cables hoses and wiring and are easy to install. liSet includes matching caps and fits all 2009 and newer models.ul

Part Number: TB017
MSRP: CAN$133.16  Price: CAN$130.84

Handlebar Risers - Honda Valkyrie Rune 04 - 05Handlebar Risers - Honda Valkyrie Rune 04 - 05
ulliThis set of billet risers are a bolt-on extension and cover plate to the original riser. liThey are machined from billet aluminum polished to a flawless finish triple chrome plated and have a seamless fit. liThey will bring the bars up 14 and back 2 12. liThey work with both the A lower and B higher handlebars from Honda. liThe set includes all necessary hardware and a longer braided stainless steel brake line as well as complete instructions.ul

Part Number: NRX017
MSRP: CAN$227.18  Price: CAN$223.29

Handlebar Risers - Vulcan Classics Nomads 15001600 and 2000Handlebar Risers - Vulcan Classics Nomads 15001600 and 2000
These risers are CNC machined from billet aluminum then polished to a mirror finish and triple chrome plated. They bring the bars back a full 2 and up 34. This significantly reduces rider back neck and shoulder strain and allows for a more relaxed riding position. They bolt on in minutes and retain all stock hoses and cables. Our Nomad ridercustomers have told us that these risers work perfectly with the factory Fire Steel Tachs.Note: Comes with bolts and washers for the bottom utilizes stock caps and bolts on the top.

Part Number: VUL017
MSRP: CAN$143.34  Price: CAN$141.02

Handlebar Risers Chrome for Triumph AmericaHandlebar Risers Chrome for Triumph America
This set of handlebar risers are CNC machined from billet aluminum. Polished to a flawless finish and triple chrome-plated. They replace the stock risers and bring the handlebars back toward the rider 2. This significantly reduces the riders back strain. Allows for a more relaxed cruiser style of riding. Easy to install retains all stock cables hoses and wiring. This set also includes matching clamps.

Part Number: TA017
MSRP: CAN$143.34  Price: CAN$141.02

Handlebar Risers for HD DynasHandlebar Risers for HD Dynas
This set replaces the stock risers and will bring the handlebars up 1 and back toward the rider 2. While it may not seem like a lot the 2 gives you a much more upright seating position rather than reaching over the gas tank. This will significantly reduce back neck and shoulder fatigue. They are machined from billet aluminum and are triple chrome plated. Uses the original hoses and cables with only minor rerouting required. Fits FXDB Dyna StreetBob: all years FXDC Dyna Custom: 1995 up FXDL Dyna Low Rider: 1994 through 2006 and FXDWG Dyna Wide Glide: 1994 through 2005.

Part Number: FXD017
MSRP: CAN$125.32  Price: CAN$123

Handlebar Risers for Triumph SpeedmasterHandlebar Risers for Triumph Speedmaster
These triple chrome plated finished handlebar risers are CNC machined from billet aluminum. Replacing the stock risers they bring the handlebars back toward the rider 2. They create a more relaxed cruiser style of riding by significantly reducing the riders back strain. Easy to install these retain all stock cables hoses and wiring. Set also includes matching clamps.

Part Number: TS017
MSRP: CAN$143.34  Price: CAN$141.02

Handlebar Risers with Caps - Triumph Rocket IIIHandlebar Risers with Caps - Triumph Rocket III
While it may not seem like a lot 1 inch up and 2 inch back towards the rider gives you a much more upright seating position rather than reaching over the gas tank. This will significantly reduce back neck and shoulder fatigue. These risers are machined from billet aluminum and are triple chrome plated. They use the original motorbike hoses and cables with only minor re-routing required.

Part Number: TR3017
MSRP: CAN$143.34  Price: CAN$141.02

Handlebar Risers with Caps - Triumph Rocket III TouringHandlebar Risers with Caps - Triumph Rocket III Touring
While it may not seem like a lot 1 inch up and 2 inch back towards the rider gives you a much more upright seating position rather than reaching over the gas tank. This will significantly reduce back neck and shoulder fatigue. These risers are machined from billet aluminum and are triple chrome plated. They use the original motorbike hoses and cables with only minor re-routing required.

Part Number: TR3017-TR
MSRP: CAN$143.34  Price: CAN$141.02

Harley Davidson Adjustable Passenger Board Mounts - 80-Up FLT FLH and FLTRHarley Davidson Adjustable Passenger Board Mounts - 80-Up FLT FLH and FLTR
These mounts are the same as used in all of our other Adjustable Passenger Board sets but they do not include the floorboards. They are machined to accept either the stock Harley Davidson floorboards or any direct fit accessory floorboard. They can be adjusted in seconds through a 6 range of motion by simply pulling out the spring loaded lock pins then moving the board up or down until the pin clicks into the next position. Comes with all the same features as our other adjustable floorboard sets. Bikes with Rinehart exhaust can use our HDPBLA-RE kit.

Part Number: HDPBLA
MSRP: CAN$258.52  Price: CAN$253.85

Harley Davidson Adjustable Passenger Board Mounts for Rinehart Exhaust - 80-Up FLT FLH and FLTRHarley Davidson Adjustable Passenger Board Mounts for Rinehart Exhaust - 80-Up FLT FLH and FLTR
These mounts are the same as used in all of our other Adjustable Passenger Board sets but they do not include the floorboards. They are machined to accept either the stock Harley Davidson floorboards or any direct fit accessory floorboard. They can be adjusted in seconds through a 6 range of motion by simply pulling out the spring loaded lock pins then moving the board up or down until the pin clicks into the next position. Comes with all the same features as our other adjustable floorboard sets.

Part Number: HDPBLA-RE
MSRP: CAN$258.52  Price: CAN$253.85

Harley Davidson Adjustable Passenger Board Mounts for Rinheard Exhaust - 80-Up FLT FLH and FLTRHarley Davidson Adjustable Passenger Board Mounts for Rinheard Exhaust - 80-Up FLT FLH and FLTR
Peg adapters that allow you to replace stock Dyna foot pegs with any RIVCO peg set for added comfort and good appearance. HDPWA will fit on optional passenger arms for the Dyna.

Part Number: HDPWA
CAN$23.47

Heel Toe Shifter - Triumph Rocket III StandardHeel Toe Shifter - Triumph Rocket III Standard
This custom designed Heel-Toe Shifter is highly polished and triple chrome plated. Included are chrome billet shifter Peg Set with rubber inserts. Works with RIVCO Driver Boards TR3024 or stock foot pegs.

Part Number: TR3026
MSRP: CAN$109.65  Price: CAN$108.12

Heel-Toe Shifter - Can-Am Spyder RS RS-SHeel-Toe Shifter - Can-Am Spyder RS RS-S
ulliA heel-toe shifter that features aircraft aluminum and steel parts. liFor manual shift models.ul

Part Number: CA020-26
MSRP: CAN$101.82  Price: CAN$100.28

Hidden Air Horns for the ValkyrieHidden Air Horns for the Valkyrie
Mount under the bike to the exhaust bolts one trumpet on each side. Compressor is mounted under the right hand side cover. Same 125 decibels blast concealed location.

Part Number: AHVIH
MSRP: CAN$156.66  Price: CAN$153.56

Hidden Receiver Type Hitch - All Aluminum - Honda GL1800 Gold WingHidden Receiver Type Hitch - All Aluminum - Honda GL1800 Gold Wing
ulliSuper strong super light completely hidden Gold Wing trailer hitch. liMachined entirely out of aircraft aluminum weighing in at less than 8 lbs. liAttaches to the MAIN FRAME ONLY no flimsy sub-frame attachments as seen in other brands and is compatible with both Heim joint and ball style couplers. liThe hitch is strong enough to lift the 834lb. liGL1800 yet it does not restrict the ability to remove the rear tire. liThe key to its superior strength and rigidity is lightweight aircraft aluminum and proper basic design elements like perfect triangulation of the mounting points not heavy masses of steel. liThe package includes the hitch and a triple chrome plated 3 drop tongue.ul

Part Number: GL18007-30
MSRP: CAN$235.01  Price: CAN$230.34

Highway Peg Mount Set - Black - Can-Am SpyderHighway Peg Mount Set - Black - Can-Am Spyder
ulliIncreased comfort for Spyder riders. liIts no secret that the Spyder has a very sport bike type seating and peg position which is not the most comfortable on long rides. liRIVCOs highway peg mount set gives you a chance to stretch out and relax on the highway by moving your feet 12 - 16 forward from the foot pegs. liThe pivoting arms bolt directly to the frames engine mounting bolts and offer a 4 range of motion forward until touching the bodywork. liWe laser cut the steel base plates mandrel bend the tubular arms TIG weld them by hand for strong rigid mounting and perfect fit then finish them in satin black powder coat. liThey work with all our pegs shown with RIVCO Black Anti-Vibration Pegs Part PEGSBK and any others using 38 mounting bolts. liThe set bolts on easily without any modification and fit with or without RIVCO floorboards.ulPegs sold separately.

Part Number: CA004
MSRP: CAN$148.83  Price: CAN$146.51

Hitch Tongue 3 Inch Drop wo Ball - Honda 1800 2012 - NewerHitch Tongue 3 Inch Drop wo Ball - Honda 1800 2012 - Newer
ulliTriple chrome plated Hitch Tongue 3 drop.ulNOTE: Will only work with GL18007-30 All Aluminum Trailer Hitch for 2012 Up Honda 1800s

Part Number: GL18007-33
MSRP: CAN$62.64  Price: CAN$61.89

Hitch Tongue 3 Inch Drop wo Ball - Honda GL180001 - 11Hitch Tongue 3 Inch Drop wo Ball - Honda GL180001 - 11
ulliHitch Tongue 3 drop for 2001-2011 HONDA GL1800. liChrome Steel Hitch Ball all sold separately.ulNOTE: Will only work with GL18007-20 All Aluminum Trailer Hitch.

Part Number: GL18007-23
MSRP: CAN$62.64  Price: CAN$61.89

Hitch Tongue 6 Inch Drop wo Ball - Honda GL1800 01 - 11Hitch Tongue 6 Inch Drop wo Ball - Honda GL1800 01 - 11
ulliHitch Tongue 6 drop for 2001-2011 HONDA GL1800. liChrome Steel Hitch Ball all sold separately.ulNOTE: Will only work with GL18007-20 All Aluminum Trailer Hitch.

Part Number: GL18007-26
MSRP: CAN$66.56  Price: CAN$65.81

Hitch Tongue 6 Inch Drop wo Ball - Honda GL1800 2012Hitch Tongue 6 Inch Drop wo Ball - Honda GL1800 2012
ulliTriple chrome plated Hitch Tongue 6 drop.ulNOTE: Will only work with GL18007-30 All Aluminum Trailer Hitch for 2012 Up Honda 1800s

Part Number: GL18007-36
MSRP: CAN$66.56  Price: CAN$65.81

Hitch Tounge 3in Drop without BallHitch Tounge 3in Drop without Ball
Hitch Tongue 3 drop. Comes standard with our GL18007 All Aluminum Trailer Hitch. Also see GL18007-0 0 Drop Tongue or GL18007-6 6 Drop Tongue and GL18007-B Aluminum Hitch Ball sold separately.

Part Number: GL18007-3
MSRP: CAN$62.64  Price: CAN$61.89

Hitch Tounge 6in Drop without BallHitch Tounge 6in Drop without Ball
Hitch Tongue 6 drop. Also see GL18007-0 0 Drop Tongue or GL18007-3 3 Drop Tongue and GL18007-B Aluminum Hitch Ball sold separately

Part Number: GL18007-6
MSRP: CAN$66.56  Price: CAN$65.81

Hitch Tounge No Drop without BallHitch Tounge No Drop without Ball
Hitch Tongue no drop. Also see GL18007-3 3 Drop Tongue or GL18007-6 6 Drop Tongue and GL18007-B Aluminum Hitch Ball sold separately

Part Number: GL18007-0
MSRP: CAN$54.81  Price: CAN$54.05

Inner Luggage for Most SaddlebagsInner Luggage for Most Saddlebags
This set of deluxe Cordura saddlebagtrunk inner luggage comes in a combination of 3 bags one for each of the saddlebags and one for the trunk. Durable construction with reinforced corners. GREAT TO HAVE WHEN AT THE SPUR OF THE MOMENT YOU DECIDE TO TAKE THAT ONCE IN A LIFETIME TRIP ON YOUR BIKE You can always be prepared.

Part Number: 30-8700-00
MSRP: CAN$62.64  Price: CAN$61.89

Kawasaki Vulcan ClassicNomad HornKawasaki Vulcan ClassicNomad Horn
BE SAFE BE HEARDVulcan 1500Nomad Air Horns These air horns give a loud warning blast of 128 decibels Uses the stock horn button. Can be easily installed in 20-30 minutes. The trumpets are triple plated chrome as well as all of the mounts and brackets so the shine and finish will last for years to come. They are completely waterproof. No hole drilling is required bolt-on plug-in installation. Cone shaped covers are included which mount to the front of the trumpets. One year unlimited warranty. All kits include two horns air compressor relay simple wiring and complete installation instructions. The air compressor creates instant air pressure to the horns. Since the pressure is created so fast there is no need for a storage tank as on Semi Trucks and RVs. Although the pressure is very low 12-15 psi it delivers a large volume of air 3 CFM or cubic feet per minute. This low-pressure high volume air supply causes the diaphragm inside the horn to vibrate at a high rate of speed or frequency the exact speed at which it vibrates is varied by the length of the horn or trumpet. Together the horn set produces an extremely loud 128-decibel warning blast. This is approximately 4 times louder than most electric motorcycle horns which usually rate at 87 decibels.

Part Number: AHVUL
MSRP: CAN$156.66  Price: CAN$153.56

Kickstand Pad - Kawasaki 1700 Vulcan VoyagerKickstand Pad - Kawasaki 1700 Vulcan Voyager
ulliThis clever pad slides over the stock kickstand foot and is secured with a setscrew. liIt has over two times the surface area of the original. liNo more worries about your motorcycle falling over or fumbling around looking for your kickstand plate. liBillet aluminum with a black anodized coating.ul

Part Number: VOY013
CAN$22.68

Large Lighted Quick Detach Cooler Rack 18in x 30inLarge Lighted Quick Detach Cooler Rack 18in x 30in
This lightweight aluminum luggage rack bolts to your trailer hitchs tongue. The rack measures 18 x 30 to accommodate most medium to large size coolers and duffel bags and has holes around the edge for bungee cords or nets. Comes standard with LED rear running lights brake lights signal lights and a lighted license plate holder. While it is strong enough to hold a 250lb person it is rated at a maximum of 35lbs capacity due to handling and cornering performance.

Part Number: GL18010
MSRP: CAN$235.01  Price: CAN$230.34

Large Round Pegs with Heel Rest pairLarge Round Pegs with Heel Rest pair
Our High-Quality Peg and Board Sets Fit With ANY Highway Mount. They may look a little like others...but take a closer look to see the big difference. All RIVCO Highway Mounts Pegs are supplied with stainless steel hardware.This set of pegs has an adjustable heel rest both are 5 long. The pegs and heel rests can be set to any desired angle and locked securely in place. They will fit with all RIVCO highway mounts. Not recommended for use as rider pegs. Includes clevis and mounting bolts not pictured.

Part Number: PEGSHR
MSRP: CAN$58.72  Price: CAN$57.97

License Plate Mount wLED LightsLicense Plate Mount wLED Lights
LED tail light and license plate mount is designed for use with either of our small quick detach racks HD008 for Harley Davidson or the GL18008 Honda. Its use is recommended any time the luggage used on the rack covers any portion of the motorcycles stock lighting or license plate. This is not only unsafe its illegal and leaves you likely to get pulled over by police. This license plate mount will provide additional tail brake and turn signal lights as well as a license plate light and mounting location. The LED lights are extremely bright even in direct sunlight and both water and vibration proof. It attaches easily to the rack and includes quick release license plate screws.You can custom wire the LED lights yourself or use our GL18007-IU Isolater Harness to wire them as if you were towing a trailer.

Part Number: CRLGHT
MSRP: CAN$101.82  Price: CAN$100.28

License Plate Mounted Double Flag Holder KitLicense Plate Mounted Double Flag Holder Kit
Made in the U.S.A. these high quality flag holder poles are made from stainless steel and then hand polished to a brilliant finish. This set wont ever rust or tarnish and will last a lifetime. Wont bend or flex easily mounts to all license plate holders while remaining sturdy at highway speeds. The two poles topped with chrome finials will accommodate all flags up to 10.5 tall and include clips to keep flags in place at the top of the poles. Note: 10.5 poles that will accomodate 10 flags. Flags not included.

Part Number: FH100
MSRP: CAN$39.14  Price: CAN$38.38

License Plate Relocation Kit - Triumph Rocket IIILicense Plate Relocation Kit - Triumph Rocket III
Replaces the stock licenseturn signal mounting bracket and installs easily without any drilling wire cutting etc. It brings the turn signals in 3 inch and hides the unattractive black stems. It also has two sets of holes to move the license plate up either 2 inch in full view or 3 inch as top line of plate hidden but numbers still in view. It is laser cut from heavy gauge steel and powder coated in gloss black.

Part Number: TR3105
MSRP: CAN$54.81  Price: CAN$54.05

LicenseTurn Signal Relocation Kit wSOMA - HD DynaLicenseTurn Signal Relocation Kit wSOMA - HD Dyna
Give your bike a custom look with the triple chrome plated licenseturn signal relocation kit that includes two of our red SOMA 15 LED light strips for added visibility. Includes 36 wires wire connectors and dual function tailbrake light electronic module. The laser cut heavy gauge steel license plate holder mounts at a 45 angle and relocates the turn signals to the rear while moving them 6 inward. Required hardware and easy to follow instructions included.

Part Number: FXD105
MSRP: CAN$70.48  Price: CAN$69.72

LicenseTurn Signal Relocator - Triumph AmericaLicenseTurn Signal Relocator - Triumph America
One of the easiest things you can do to customize and clean up the appearance of your license plate turn signals and tail light. Replaces the stock licenseturn signal mounting bracket installs easily without any drilling wire cutting etc. It lays the license plate down against the fender and brings the turn signals in 4. It is laser cut from heavy gauge steel and triple chrome plated. Also included is a set of our SOMA super bright wide angle LED tail and brake lights. The second most common motorcycle accident you are ever likely to face is being rear-ended and cruiser bikes are known for having small tail lights. While these LEDs are very small in size they give a huge increase in visibility to and safety from other motorists. For maximum visibility combine them with our flashing LED Brake Modulator.

Part Number: TA105
MSRP: CAN$109.65  Price: CAN$108.12

Logo T-Shirt GrayLogo T-Shirt Gray
RIVCO Taking Pride in Your Ride logo T-Shirts. 100 Cotton. Full color back shown here. Available in Youth through XXXL Sizes.

Part Number: TSHIRT
MSRP: CAN$12.5  Price: CAN$12.25

Magnum Electric Horn SetMagnum Electric Horn Set
While not quite as loud as our premium quality air horns with an output of 118 decibels these are the loudest electric horns you can buy. Over THREE times as loud as most stock horns and a great economical choice. A direct replacement for most 12-volt electric horns this set includes two chrome finish horns one high and one low tone mounting brackets and installation instructions. Note: While not included we recommend the use of a 30amp relay which you can purchase through RIVCO using RELAY as a SKU number to achieve maximum volume and protect the stock electrical system.

Part Number: ELCHRN
MSRP: CAN$62.64  Price: CAN$61.89

Model Solo Rack - VTX1300RVTX1800RModel Solo Rack - VTX1300RVTX1800R
Our new Quick Detach design allows you to go back forth between the solo rack and your passenger seat in seconds without tools. The rack is laser cut and triple chrome plated. It comes with all required stainless steel hardware detailed mounting instructions.

Part Number: VTX13010
MSRP: CAN$117.49  Price: CAN$115.17

Molded 6-Wire Trailer ConnectorMolded 6-Wire Trailer Connector
This Molded 6-Wire Trailer Connector is manufactured with a 60 loop of 16 gauge wire that can be cut as desired for splicing into or replacing existing wiring.Why a six wire connector All motorcycles and most trailers have separate tail brake and turn signal wires plus the ground. This requires a trailer wire connector with five wires. The sixth terminal or wire can be used for an interior light or other accessory and is usually wired to have power when the ignition is off.

Part Number: TWC002
MSRP: CAN$11.71  Price: CAN$11.48

Multi-Application Air Horn Pitch BlackMulti-Application Air Horn Pitch Black
Multiple Application Horn kit. Several mounting abilities and locations to fit most bikes namely Yamaha V-Stars Road Stars and any other bikes with FRAME MOUNTING ABILITY EXPOSED FRAME TUBES or ENGINE GUARDS. These air horns give a loud warning blast of 128 decibels Uses the stock horn button. Can be easily installed in 20-30 minutes.All air horn sets are bolt on and plug-in requiring about 30 minutes to install. They include the compressor dustbug covers all necessary hardware hoses wiring fuse relay and detailed instructions with pictures.The trumpets are satin black finished as are the mounts and brackets. They are completely waterproof. No drilling is required: bolt-on plug-in installation. Cone shaped covers are included which mount to the front of the trumpets. One year unlimited warranty.All kits include horn assembly air compressor relay simple wiring and complete installation instructions. These horns mount to the front right side engine guard with the compressor mounting to the frame behind the lowers.

Part Number: AHMULTIBK
MSRP: CAN$156.66  Price: CAN$153.56

Multi-Application Air Horns - Chrome - Honda Indian Kawasaki Suzuki Victory YamahaMulti-Application Air Horns - Chrome - Honda Indian Kawasaki Suzuki Victory Yamaha
Multiple Application Horn kit. Several mounting abilities and locations to fit most bikes namely Yamaha V-Stars Road Stars and any other bikes with frame mounting ability or engine guards. These horns give a loud warning blast of 125 decibels all chrome finish.

Part Number: AHMULTI
MSRP: CAN$156.66  Price: CAN$153.56

Oil Filter Wrench The WenchOil Filter Wrench The Wench
Tired of skinned knuckles and tools that dont fit Made for late models 90 and newer with little clearance between the crankcase or sensor and the filter this wrench allows you to easily get in that tight spot and rotate the filter without slipping. Small end has built-in drain plug wrench. Works on all stock Harley-Davidson oil filters. No Harley owner should be without the one that works

Part Number: HD021
CAN$15.63

Parade Flag holder Mounting Kit for Harley FLHFLT 08 and earlierParade Flag holder Mounting Kit for Harley FLHFLT 08 and earlier
This kit contains the chromed receiver brackets and all hardware required for mounting the RIVCO Products Parade Flag Holder PF1000 or Quick-Detach Rack QD1000 on Harley-Davidson FLH or FLT models. Kit attaches directly to the your motorcycles frame and includes complete photo-detailed instructions for easy installation.

Part Number: HWK015
MSRP: CAN$46.97  Price: CAN$46.22

Parade Flag holder Mounting Kit for Harley FLHFLT 09 and newerParade Flag holder Mounting Kit for Harley FLHFLT 09 and newer
This kit contains the chromed receiver brackets and all hardware required for mounting the RIVCO Products Parade Flag Holder PF1000 or Quick-Detach Rack QD1000 on 2009 and later Harley-Davidson FLH or FLT models. Includes complete photo-detailed instructions for easy installation.

Part Number: HWK020
MSRP: CAN$62.64  Price: CAN$61.89

Parade Flag Holder Socket Add-onParade Flag Holder Socket Add-on
Order additional flag holder sockets to display two andor three flags on holders PF900 and PF910 or up to five flags when used with optional PF930 add-on flag holder bar. Sold individually.

Part Number: PF920
MSRP: CAN$37.57  Price: CAN$36.82

Passenger Board Relocation Arms for Triumph AmericaPassenger Board Relocation Arms for Triumph America
Used to move the passenger boards forward and have three different height adjustments. The arms will increase passenger leg room and comfort when saddlebags are installed on this model and there is little or no room between the passenger peg and the saddlebag for the passengers heels. By moving the boards forward 4 you will gain needed heel room as well as allow the passenger to be in a much more relaxed and comfortable position.

Part Number: TA005-5
MSRP: CAN$62.64  Price: CAN$61.89

Passenger Board Relocation Arms pr - Honda VTX1300 VTX1800 and VT1100Passenger Board Relocation Arms pr - Honda VTX1300 VTX1800 and VT1100
Used to move the passenger boards forward 3 12 and further increase passenger leg room and comfort. When saddlebags are installed on this model there is little or no room between the passenger peg and the saddlebag for the passengers heels. By moving the boards forward 3 12 youll gain the needed heel room as well as allow the passenger to be in a more relaxed position.

Part Number: VTX005-5
MSRP: CAN$62.64  Price: CAN$61.89

Passenger Boards for Triumph AmericaSpeedmasterPassenger Boards for Triumph AmericaSpeedmaster
These boards are the ultimate in passenger comfort. They greatly increase foot and leg support as well as allow variation in foot position on long rides. Machined from billet aluminum hand polished to a flawless finish and triple chrome plated. The inlaid rubber pads are made of soft anti-vibration neoprene to further ensure passenger comfort. These floorboards also fold and lock in the up position with spring-loaded detents.

Part Number: TA005
MSRP: CAN$227.18  Price: CAN$223.29

Passenger Boards pr - Honda VTX1300 VTX1800 and VT1100Passenger Boards pr - Honda VTX1300 VTX1800 and VT1100
Great Touring Comfort Keep your passengers comfortable and happy with RIVCOs high quality triple chrome plated passenger floorboards. The boards themselves greatly increase passenger foot and leg support over the stock pegs. Floorboards are inlaid with anti-vibration neoprene pads.

Part Number: VTX005
MSRP: CAN$227.18  Price: CAN$223.29

Passenger Corbin Bags Relocators - Triumph Rocket III Standard and ClassicPassenger Corbin Bags Relocators - Triumph Rocket III Standard and Classic
With the Corbin bags and stock pegs there is little room for the passengers foot. This set of black powder coated steel brackets replace the original ones supplied with your Corbin bags to allow use with RIVCO Passenger Floorboards while giving maximum motoring comfort to your passenger.

Part Number: TR3005-6
MSRP: CAN$54.81  Price: CAN$54.05

Passenger Floorboard Caps Chrome- Honda GL1800 Valkyrie Rune ModelsPassenger Floorboard Caps Chrome- Honda GL1800 Valkyrie Rune Models
Chrome caps are available to cover the mount holes made for the passenger floorboards.

Part Number: NRX005-20
MSRP: CAN$19.59  Price: CAN$19.58

Passenger Floorboard Relocation Arm 5 inch - Can-Am Spyder RSRS-SPassenger Floorboard Relocation Arm 5 inch - Can-Am Spyder RSRS-S
For use with RIVCO CA005 or CA125 passenger floorboards. These custom billet relocation arms will move the passenger floorboards forward 5 and have three different height adjustments greatly increasing passenger leg room and comfort. The set is silver powder coated.

Part Number: CA005-5
MSRP: CAN$62.64  Price: CAN$61.89

Passenger Floorboard Relocation Arm 7 inch - Can-Am Spyder RSRS-SPassenger Floorboard Relocation Arm 7 inch - Can-Am Spyder RSRS-S
For use with RIVCO CA005 or CA125 passenger floorboards. These custom billet relocation arms will move the passenger floorboards forward 5 and have three different height adjustments greatly increasing passenger leg room and comfort. The set is silver powder coated.NOTE: 7 arms are recommended for use only when used with RIVCO CA020 driver floorboards.

Part Number: CA005-6
MSRP: CAN$62.64  Price: CAN$61.89

Passenger Floorboard Relocation Arms - Triumph Rocket III Standard and ClassicPassenger Floorboard Relocation Arms - Triumph Rocket III Standard and Classic
When saddlebags are installed on this motorbike there is little or no room between the passenger peg and the saddlebag for the passengers heels. By moving the boards forward 4 inch you will gain the needed heel room as well as allow the passenger to be in a more relaxed position. The arms have two sets of alignment holes and can be installed at the original height or 1.5 inch higher.

Part Number: TR3005-5
MSRP: CAN$62.64  Price: CAN$61.89

Passenger Floorboards - Can-Am Spyder RSRS-SPassenger Floorboards - Can-Am Spyder RSRS-S
These passenger floorboards feature triple chrome plated billet aluminum boards with anti-vibration rubber and the set folds up when not in use. NOTE: Also available - RIVCOs optional CA0005-5 5 or CA005-6 7 Relocation Arms for Can-Am Spyders.

Part Number: CA005
MSRP: CAN$227.18  Price: CAN$223.29

Passenger Floorboards - Honda ValkyriePassenger Floorboards - Honda Valkyrie
These floorboards are adjustable through a 6 range of motion. Adjust in seconds by pulling the spring loaded locking pins. They also can be adjusted from 1 below to 3 above the stock peg location. These boards greatly increase foot and leg support over the stock floorboards. The floorboard pads are made of anti-vibration neoprene ensuring passenger comfort. The boards are CNC machined from billet aluminum and triple chrome plated.

Part Number: VAL005A
MSRP: CAN$336.87  Price: CAN$330.63

Passenger Floorboards - Triumph Rocket III Standard and ClassicPassenger Floorboards - Triumph Rocket III Standard and Classic
Machined from billet aluminum and triple plated chrome finish. The inlaid rubber pads are made from soft anti-vibration neoprene rubber to further insure passenger motoring comfort. They will fold and lock in the up position with spring loaded detents when not in use.

Part Number: TR3005
MSRP: CAN$227.18  Price: CAN$223.29

Peg Adaptor Set Coarse Thread 12 x 13Peg Adaptor Set Coarse Thread 12 x 13
These threaded adapters will allow you to use other brands of pegs that use 12-13 mounting bolts with RIVCO highway mount sets that use 38 bolts.

Part Number: PEGSAC
MSRP: CAN$10.15  Price: CAN$9.94

Peg Adaptor Set Fine Coarse 12 x 20Peg Adaptor Set Fine Coarse 12 x 20
These threaded adapters will allow you to use other brands of pegs that use Harleys 12-20 mounting bolts with RIVCO Highway Mount sets which use 38 bolts.

Part Number: PEGSAF
MSRP: CAN$10.15  Price: CAN$9.94

Peg Adaptor Set for GL1800 Rune and all VTX C HondasPeg Adaptor Set for GL1800 Rune and all VTX C Hondas
Peg adapters allow you to replace your stock rider pegs with any RIVCO peg set for added comfort and good looks.

Part Number: PEGSHA
CAN$23.47

Plug-In Trailering Wire Harness for Harley-DavidsonsPlug-In Trailering Wire Harness for Harley-Davidsons
Simply unplug the tail light from the main wire harness under the seat plug in the mating male and female connectors supplied with 30 of wire in a loom. Add a mating trailer plug and youre done Has five wires separate tail turn and brake wires. A 4 wire trailer system will require a 5 to 4 wire signal adaptor available from RIVCO Products as EC09874.

Part Number: HD007-12
CAN$23.47

Polished Aluminum Handlebar Risers and Caps - Suzuki C50 05 and newerPolished Aluminum Handlebar Risers and Caps - Suzuki C50 05 and newer
CNC machined billet aluminum handlebar risers and caps bring the bars back 1 12 and up 34 significantly reducing rider back strain while allowing a much more relaxed cruiser style of riding. This set has a high luster polished finish to match the stock aluminum steering head and includes caps and all necessary hardware. Retains all of the stock cables hoses and wiring without any rerouting for simple installation.

Part Number: SC5017A
MSRP: CAN$143.34  Price: CAN$141.02

Power Pucks Speakers - Harley Davidson Baggers 00 - 11Power Pucks Speakers - Harley Davidson Baggers 00 - 11
ulliTransform your stock fairing speaker system easily and affordably. liThe Power Pucks speaker amp design will triple your radio amp output and you can enjoy three times more volume and clarity from your stock speakers with just a few simple connections. liCompletely hidden inside the fairing these lightweight amplifiers mount directly onto the speaker magnets without swapping any of the existing components. liDesigned and engineered to be a simple plug-and-play installation. liAlso features onboard gain and tone adjustments as well as auxiliary audio input enabling the connection of an iPod or mp3 player directly to the speaker amp without the use of a radio. liThis also works great with police bikes and standard Harleys that lack a radio head unit. Specifications:li45 watts RMS 95 watts PeakliTriples Radio Amp OutputliGain and Tone AdjustmentsliDistortion ProtectionliWorks with 2 Ohm or 4 Ohm Systemsli3.5mm Audio InputliMaterial: High Durability ABS PolycarbonateliDiameter: 3liHeight: 1.5ul

Part Number: CS149
MSRP: CAN$195.84  Price: CAN$191.95

PowerMaster Baffle Set 1.75in for 95-Up FLHT FLHR and FLTRPowerMaster Baffle Set 1.75in for 95-Up FLHT FLHR and FLTR
Made for RIVCOs PowerMaster Mufflers this 1.75 baffle and mat kit does NOT require the use of any EFI performance fuel module or any fuel system modification downloads or retuning. QUIETEST. With a choice of four different size baffles the PowerMaster range of products allows you to choose the performance and sound level you want. Our heavy gauge steel bafflesdesigned to be interchangeable are wrapped with sound and heat diffusing ceramic matting which is held in place with a breakthrough clamping method. Most baffle mats dislodge in the first 100 miles but not these. With this baffle gains of 2-4 horsepower can be expected and the baffles can easily be replaced by removing one screw.Available PowerMaster Muffler styles:HD600LT Slashcut Long on TopHD600LB Slashcut Long on BottomHD600S StraightcutNOTE: HD6M14 Replacement Mats sets available. Call for details.NOTE: Gains of an additional 2-3 horsepower will be seen with the use of a KN Free Flow air filter. Recommended for use with PowerMaster EFI Module no matter what size baffle is used.If for any reason you are not satisfied with the sound of your new PowerMaster Mufflers we will within 30 days from the date of purchase exchange the baffles for any other size you choose. Does not include shipping.

Part Number: HD6175
MSRP: CAN$46.97  Price: CAN$46.22

PowerMaster Baffle Set 2.25in for 95-Up FLHT FLHR and FLTRPowerMaster Baffle Set 2.25in for 95-Up FLHT FLHR and FLTR
Made for RIVCOs PowerMaster Mufflers this 2.25 baffle and mat kit does NOT require the use of any EFI performance fuel module or any fuel system modification downloads or retuning. QUIETEST. With a choice of four different size baffles the PowerMaster range of products allows you to choose the performance and sound level you want. Our heavy gauge steel bafflesdesigned to be interchangeable are wrapped with sound and heat diffusing ceramic matting which is held in place with a breakthrough clamping method. Most baffle mats dislodge in the first 100 miles but not these. With this baffle gains of 2-4 horsepower can be expected and the baffles can easily be replaced by removing one screw.Available PowerMaster Muffler styles:HD600LT Slashcut Long on TopHD600LB Slashcut Long on BottomHD600S StraightcutNOTE: HD6M14 Replacement Mats sets available. Call for details.NOTE: Gains of an additional 2-3 horsepower will be seen with the use of a KN Free Flow air filter. Recommended for use with PowerMaster EFI Module no matter what size baffle is used.If for any reason you are not satisfied with the sound of your new PowerMaster Mufflers we will within 30 days from the date of purchase exchange the baffles for any other size you choose. Does not include shipping.

Part Number: HD6225
MSRP: CAN$46.97  Price: CAN$46.22

PowerMaster Baffle Set 2.50in for 95-Up FLHT FLHR and FLTRPowerMaster Baffle Set 2.50in for 95-Up FLHT FLHR and FLTR
Made for RIVCOs PowerMaster Mufflers this 2.50 baffle and mat kit does NOT require the use of any EFI performance fuel module or any fuel system modification downloads or retuning. QUIETEST. With a choice of four different size baffles the PowerMaster range of products allows you to choose the performance and sound level you want. Our heavy gauge steel bafflesdesigned to be interchangeable are wrapped with sound and heat diffusing ceramic matting which is held in place with a breakthrough clamping method. Most baffle mats dislodge in the first 100 miles but not these. With this baffle gains of 2-4 horsepower can be expected and the baffles can easily be replaced by removing one screw.Available PowerMaster Muffler styles:HD600LT Slashcut Long on TopHD600LB Slashcut Long on BottomHD600S StraightcutNOTE: HD6M14 Replacement Mats sets available. Call for details.NOTE: Gains of an additional 2-3 horsepower will be seen with the use of a KN Free Flow air filter. Recommended for use with PowerMaster EFI Module no matter what size baffle is used.If for any reason you are not satisfied with the sound of your new PowerMaster Mufflers we will within 30 days from the date of purchase exchange the baffles for any other size you choose. Does not include shipping.

Part Number: HD6250
MSRP: CAN$46.97  Price: CAN$46.22

PowerMaster Baffle Set 2in for 95-Up FLHT FLHR and FLTRPowerMaster Baffle Set 2in for 95-Up FLHT FLHR and FLTR
Made for RIVCOs PowerMaster Mufflers this 2 baffle and mat kit does NOT require the use of any EFI performance fuel module or any fuel system modification downloads or retuning. QUIETEST. With a choice of four different size baffles the PowerMaster range of products allows you to choose the performance and sound level you want. Our heavy gauge steel bafflesdesigned to be interchangeable are wrapped with sound and heat diffusing ceramic matting which is held in place with a breakthrough clamping method. Most baffle mats dislodge in the first 100 miles but not these. With this baffle gains of 2-4 horsepower can be expected and the baffles can easily be replaced by removing one screw.Available PowerMaster Muffler styles:HD600LT Slashcut Long on TopHD600LB Slashcut Long on BottomHD600S StraightcutNOTE: HD6M14 Replacement Mats sets available. Call for details.NOTE: Gains of an additional 2-3 horsepower will be seen with the use of a KN Free Flow air filter. Recommended for use with PowerMaster EFI Module no matter what size baffle is used.If for any reason you are not satisfied with the sound of your new PowerMaster Mufflers we will within 30 days from the date of purchase exchange the baffles for any other size you choose. Does not include shipping.

Part Number: HD6200
MSRP: CAN$46.97  Price: CAN$46.22

PowerMaster EFI Performance Module - FL Models 2010 and newerPowerMaster EFI Performance Module - FL Models 2010 and newer
The total answer to EFI tuning. Many Harley owners would like to install an aftermarket set of mufflers and a free flow air cleaner to get the sound they want and an extra ten horsepower that the bikes could use. Misleading information about what needs to be done to the EFI electronic fuel injection system is what scares most people away from installing aftermarket mufflers and or an air cleaner and its a fact that stock engines air flows are restricted and not getting enough fuel running lean in order to meet EPA noise and emissions regulations. Now even stock bikes will see gains in horsepower run cooler and smoother with this module installed. It features easy plug-and-play installation with simple push button adjustments comes preset for most applications and can be adjusted further by you in seconds. No danger of making a mistake and if you are not happy with the changes simply return to the previous settings. No need to go back to the shop for another expensive download or having to connect to a laptop computer like some other units. With the RIVCO PowerMaster EFI Module you can have complete control and the confidence to dial in the EFI like a pro - so order one today and get the sound and power you want from your Harley.NOTE: Fits all 2010 and 2011 Harley FL Models.NOTE: Use of a PowerMaster EFI Performance Module or some other means of supplying additional fuel is required for use with RIVCO PowerMaster Mufflers Slashcut Long Top - HD600LT Slashcut Long Bottom - HD600LB and Straightcut - HD600S when used with RIVCO 2.25 baffles HD6225 or 2.50 baffles HD6250.

Part Number: PP10
MSRP: CAN$211.51  Price: CAN$207.62

PowerMaster EFI Performance Module 2006PowerMaster EFI Performance Module 2006
The total answer to electronic fuel injection tuning. Many Harley owners would like to install an aftermarket set of mufflers and a free flow air cleaner to get the sound they want and an extra ten horsepower that the bikes could use. Misleading information about what needs to be done to the EFI system is what scares most people away from installing aftermarket mufflers andor an air cleaner and its a fact that the stock engines air flow is restricted and not getting enough fuel running lean in order to meet EPA noise and emissions regulations.Now even stock bikes will see gains in horsepower run cooler and run smoother with this module installed. It features easy plug-and-play installation with simple push button adjustments. Comes preset for most applications and can be adjusted further by you in seconds. No danger of making a mistake and if you are not happy with the changes simply return to the previous setting. No need to go back to the shop for another expensive download or connect to a laptop computer like some other units. With the RIVCO PowerMaster EFI Performance Module you can have complete control and the confidence to dial in the EFI like a pro. This model PP06 fits all 2006 models except V Rod and Dyna so order one today and get the sound and power you want from your HarleyNOTE: Use of a PowerMaster EFI Performance Module or some other means of supplying additional fuel is required for use with RIVCO PowerMaster Mufflers Slashcut Long Top - HD600LT Slashcut Long Bottom - HD600LB and Straightcut - HD600S when used with the 2.25 baffles HD6225 or 2.50 baffles HD6250.

Part Number: PP06
MSRP: CAN$211.51  Price: CAN$207.62

PowerMaster EFI Performance Module 2007PowerMaster EFI Performance Module 2007
The total answer to electronic fuel injection tuning. Many Harley owners would like to install an aftermarket set of mufflers and a free flow air cleaner to get the sound they want and an extra ten horsepower that the bikes could use. Misleading information about what needs to be done to the EFI system is what scares most people away from installing aftermarket mufflers andor an air cleaner and its a fact that the stock engines air flow is restricted and not getting enough fuel running lean in order to meet EPA noise and emissions regulations.Now even stock bikes will see gains in horsepower run cooler and run smoother with this module installed. It features easy plug-and-play installation with simple push button adjustments. Comes preset for most applications and can be adjusted further by you in seconds. No danger of making a mistake and if you are not happy with the changes simply return to the previous setting. No need to go back to the shop for another expensive download or connect to a laptop computer like some other units. With the RIVCO PowerMaster EFI Performance Module you can have complete control and the confidence to dial in the EFI like a pro. This model PP06 fits all 2006 models except V Rod and Dyna so order one today and get the sound and power you want from your HarleyNOTE: Use of a PowerMaster EFI Performance Module or some other means of supplying additional fuel is required for use with RIVCO PowerMaster Mufflers Slashcut Long Top - HD600LT Slashcut Long Bottom - HD600LB and Straightcut - HD600S when used with the 2.25 baffles HD6225 or 2.50 baffles HD6250.

Part Number: PP07
MSRP: CAN$211.51  Price: CAN$207.62

PowerMaster EFI Performance Module 2008-UpPowerMaster EFI Performance Module 2008-Up
The total answer to electronic fuel injection tuning. Many Harley owners would like to install an aftermarket set of mufflers and a free flow air cleaner to get the sound they want and an extra ten horsepower that the bikes could use. Misleading information about what needs to be done to the EFI system is what scares most people away from installing aftermarket mufflers andor an air cleaner and its a fact that the stock engines air flow is restricted and not getting enough fuel running lean in order to meet EPA noise and emissions regulations.Now even stock bikes will see gains in horsepower run cooler and run smoother with this module installed. It features easy plug-and-play installation with simple push button adjustments. Comes preset for most applications and can be adjusted further by you in seconds. No danger of making a mistake and if you are not happy with the changes simply return to the previous setting. No need to go back to the shop for another expensive download or connect to a laptop computer like some other units. With the RIVCO PowerMaster EFI Performance Module you can have complete control and the confidence to dial in the EFI like a pro. This model PP06 fits all 2006 models except V Rod and Dyna so order one today and get the sound and power you want from your HarleyNOTE: Use of a PowerMaster EFI Performance Module or some other means of supplying additional fuel is required for use with RIVCO PowerMaster Mufflers Slashcut Long Top - HD600LT Slashcut Long Bottom - HD600LB and Straightcut - HD600S when used with the 2.25 baffles HD6225 or 2.50 baffles HD6250.

Part Number: PP08
MSRP: CAN$211.51  Price: CAN$207.62

PowerMaster EFI Performance Module 95-06PowerMaster EFI Performance Module 95-06
The total answer to electronic fuel injection tuning. Many Harley owners would like to install an aftermarket set of mufflers and a free flow air cleaner to get the sound they want and an extra ten horsepower that the bikes could use. Misleading information about what needs to be done to the EFI system is what scares most people away from installing aftermarket mufflers andor an air cleaner and its a fact that the stock engines air flow is restricted and not getting enough fuel running lean in order to meet EPA noise and emissions regulations.Now even stock bikes will see gains in horsepower run cooler and run smoother with this module installed. It features easy plug-and-play installation with simple push button adjustments. Comes preset for most applications and can be adjusted further by you in seconds. No danger of making a mistake and if you are not happy with the changes simply return to the previous setting. No need to go back to the shop for another expensive download or connect to a laptop computer like some other units. With the RIVCO PowerMaster EFI Performance Module you can have complete control and the confidence to dial in the EFI like a pro. This model fits all 1995-2006 models except V-Rod. So order one today and get the sound and power you want from your HarleyNOTE: Use of a PowerMaster EFI Performance Module or some other means of supplying additional fuel is required for use with RIVCO PowerMaster Mufflers Slashcut Long Top - HD600LT Slashcut Long Bottom - HD600LB and Straightcut - HD600S when used with RIVCO 2.25 baffles HD6225 or 2.50 baffles HD6250.

Part Number: PP95
MSRP: CAN$211.51  Price: CAN$207.62

PowerMaster Muffler Mount Kit - Yamaha Royal Star VenturePowerMaster Muffler Mount Kit - Yamaha Royal Star Venture
Kit allows the use of RIVCO mufflers on 2000 and newer Royal star Ventures. Features steel mounting arms which fit our PowerMasterTM mufflers for Harleys offers a choice of 4 different baffle sizes as well as dynamic sound power our no - bluing guarantee. 4 bracket arms are black powder coated. Get your Venture that rumblin sound NOTE: For addiional performance and guarantee information see RIVCO Products HD600 PowerMasterTM mufflers for Harleys and HD6175 and HD6200 baffle sets.

Part Number: RSV600
CAN$35.22

PowerMaster Mufflers - FLHT FLHR and FLTR 95 and newerPowerMaster Mufflers - FLHT FLHR and FLTR 95 and newer
With premium sound and performance for Harley Davidsons RIVCO PowerMaster mufflers are the result of comprehensive design dyno-testing and real world road tests delivered with the best sound performance and guarantees available anywhere.Choose from one of four different size baffles for variable sound and power and the baffles can be easily replaced by removing one screw.HD6175 Pair 1.75 baffles and mat kit. Quietest Does not require the use of an EFI performance fuel module or any fuel system modifications. Gains of 2-4 horsepower can be expected.HD6200 Pair 2.00 baffles and mat kit recommended for best sound and power without needing any fuel system modifications downloads or re-tuning. Gains of 4-5 horsepower can be expected.HD6225 Pair 2.25 baffles and mat kit. Louder requires the use of PowerMaster EFI Performance Module or re-jetting. Gains of 6-8 horsepower can be expected.HD6250 Pair 2.50 and mat kit. Loudest requires the use of PowerMaster EFI Performance Module or re-jetting. Gains of 6-8 horsepower can be expected.

Part Number: HD600
MSRP: CAN$258.52  Price: CAN$253.85

PowerMaster Mufflers - Slash Cut Long on Bottom 1.75 In. Baffle - H-D FLHT FLHR FLTR 95 - NewerPowerMaster Mufflers - Slash Cut Long on Bottom 1.75 In. Baffle - H-D FLHT FLHR FLTR 95 - Newer
With premium sound and performance for Harley Davidsons RIVCOs PowerMaster mufflers are the result of comprehensive design dyno-testing and real world road tests delivering the best sound performance and guarantees available anywhere. For 95 and later FLHT all Electra Glide models FLHR all Road King models and FLTR All Road Glide modelsWith a choice of four different size baffles the PowerMaster allows you to choose the performance and sound level you want. Our heavy gauge steel baffles are wrapped with sound and heat diffusing ceramic matting which is held in place with a exclusive retaining system. Most baffle mats dislodge in the first 100 miles but not these. Combining those innovations with a proprietary high temperature inner coating and 4 step chroming process allows us to offer not only a one year limited warranty against manufacturers defects in chrome plating but also an amazing limited lifetime warranty against blueing.These mufflers deliver 5 additional horsepower from the moment you slip them on and require no fuel injection modifications like re-jetting carbs race tuning additional EFI modules re-mapping or dealer-downloads when used with the 1.75 or 2.00 baffles.1.75 baffles and mat kit. Quietest Does not require the use of an EFI performance fuel module or any fuel system modifications. Gains of 2-4 horsepower can be expected.

Part Number: HD600LB175
MSRP: CAN$274.19  Price: CAN$268.73

PowerMaster Mufflers - Slash Cut Long on Bottom 2 In. Baffle - H-D FLHT FLHR FLTR 95 - NewerPowerMaster Mufflers - Slash Cut Long on Bottom 2 In. Baffle - H-D FLHT FLHR FLTR 95 - Newer
With premium sound and performance for Harley Davidsons RIVCOs PowerMaster mufflers are the result of comprehensive design dyno-testing and real world road tests delivering the best sound performance and guarantees available anywhere. For 95 and later FLHT all Electra Glide models FLHR all Road King models and FLTR All Road Glide modelsWith a choice of four different size baffles the PowerMaster allows you to choose the performance and sound level you want. Our heavy gauge steel baffles are wrapped with sound and heat diffusing ceramic matting which is held in place with a exclusive retaining system. Most baffle mats dislodge in the first 100 miles but not these. Combining those innovations with a proprietary high temperature inner coating and 4 step chroming process allows us to offer not only a one year limited warranty against manufacturers defects in chrome plating but also an amazing limited lifetime warranty against blueing.These mufflers deliver 5 additional horsepower from the moment you slip them on and require no fuel injection modifications like re-jetting carbs race tuning additional EFI modules re-mapping or dealer-downloads when used with the 1.75 or 2.00 baffles.2.00 baffles and mat kit recommended for best sound and power without needing any fuel system modifications downloads or re-tuning. Gains of 4-5 horsepower can be expected.

Part Number: HD600LB2
MSRP: CAN$274.19  Price: CAN$268.73

PowerMaster Mufflers - Slash Cut Long on Bottom 2.25 In. Baffle - H-D FLHT FLHR FLTR 95 - NewerPowerMaster Mufflers - Slash Cut Long on Bottom 2.25 In. Baffle - H-D FLHT FLHR FLTR 95 - Newer
With premium sound and performance for Harley Davidsons RIVCOs PowerMaster mufflers are the result of comprehensive design dyno-testing and real world road tests delivering the best sound performance and guarantees available anywhere. For 95 and later FLHT all Electra Glide models FLHR all Road King models and FLTR All Road Glide modelsWhen using the 2.25 or 2.50 baffles additional fuel must be supplied to engine. NOTE: Without the use of a EFI module the engine will run hot or lean and voids the No Blueing warranty. The best solution is the addition of a PowerMaster EFI module which are easy to install and adjust.2.25 baffles and mat kit. Louder requires the use of PowerMaster EFI Performance Module or re-jetting. Gains of 6-8 horsepower can be expected.

Part Number: HD600LB225
MSRP: CAN$274.19  Price: CAN$268.73

PowerMaster Mufflers - Slash Cut Long on Bottom 2.5 In. Baffle - H-D FLHT FLHR FLTR 95 - NewerPowerMaster Mufflers - Slash Cut Long on Bottom 2.5 In. Baffle - H-D FLHT FLHR FLTR 95 - Newer
With premium sound and performance for Harley Davidsons RIVCOs PowerMaster mufflers are the result of comprehensive design dyno-testing and real world road tests delivering the best sound performance and guarantees available anywhere. For 95 and later FLHT all Electra Glide models FLHR all Road King models and FLTR All Road Glide modelsWhen using the 2.25 or 2.50 baffles additional fuel must be supplied to engine. NOTE: Without the use of a EFI module the engine will run hot or lean and voids the No Blueing warranty. The best solution is the addition of a PowerMaster EFI module which are easy to install and adjust.2.50 and mat kit. Loudest requires the use of PowerMaster EFI Performance Module or re-jetting. Gains of 8-10 horsepower can be expected.

Part Number: HD600LB250
MSRP: CAN$274.19  Price: CAN$268.73

PowerMaster Mufflers - Slash Cut Long on Top 1.75 In. Baffle - H-D FLHT FLHR FLTR 95 - NewerPowerMaster Mufflers - Slash Cut Long on Top 1.75 In. Baffle - H-D FLHT FLHR FLTR 95 - Newer
With premium sound and performance for Harley Davidsons RIVCOs PowerMaster mufflers are the result of comprehensive design dyno-testing and real world road tests delivering the best sound performance and guarantees available anywhere. For 95 and later FLHT all Electra Glide models FLHR all Road King models and FLTR All Road Glide modelsWith a choice of four different size baffles the PowerMaster allows you to choose the performance and sound level you want. Our heavy gauge steel baffles are wrapped with sound and heat diffusing ceramic matting which is held in place with a exclusive retaining system. Most baffle mats dislodge in the first 100 miles but not these. Combining those innovations with a proprietary high temperature inner coating and 4 step chroming process allows us to offer not only a one year limited warranty against manufacturers defects in chrome plating but also an amazing limited lifetime warranty against blueing.These mufflers deliver 5 additional horsepower from the moment you slip them on and require no fuel injection modifications like re-jetting carbs race tuning additional EFI modules re-mapping or dealer-downloads when used with the 1.75 or 2.00 baffles.1.75 baffles and mat kit. Quietest Does not require the use of an EFI performance fuel module or any fuel system modifications. Gains of 2-4 horsepower can be expected.

Part Number: HD600LT175
MSRP: CAN$274.19  Price: CAN$268.73

PowerMaster Mufflers - Slash Cut Long on Top 2 In. Baffle - H-D FLHT FLHR FLTR 95 - NewerPowerMaster Mufflers - Slash Cut Long on Top 2 In. Baffle - H-D FLHT FLHR FLTR 95 - Newer
With premium sound and performance for Harley Davidsons RIVCOs PowerMaster mufflers are the result of comprehensive design dyno-testing and real world road tests delivering the best sound performance and guarantees available anywhere. For 95 and later FLHT all Electra Glide models FLHR all Road King models and FLTR All Road Glide modelsWith a choice of four different size baffles the PowerMaster allows you to choose the performance and sound level you want. Our heavy gauge steel baffles are wrapped with sound and heat diffusing ceramic matting which is held in place with a exclusive retaining system. Most baffle mats dislodge in the first 100 miles but not these. Combining those innovations with a proprietary high temperature inner coating and 4 step chroming process allows us to offer not only a one year limited warranty against manufacturers defects in chrome plating but also an amazing limited lifetime warranty against blueing.These mufflers deliver 5 additional horsepower from the moment you slip them on and require no fuel injection modifications like re-jetting carbs race tuning additional EFI modules re-mapping or dealer-downloads when used with the 1.75 or 2.00 baffles.2.00 baffles and mat kit recommended for best sound and power without needing any fuel system modifications downloads or re-tuning. Gains of 4-5 horsepower can be expected.

Part Number: HD600LT2
MSRP: CAN$274.19  Price: CAN$268.73

PowerMaster Mufflers - Slash Cut Long on Top 2.25 In. Baffle - H-D FLHT FLHR FLTR 95 - NewerPowerMaster Mufflers - Slash Cut Long on Top 2.25 In. Baffle - H-D FLHT FLHR FLTR 95 - Newer
With premium sound and performance for Harley Davidsons RIVCOs PowerMaster mufflers are the result of comprehensive design dyno-testing and real world road tests delivering the best sound performance and guarantees available anywhere. For 95 and later FLHT all Electra Glide models FLHR all Road King models and FLTR All Road Glide modelsWhen using the 2.25 or 2.50 baffles additional fuel must be supplied to engine. NOTE: Without the use of a EFI module the engine will run hot or lean and voids the No Blueing warranty. The best solution is the addition of a PowerMaster EFI module which are easy to install and adjust.2.25 baffles and mat kit. Louder requires the use of PowerMaster EFI Performance Module or re-jetting. Gains of 6-8 horsepower can be expected.

Part Number: HD600LT225
MSRP: CAN$274.19  Price: CAN$268.73

PowerMaster Mufflers - Slash Cut Long on Top 2.5 In. Baffle - H-D FLHT FLHR FLTR 95 - NewerPowerMaster Mufflers - Slash Cut Long on Top 2.5 In. Baffle - H-D FLHT FLHR FLTR 95 - Newer
With premium sound and performance for Harley Davidsons RIVCOs PowerMaster mufflers are the result of comprehensive design dyno-testing and real world road tests delivering the best sound performance and guarantees available anywhere. For 95 and later FLHT all Electra Glide models FLHR all Road King models and FLTR All Road Glide modelsWhen using the 2.25 or 2.50 baffles additional fuel must be supplied to engine. NOTE: Without the use of a EFI module the engine will run hot or lean and voids the No Blueing warranty. The best solution is the addition of a PowerMaster EFI module which are easy to install and adjust.2.50 and mat kit. Loudest requires the use of PowerMaster EFI Performance Module or re-jetting. Gains of 8-10 horsepower can be expected.

Part Number: HD600LT250
MSRP: CAN$274.19  Price: CAN$268.73

PowerMaster Mufflers - Straight Cut 1.75 In. Baffle - H-D FLHT FLHR FLTR 95 - NewerPowerMaster Mufflers - Straight Cut 1.75 In. Baffle - H-D FLHT FLHR FLTR 95 - Newer
With premium sound and performance for Harley Davidsons RIVCOs PowerMaster mufflers are the result of comprehensive design dyno-testing and real world road tests delivering the best sound performance and guarantees available anywhere. For 95 and later FLHT all Electra Glide models FLHR all Road King models and FLTR All Road Glide modelsWith a choice of four different size baffles the PowerMaster allows you to choose the performance and sound level you want. Our heavy gauge steel baffles are wrapped with sound and heat diffusing ceramic matting which is held in place with a exclusive retaining system. Most baffle mats dislodge in the first 100 miles but not these. Combining those innovations with a proprietary high temperature inner coating and 4 step chroming process allows us to offer not only a one year limited warranty against manufacturers defects in chrome plating but also an amazing limited lifetime warranty against blueing.These mufflers deliver 5 additional horsepower from the moment you slip them on and require no fuel injection modifications like re-jetting carbs race tuning additional EFI modules re-mapping or dealer-downloads when used with the 1.75 or 2.00 baffles.1.75 baffles and mat kit. Quietest Does not require the use of an EFI performance fuel module or any fuel system modifications. Gains of 2-4 horsepower can be expected.

Part Number: HD600S175
MSRP: CAN$274.19  Price: CAN$268.73

PowerMaster Mufflers - Straight Cut 2 In. Baffle - H-D FLHT FLHR FLTR 95 - NewerPowerMaster Mufflers - Straight Cut 2 In. Baffle - H-D FLHT FLHR FLTR 95 - Newer
With premium sound and performance for Harley Davidsons RIVCOs PowerMaster mufflers are the result of comprehensive design dyno-testing and real world road tests delivering the best sound performance and guarantees available anywhere. For 95 and later FLHT all Electra Glide models FLHR all Road King models and FLTR All Road Glide modelsWith a choice of four different size baffles the PowerMaster allows you to choose the performance and sound level you want. Our heavy gauge steel baffles are wrapped with sound and heat diffusing ceramic matting which is held in place with a exclusive retaining system. Most baffle mats dislodge in the first 100 miles but not these. Combining those innovations with a proprietary high temperature inner coating and 4 step chroming process allows us to offer not only a one year limited warranty against manufacturers defects in chrome plating but also an amazing limited lifetime warranty against blueing.These mufflers deliver 5 additional horsepower from the moment you slip them on and require no fuel injection modifications like re-jetting carbs race tuning additional EFI modules re-mapping or dealer-downloads when used with the 1.75 or 2.00 baffles.2.00 baffles and mat kit recommended for best sound and power without needing any fuel system modifications downloads or re-tuning. Gains of 4-5 horsepower can be expected.

Part Number: HD600S2
MSRP: CAN$274.19  Price: CAN$268.73

PowerMaster Mufflers - Straight Cut 2.25 In. Baffle - H-D FLHT FLHR FLTR 95 - NewerPowerMaster Mufflers - Straight Cut 2.25 In. Baffle - H-D FLHT FLHR FLTR 95 - Newer
With premium sound and performance for Harley Davidsons RIVCOs PowerMaster mufflers are the result of comprehensive design dyno-testing and real world road tests delivering the best sound performance and guarantees available anywhere. For 95 and later FLHT all Electra Glide models FLHR all Road King models and FLTR All Road Glide modelsWhen using the 2.25 or 2.50 baffles additional fuel must be supplied to engine. NOTE: Without the use of a EFI module the engine will run hot or lean and voids the No Blueing warranty. The best solution is the addition of a PowerMaster EFI module which are easy to install and adjust.2.25 baffles and mat kit. Louder requires the use of PowerMaster EFI Performance Module or re-jetting. Gains of 6-8 horsepower can be expected.

Part Number: HD600S225
MSRP: CAN$274.19  Price: CAN$268.73

PowerMaster Mufflers - Straight Cut 2.5 In. Baffle - H-D FLHT FLHR FLTR 95 - NewerPowerMaster Mufflers - Straight Cut 2.5 In. Baffle - H-D FLHT FLHR FLTR 95 - Newer
With premium sound and performance for Harley Davidsons RIVCOs PowerMaster mufflers are the result of comprehensive design dyno-testing and real world road tests delivering the best sound performance and guarantees available anywhere. For 95 and later FLHT all Electra Glide models FLHR all Road King models and FLTR All Road Glide modelsWhen using the 2.25 or 2.50 baffles additional fuel must be supplied to engine. NOTE: Without the use of a EFI module the engine will run hot or lean and voids the No Blueing warranty. The best solution is the addition of a PowerMaster EFI module which are easy to install and adjust.2.50 and mat kit. Loudest requires the use of PowerMaster EFI Performance Module or re-jetting. Gains of 8-10 horsepower can be expected.

Part Number: HD600S250
MSRP: CAN$274.19  Price: CAN$268.73

Premium Billet Aluminum Highway BoardsPremium Billet Aluminum Highway Boards
Note: Will only work with Rivco Highway Mount Clamp and Arm Sets. Other brands may require additional hardware.To date our economy highway boards have been a good cost-effective choice but customers have been asking for a high-quality billet set that matches their Rivco driver boards passenger boards and brake pedal covers. While we were at the drawing board we thought of a few ways to improve on what was done in the past. To make them as comfortable as possible and ergonomically correct fit how your legs naturally rest we angled the heels inward toward the center of the motorcycle at 10 and built in an adjustment screw so you can set them to be angled up where they hinge or fold to your liking. Also there is a small built-in heel rest to prevent your foot from sliding down. They can be folded up when not in use and stay in place with spring-loaded detents. They come with 38 mounting bolts and will work with all Rivco and most other brands of mounts. As with all of our boards these are CNC machined from aircraft grade aluminum polished to a flawless finish triple chrome plated and inlaid with soft anti-vibration neoprene rubber.

Part Number: HBPB
MSRP: CAN$148.83  Price: CAN$146.51

Premium Billet Aluminum Passenger Floorboards - Triumph ThunderbirdPremium Billet Aluminum Passenger Floorboards - Triumph Thunderbird
ulliReplace your existing foot pegs with our 8 x 5 Premium Billet Aluminum floorboards and get great touring comfort liYou will find the soft neoprene rubber inlays greatly reduce vibration and reduce fatigue on long trips and you will discover that their size shape and angles increase comfort while giving your bike that highly-customized look. liThis set is triple chrome-plated and comes with all required hardware.ul

Part Number: TB005
MSRP: CAN$227.18  Price: CAN$223.29

Premium Billet Driver Boards - Honda VTX1800C and VTX1300CPremium Billet Driver Boards - Honda VTX1800C and VTX1300C
They bolt on in place of the stock driver pegs and measure 8 x 5 providing full support for your feet and room to move around during longer rides. This Premium Billet aluminum boards are triple chrome plated with soft anti-vibration neoprene rubber pads. The floorboards are hinged on their mounts and fold up in the event of a tip over. The set retains the stock shift and brake pedals while keeping adequate room above below.

Part Number: VTX024
MSRP: CAN$227.18  Price: CAN$223.29

Premium Billet Passenger Floorboards - Yamaha Road StarPremium Billet Passenger Floorboards - Yamaha Road Star
Great touring comfort Keep your passengers comfortable and happy- Replace your existing foot pegs with our 8 x 5 Premium Billet aluminum floorboards. Plus the mounts move the boards 2 farther forward 2 lower than the stock peg You will find the soft neoprene rubber inlays greatly reduce vibration and reduce fatigue on long trips. The set is triple chrome plated and comes with all required hardware. Note: Image shown with XV17005-5 relocation arms no longer available

Part Number: XV17005
MSRP: CAN$227.18  Price: CAN$223.29

Premium Weatherproof 6-Wire Connector SetPremium Weatherproof 6-Wire Connector Set
This weatherproof trailer connector set is marine quality and fully sealed to keep out water dirt and prevent corrosion. No splicing soldering or crude bulky connectors. Simply slip the seals over the wires strip and crimp on the snap action locking terminals push the terminals and seals into the housing and snap the seal retainer cap closed. Also included is an additional male plug with seals to use as a weatherproof dust cover on the motorcycle side female connector when not towing your trailer. Set includes 1 female 2 male housings all crimp connectors and wire seals plugs for unused wire sockets spare terminals and detailed instructions.

Part Number: TWC001
MSRP: CAN$14.85  Price: CAN$14.55

Quick Detach Lowers Hardware Kits - 04-Eariler HD ModelsQuick Detach Lowers Hardware Kits - 04-Eariler HD Models
Have you ever had the need to remove your lowers but didnt have the correct tools not to mention the time We can eliminate that Our QUICK DETACH LOWERS KIT installs in minutes and then allows you to remove or re-install your lowers in 2 to 3 minutes NO TOOLS REQUIRED Replaces stock mounting hardware with our unique quick detach stainless steel clamping devices which stay with the lowers when removed: leaving your bike looking clean. The kit is compatible with or without glove boxes. Now you can have your lowers on or off in a matter of minutes for those cold mornings or hot days.

Part Number: HD019
MSRP: CAN$70.48  Price: CAN$69.72

Quick Detach Lowers Hardware Kits - 05-Up HD ModelsQuick Detach Lowers Hardware Kits - 05-Up HD Models
Have you ever had the need to remove your lowers but did not have the correct tools not to mention the time We can eliminate that Our QUICK DETACH LOWERS KIT installs in minutes and then allows you to remove or re-install your lowers in 2 to 3 minutes NO TOOLS REQUIRED Replaces stock mounting hardware with our unique quick detach stainless steel clamping devices which stay with the lowers when removed: leaving your bike looking clean. The kit is compatible with or without glove boxes. Now you can have your lowers on or off in a matter of minutes for those cold mornings or hot days.

Part Number: HD019-05
MSRP: CAN$70.48  Price: CAN$69.72

Quick Detach Parade Flag HolderQuick Detach Parade Flag Holder
This flag holder bar can be installed or detached from the RIVCO receiver bracket in seconds. Included is the chromed bar chrome plugs and one flag holder socket. One or two more sockets can be added sold separately RIV-PF920 to accommodate up to three flags. The sockets accommodate up to 1 14 poles.NOTE: One of the following model specific mounting and hardware sets shown below must be ordered separately to make a complete flag holder assembly.HWK010 - for any motorcycle with an existing trailer hitch. HWK015 - For all 2008 and earlier Harley-Davidson FL FLH models HWK020 - For all 2009 newer Harley-Davidson FL FLH models

Part Number: PF1000
MSRP: CAN$101.82  Price: CAN$100.28

Quick Detach Rack - Harley Touring ModelsQuick Detach Rack - Harley Touring Models
This 11 x 16 quick detach rack can be installed or removed in seconds by slipping the male pins on the rack into the receiver brackets and securing with the supplied locking pins. This rack is made from strong lightweight aircraft aluminum and powder coated in bright silver. While the rack been tested to 250 lbs. its rated at a 35 lb. maximum load capacity to maintain good handling characteristics. Itll easily accommodate small to medium sized coolers and luggage as well as our No.RB100 custom waterproof bag and No.SPTCDY sports caddy. Additionally the use of No.CRLGHT LED tail lights and license plate mount is strongly recommended because all but the smallest of bags may cover the tail lights license plate and turn signals.NOTE: Model specific hardware requires the use of RIVCO products HWK015 or HWK020 Mounting Kits which include the model correct chrome receiver brackets that bolt on between the saddlebags and fender.

Part Number: QD1000
MSRP: CAN$93.98  Price: CAN$92.45

Quick Detach Trailer Hitch Cooler Rack 11inx16inQuick Detach Trailer Hitch Cooler Rack 11inx16in
This lightweight aluminum luggage rack bolts to your trailer hitch tongue. The rack measures 11x16 to accommodate most small to medium size coolers and duffel bags and has holes around the edge for bungee cords or nets. While it is strong enough to hold a 200lb person it is rated at a maximum of 35lbs capacity due to handling and cornering performance.

Part Number: GL18008
MSRP: CAN$133.16  Price: CAN$130.84

Rack Bag - WaterproofRack Bag - Waterproof
This durable bag is made specifically for use with either of our 11x16 quick-detach hitch rack. The bag is made from heavy-duty water-resistant nylon and the main compartment measures 11x16x12 tall. Using this bag will give you an additional 35 more storage. Used with the rack it will keep the weight down low and not adversely affect handling.It has zippered outer storage compartments on three sides carry handles a detachable shoulder strap a hidden stretch fit water and dust proof cover. It also has slots in the bottom that allow it to be locked to the rack using the optional locking rods. Not only does this offer added security it means no taking off the bungee net every time you want to open the bag. Or if you choose it can be bungeed to our Rivco rack or any other rack or backrest.

Part Number: RB100
MSRP: CAN$62.64  Price: CAN$61.89

Rack Bag Dowel Lock RodsRack Bag Dowel Lock Rods
This set of two locking rods will allow you to secure the RIVCO Rack Bag to the rack. The bag can be installed or removed in seconds. In addition to the added security of the bag being locked on to your rack you will have easy access to all compartments without having to remove bungees. Tumblers are keyed alike with weatherproof covers and the rods are stainless steel. Sold as a matching pair

Part Number: RBDL
CAN$35.22

Rapid Pulse KitRapid Pulse Kit
This small electronic module about the size of a D battery can be spliced into your existing air horn tail light or headlight circuit with built-in capabilities to make your ride safer. The pulsing effect causes your horn to pulse onoff at a speedy 7 times per second. This same effect can be used to pulse your brake light or headlight. Make your ride safer through horn noise creating sure animal flight and your lighting easier to see for automotive traffic. Plus your bike becomes even more of an attention getter at paradesEach module can pulse one accessory. To pulse multiple features you will have to order more modules.

Part Number: RAPPK
CAN$35.22

Rear License Relocator - Yamaha XV19 StratolinerRoadlinerRear License Relocator - Yamaha XV19 StratolinerRoadliner
Replaces the stock license plate holder with a custom close-to-the-fender laydown curved holder that matches the curve of the fender. Also included is a set of our SOMA super-bright wide-angle LED tail and brake lights. The LEDs provide a great deal of extra visibility for the stock tail light which while stylish does not provide adequate rear lighting. The mounting bracket is billet aluminum the plate holder is laser-cut steel and both are triple chrome plated. All wiring is concealed no drilling required and this product connects easily to stock tail light wires.

Part Number: XV19105
MSRP: CAN$109.65  Price: CAN$108.12

Receiver Bracket Mounting Kit for Motorcycles with Trailer HitchesReceiver Bracket Mounting Kit for Motorcycles with Trailer Hitches
This kit contains the chromed receiver bracket and all equipment required for mounting the RIVCO Products Parade Flag Holder RIV-PF1000 and Quick Detach Rack RIV-QD1000 on motorcycles with existing hitches. Kit attaches directly to your motorcycles hitch and includes complete photo-detailed instructions for easy installation.

Part Number: HWK010
CAN$31.3

Rider Floorboards with Heel Toe ShifterRider Floorboards with Heel Toe Shifter
Enjoy the highest level of comfort as well as obvious great looks. A must have for long distance touring the ultimate in comfort. These premium-quality boards measure 12 x 5 and include a matching brake pedal and heel rest. The matching heel rest allows your toe to have maximum leverage on the pedal which ensures immediate braking in traffic. Also included is a heel-toe shifter that is adjustable for shoe sizes 7-14 and engineered to provide smooth and positive shifting For more room see our GL1800 Driver Board Toe Shifter Extension GL18020-SE. They are CNC machined from billet aircraft quality aluminum and triple chrome plated. The rubber inlays are specially formulated from a high quality neoprene designed to resist UV ozone and abrasion as well as reduce fatigue from vibration. The boards are the same height as the stock foot pegs to maintain maximum cornering clearance. Patents Pending.

Part Number: GL18020
MSRP: CAN$313.36  Price: CAN$307.12

S.O.M.A. LED Safety Flashing Tail and Brake Light KitS.O.M.A. LED Safety Flashing Tail and Brake Light Kit
ulliThe most common type of motorcycle accident is easily preventable with these products. liMost motorcycles especially cruisers have small too small tail lights to provide adequate visibility from behind but now you can keep the styled appearance of a small custom tail light with these super-bright LED lights. liThis kit gives you the safety and visibility you need and the custom look you want. liKit includes two flexible S.O.M.A. LED lights with an amazing 135 degree range-of-viewing brightness and our FLSH LED Tail and liFlashing Brake Modulator which makes the LEDs function as both tail lights and brake lights. liThe included brackets fit between the license plate and holder and can be used vertically or horizontally. liSo be safe - ride bright and ride smartul

Part Number: SOMAKIT
MSRP: CAN$78.31  Price: CAN$76.78

Sidestand Pad for Triumph AmericaSpeedmasterSidestand Pad for Triumph AmericaSpeedmaster
This clever pad slides over the stock sidestand foot and is secured with a setscrew. It has over two time the area of the original. No more worries about your motorcycle falling over or fumbling around looking for your sidestand plate. Machined from billet aluminum and triple chrome plated.

Part Number: TA013
CAN$31.3

Sidestand Pad for Triumph Rocket III Models 06 and earlierSidestand Pad for Triumph Rocket III Models 06 and earlier
This innovative pad slides over the stock sidestand foot and is secured with a set screw. At over twice the area of the original - no more motorcycle falling or fumbling around looking for your sidestand plate. Machined from billet aluminum and triple chrome-plated.

Part Number: TR3013
CAN$33.65

Sidestand Pad for Triumph Rocket III Models with Factory Floorboards 07 and newerSidestand Pad for Triumph Rocket III Models with Factory Floorboards 07 and newer
This innovative pad slides over the stock sidestand foot and is secured with a set screw. At over twice the area of the original - no more motorcycle falling or fumbling around looking for your sidestand plate. Machined from billet aluminum and triple chrome-plated.

Part Number: TR3013-2
CAN$33.65

Solo Rack - Triumph Rocket IIISolo Rack - Triumph Rocket III
The rack bolts on when the passenger seat is removed it is laser cut from steel formed to hug the contour of the rear fender polished and triple chrome plated. With the removal of three bolts under the seat you can easily return to the passenger seat.

Part Number: TR3010
MSRP: CAN$117.49  Price: CAN$115.17

Solo Rack for Triumph AmericaSolo Rack for Triumph America
Give your America the custom solo look that says No passengers this ride is all about me. Laser cut hand polished to a flawless finish and triple chrome-plated. Mounts using the same two bolt holes as the stock passenger seat so you can switch back to the seat in minutes when its all about taking someone along for the ride.

Part Number: TA010
MSRP: CAN$117.49  Price: CAN$115.17

SOMA Flexible LED Lighting StripSOMA Flexible LED Lighting Strip
A safety must to prevent rear end collisions. These new L.E.D.s are the brightest most compact high quality lights yet They measure only 38 x 3 long with 15 L.E.D.s in each. Have you ever noticed how all L.E.D lights only appear really bright when you are looking at them directly S.O.M.A.s have the widest Full Brightness viewing angle 135 compared to most others at only 20. This means greatly improved visibility from any angle. The strips are flexible will conform to curved surfaces and have an adhesive backing that really sticks and theyre waterproof. The set includes two 15 L.E.D. light strips with 36 wires a dual function tailbrake light electronic module that is no bigger than a pea wire connectors and detailed instructions. Average installation time is 20-30 minutes.

Part Number: SOMA1
CAN$35.22

SOMA License Plate Brackets - BlackSOMA License Plate Brackets - Black
Use these optional mounting brackets when there is no other suitable spot to mount the lights. They fit between the license plate and holder and can be used horizontally or vertically top or bottom. Adjustable for any size license plate.

Part Number: SOMABB
CAN$15.63

SOMA Super L.E.D. 18 in. Brake LightSOMA Super L.E.D. 18 in. Brake Light
Mounts easily simple electric hook-up 18 long with 22 L.E.D.s and functions as a tail and brake light. It will greatly increase the visibility of any motorcycle especially when mounted to the trunk. Fits most bikes with a trunk. Comes with detailed instructions.

Part Number: SBRKL
MSRP: CAN$54.81  Price: CAN$54.05

Spiked Chrome Windshield Accent Molding - Harley Touring ModelsSpiked Chrome Windshield Accent Molding - Harley Touring Models
This chromed spiked accent piece dresses up the front of your bike while showcasing the color of your fairing. The design is cut from high-quality steel polished to a high luster finish and triple chrome-plated. Attaches in minutes to the existing windshield mounting holes.

Part Number: HD910
MSRP: CAN$86.15  Price: CAN$84.61

Spin-on Filter Adaptor for YamahaSpin-on Filter Adaptor for Yamaha
This spin-on oil filter adapter is engineered to replace your existing OEM filter. It allows you the flexibility of using standard spin-on automotive filters that can be purchased at local discount stores everywhere at considerable savings. Once the adapter is installed simply spin off the old filter and spin on the new No need to remove the lower cowling or the accessory air dam. Installation is straight forward and uncomplicated. Uses Fram PH-3950 oil filters or comparable. You can change your oil filter by hand or with a filter wrench without removing any more than just the filter itself.

Part Number: YF-01
MSRP: CAN$78.31  Price: CAN$76.78

Sports CaddySports Caddy
Add this Sports Caddy attachment to one of our quick detach racks and youll discover a whole new dimension in motorcycling. How many times have you loaded up your golfing fishing or hunting gear in your vehicle while thinking to yourself Man its so nice out I wish I could take the bike. Well this is the way to have your cake and eat it too The Sports Caddy attachment bolts on quickly to either of RIVCOs small quick-detach racks. It measures 10 wide at the cradle 30 tall and will accommodate most golf bags even with a wheeled caddy as well as most sporting gear. Included upper and lower web straps with positive locking quick release buckles. It weighs less than 2lbs. and is finished in the same durable bright silver powder coating as the rack.

Part Number: SPTCDY
MSRP: CAN$70.48  Price: CAN$69.72

Suzuki M109 Adjustable Highway MountsSuzuki M109 Adjustable Highway Mounts
Attractive and extremely functional this set of highway mounts is designed specifically for the M109. The adjustable arms have 28 positive locking positions through a 10 range of motion. They are made from laser-cut CNC machined steel hand polished to a flawless finish triple chrome plated and include stainless steel mounting hardware. These mounts are compatible with all RIVCO pegs and floorboards as well as others using 38 mounting bolts.

Part Number: SM9004
MSRP: CAN$117.49  Price: CAN$115.17

Suzuki M109 Brake Pedal CompleteSuzuki M109 Brake Pedal Complete
This product replaces the stock brake pedal is machined from solid steel and triple chrome plated. An easy fix to the problem that Suzuki riders have with the rear brake pedal: the stock pedal takes away foot space from the peg which quickly gets uncomfortable. Not to mention having to swing your foot out from under the pedal to brake becomes awkward and unsafe. This new pedal allows room for your foot and offers increased leverage for extra braking power. The pedal also features rubber rings which provide a secure surface for braking.

Part Number: SM9025
MSRP: CAN$74.39  Price: CAN$73.64

Suzuki M109 Driving LightsSuzuki M109 Driving Lights
These billet aluminum driving light arms are CNC machined and triple chrome plated. The set includes our 4-5560 watt halogen lights. This new light is made specifically for larger motorcycles the housings are hydroformed steel which we polish and triple chrome plate to a flawless finish. The lenses are impact resistant Lexan and they have replaceable 5560 watt halogen bulbs that really light up the road. The set installs easily and also included is a waterproof switch and relay. Requires the use of our No. SM9104 front turn signal relocation kit.

Part Number: SM9006
MSRP: CAN$235.01  Price: CAN$230.34

Suzuki M109 Front Turn SIgnal Relocation KitSuzuki M109 Front Turn SIgnal Relocation Kit
This turn signal relocation bracket bolts on easily without any wiring modification does away with the big ugly stock signal mounts and tucks them in close to the forks and headlight for a much cleaner and custom look. For use with item SM9006 Driving Lights.

Part Number: SM9104
MSRP: CAN$54.81  Price: CAN$54.05

Suzuki M109 Handlebar Risers with CapsSuzuki M109 Handlebar Risers with Caps
Replacing the stock risers this set will bring the handlebars back towards the rider 2. This significantly reduces the riders reach and back strain. The curved ladder design and matching top clamps will give your M109 a strong custom look. The set is machined from billet aluminum polished to a flawless finish and triple chrome plated. They install easily and retain all stock cables hoses and wiring.

Part Number: SM9017
MSRP: CAN$211.51  Price: CAN$207.62

Suzuki M109 Passenger BoardsSuzuki M109 Passenger Boards
Machined from billet aluminum and triple plated chrome finish. The inlaid rubber pads are made from soft anti-vibration neoprene rubber to further ensure passenger comfort. They will fold and lock in the up position with spring loaded detents when not in use.Shown with optional SM9005-5 Relocation Arms to move them another 4 forward and allow different height positions. Sold separately

Part Number: SM9005
MSRP: CAN$227.18  Price: CAN$223.29

Suzuki M109 Passenger Floorboard Relocation ArmsSuzuki M109 Passenger Floorboard Relocation Arms
When saddlebags are installed on this model there is little or no room between the passenger peg and the saddlebag for the passengers heels. By moving the boards forward 4 you will gain the needed heel room as well as allow the passenger to be in a more relaxed position. The relocation arms have height adjustments above at and below the stock peg height.

Part Number: SM9005-5
MSRP: CAN$62.64  Price: CAN$61.89

Suzuki M109 Rear SignalLicense Plate Relocation KitSuzuki M109 Rear SignalLicense Plate Relocation Kit
This bracket will move the license plate up 2 to show off that wide rear tire and bring the turn signals in 3 closer to the fender on each side for a clean custom look.

Part Number: SM9105
MSRP: CAN$54.81  Price: CAN$54.05

Suzuki M109 Tachometer Relocation KitSuzuki M109 Tachometer Relocation Kit
Relocates and conceals the tachometer inside the fairing. While it remains plainly visible to the rider it completely does away with the large chrome housing that sits on top of the risers and disturbs the styled look for the M109. Once youve seen it this way it just doesnt look right stock. Can be used with stock or RIVCO risers.

Part Number: SM9018
MSRP: CAN$58.72  Price: CAN$57.97

Swingarm Cover - Triumph Rocket IIISwingarm Cover - Triumph Rocket III
Covers all outside surfaces and the end of the swingarm. Made from laser-cut formed steel triple chrome plated and adds a lot of shine to your Rocket III motorbike for very little money. Attaches quickly and securely using the brake hose guide clip bolt.

Part Number: TR3015
MSRP: CAN$46.97  Price: CAN$46.22

Switch Mount Cup Holder ChromeSwitch Mount Cup Holder Chrome
An accessory capable of holding drink containers beverages cell phones sunglasses radios and keys. It features a separate inner insulated lining that detaches easily from the chromed steel beverageaccessory holder and chrome-plated mounting hardware. Foam inserts accommodate 12 oz. cans 16 and 20 oz. bottles. Includes all the hardware necessary to mount on switch housings either side on Harleys as well as Gold Wings instead of clamping on the handlebar. Comes individually boxed with an Allen wrench for easy assembly.

Part Number: CH500
CAN$35.22

Switch Mount Cup Holder LeatherSwitch Mount Cup Holder Leather
A leather-wrapped accessory capable of holding drink containers beverages cell phones sunglasses radios and keys. It features a separate inner insulated lining that detaches easily from the chromed steel beverageaccessory holder and chrome-plated mounting hardware. Foam inserts accommodate 12 oz. cans 16 and 20 oz. bottles. Includes all the hardware necessary to mount on switch housings either side on Harleys as well as Goldwings instead of clamping on the handlebar. Comes individually boxed with an Allen wrench for easy assembly.

Part Number: CH600
MSRP: CAN$43.05  Price: CAN$42.3

Tachometer Kit - VTX 1300 RetroTachometer Kit - VTX 1300 Retro
VTX Retro Tachometer Kit. This high quality unit includes a 0-8000 RPM electronic VDO tachometer. It has a 240 needle sweep black face with white numerals and an internal 12v light. The bullet shaped rear housing and mounting plate are CNC machined from Billet Aluminum and finished in a triple plated chrome process. Installs in 20 minutes. Comes complete with all hardware wiring and detailed full color instructions.

Part Number: VTX13018
MSRP: CAN$235.01  Price: CAN$230.34

Telescoping Flag PoleTelescoping Flag Pole
This collapsible telescoping flag pole goes from 18 small enough to fit in most saddlebags to 6 12 feet in seconds with positive twist locks inside each section. The bottom section is 1 14 in diameter and slides snugly into all our parade flag holders. Made from lightweight and strong aircraft aluminum tubing. It has a durable silver anodized finish quick release flag mounting clips and is topped off with an attractive gold ball. NOTE: This flag pole is meant for parade use only and is recommended for use at a maximum speed of 25 mph. Due both to the adverse handling that a flag can cause at higher speeds as well as the load limit of the flag pole.

Part Number: PFPOLE
CAN$35.22

The Wench Oil Filter Wrench - 90-Up HDThe Wench Oil Filter Wrench - 90-Up HD
Tired of skinned knuckles and tools that dont work Get the Wench the one that works Using the stock filter with minimal clearance between the crankcasesensor and the filter it allows you to easily get in that tight spot to crack the filter loose without slipping. The small end also features a built-in drain plug wrench making this your all-in-one oil change tool. Every Harley owner needs to have a Wench

Part Number: HD-021
CAN$15.63

The Wench Oil Filter Wrench - Harley Models 90 and newerThe Wench Oil Filter Wrench - Harley Models 90 and newer
Tired of skinned knuckles and tools that dont fit Made for late models 90 and newer with little clearance between the crankcase or sensor and the filter this wrench allows you to easily get in that tight spot and rotate the filter without slipping. Small end has built-in drain plug wrench. Works on all stock Harley-Davidson oil filters. No Harley owner should be without the one that works

Part Number: HD021-EA
CAN$15.63

Tour Box Passenger Drink Holder - Harley DavidsonTour Box Passenger Drink Holder - Harley Davidson
ulliAn innovative design that is is easy to install and designed for passenger convenience and comfort. liCNC laser cut machined from high quality steel and black powder coated. liDesigned for multiple drink positions and total passenger convenience.liDrink koozie includedul

Part Number: HD400
MSRP: CAN$62.64  Price: CAN$61.89

Trailer Hitch - All Aluminum Hidden Receiver Type - Honda Goldwing GL1800 01 to 11Trailer Hitch - All Aluminum Hidden Receiver Type - Honda Goldwing GL1800 01 to 11
Super strong super light completely hidden Gold Wing trailer hitch. Machined entirely out of aircraft aluminum weighing in at less than 8 lbs it attaches to the MAIN FRAME ONLY no flimsy sub-frame attachments as seen in other brands. Compatible with both Heim joint and ball style couplers. The hitch is strong enough to lift the 834lb. GL1800 yet it does not restrict the ability to remove the rear tire. The key to its superior strength and rigidity is lightweight aircraft aluminum and proper basic design elements like perfect triangulation of the mounting points not heavy masses of steel. The package includes the hitch and a triple chrome plated 3 drop tongue. Fits 2001 through 2011 years Honda GL1800.

Part Number: GL18007-20
MSRP: CAN$235.01  Price: CAN$230.34

Trailer Hitch for Harley Tri Glides 09-10Trailer Hitch for Harley Tri Glides 09-10
This super-strong receiver type hitch is the finest available. Our U.S. made hitch is fabricated from laser cut steel hand welded then powder coated - and bolts directly to the frame in minutes. The tongue and 1 78 ball are triple chrome plated receiver is almost completely hidden and the tongue installs easily using a hitch pin and clip. This hitch is made for use with or without Harley-Davidsons optional rear bumper. Tongue height is 11 which accommodates most trailers. Includes plug-and-play wire harness and all necessary hardware.

Part Number: HD007-TG
MSRP: CAN$235.01  Price: CAN$230.34

Trailer Hitch for Harley Tri Glides 2011 and newerTrailer Hitch for Harley Tri Glides 2011 and newer
This super-strong receiver type hitch is the finest available. Our U.S. made hitch is fabricated from laser cut steel hand welded then powder coated - and bolts directly to the frame in minutes. The tongue and 1 78 ball are triple chrome plated receiver is almost completely hidden and the tongue installs easily using a hitch pin and clip. This hitch is made for use with or without Harley-Davidsons optional rear bumper. Tongue height is 11 which accommodates most trailers. Includes plug-and-play wire harness and all necessary hardware.

Part Number: HD007-TG11
MSRP: CAN$235.01  Price: CAN$230.34

Trailer Hitch for HD FLTFLH 09 and newerTrailer Hitch for HD FLTFLH 09 and newer
This powerful U.S.-made hitch designed for 2009 and newer frames has been engineered to be the best available anywhere. Laser-cut from high tensile strength steel then formed and TIG welded by hand for superior fit strength and reliability it mounts to the frame of the motorcycle at four points two at the end of the frame rails behind the shock and two at the lower crash bars mounting points plus two additional points at the bottom of the crash bars- NOT to the rear fenders like most brands This design provides the greatest strength and stability while placing no strain on the sheet metal rear fender which WONT support the added weight stress shock and vibration which trailer towing causes. Easy bolt-on installation with the plug-in wire harness SOLD SEPARATELY means you can easily do it yourself - no cutting drilling or wire splicing. When installed the power coated black main hitch frame is virtually unseen with only the removable chrome vertical receiver visible. To remove the receiver simply remove the hitch pin from under the fender and slide it out when not in use and unlike other brands its almost impossible to tell you have a hitch and the ball is removable. This is the strongest lightest most precision made easiest to install wire hitch on the market today. Includes ball.

Part Number: HD007
MSRP: CAN$235.01  Price: CAN$230.34

Trailer Isolator Wire Harness for GL1800Trailer Isolator Wire Harness for GL1800
This isolator unit is designed to prevent any damage or malfunction of electronic ignition fuel injection ABS braking systems and other sensitive electrical components. This isolator unit is designed to prevent any damage or malfunction of electronic ignition fuel injection ABS braking systems and other sensitive electrical components on motorcycles. The O.E.M. taillight circuits wires and fuses are not heavy duty enough to handle the additional load from trailer lighting. This causes both the motorcycle and trailer lights to become dim as well as overheat the wiring and blow fuses. The isolator draws all the power required for the trailer lighting directly from the battery pos. terminal through its own heavy-duty wiring and fuse. The isolator electronic components sense the need for power to the taillights and are activated through its smaller gauge wires which connect to the motorcycles taillight. It will provide full battery voltage to the trailers taillights. This allows both the trailer and motorcycles taillights to be at full intensity. It measures 1 inch x 1 12 inches x 3 inches long has a peel and stick adhesive backing and 36 inch wire leads in a loom ready to accept any trailer plug making it easy to install and conceal. Comes complete with all connectors needed and detailed instructions.

Part Number: GL18007-I
MSRP: CAN$50.89  Price: CAN$50.14

Trumpet Covers prTrumpet Covers pr
Covers the front of the trumpets to protect from bugs dirt and road grime. Replacement Only pre-installed on all horn kits.

Part Number: COVERS
CAN$19.55

Trunk Mounted Single Flag Holder KitTrunk Mounted Single Flag Holder Kit
This high quality flag holder and pole are U.S. made from stainless steel and aluminum then hand polished to a brilliant finish. Built to last a lifetime the base and finial are triple chrome plated and all other components are stainless steel. The base has super-strong adhesive tape and optional through trunk stud for secure mounting. 14 pole topped with chrome finial will accommodate all flags up to 12 tall and includes clips to keep flags in place at the top of the poles. Note: Flags not included.

Part Number: FH200
CAN$35.22

Universal LED MirrorsUniversal LED Mirrors
LEDs on both sides. Mirror is convex glass. Dimensions: 3 x 5.5Includes metric adapters so they fit any motorcycle. Comes with detailed installation instructions.

Part Number: MIRLED
MSRP: CAN$195.84  Price: CAN$191.95

Universal Trailer Isolator HarnessUniversal Trailer Isolator Harness
This isolator unit is designed to prevent any damage or malfunction of electronic ignition fuel injection ABS braking systems and other sensitive electrical components on most motorcycles. This isolator unit is designed to prevent any damage or malfunction of electronic ignition fuel injection ABS braking systems and other sensitive electrical components on most motorcycles. The O.E.M. taillight circuits wires and fuses are not heavy duty enough to handle the additional load from trailer lighting. This causes both the motorcycle and trailer lights to become dim as well as overheat the wiring and blow fuses. The isolator draws all the power required for the trailer lighting directly from the battery pos. terminal through its own heavy duty wiring and fuse. The isolator electronic components sense the need for power to the taillights and are activated through its smaller gauge wires which connect to the motorcycles taillight. It will provide full battery voltage to the trailers taillights. This allows both the trailer and motorcycles taillights to be at full intensity. It measures 1 inch x 1 12 inch x 3 inch long has a peel and stick adhesive backing and 36 inch wire leads in a loom ready to accept any trailer plug making it easy to install and conceal. Comes complete with all connectors needed for the motorcycle and detailed instructions.

Part Number: GL18007-IU
MSRP: CAN$54.81  Price: CAN$54.05

Valkyrie Driveshaft CoverValkyrie Driveshaft Cover
This form steel cover is triple chrome plated and fits over the driveshaft housing left side of swingarm installs in minutes with clamps provided.

Part Number: VAL016
CAN$33.65

Valkyrie Rune Billet Highway Mounts without PegsValkyrie Rune Billet Highway Mounts without Pegs
The outside of the arms have six different facets or flat surfaces and match the Runes styling and lines perfectly. We have also concealed the stainless steel hardware to give them an even cleaner seamless look. The spider mounts themselves can be attached to any four of the false valve cover bolt holes there is no oil beneath this outer cover or its bolts. This allows you to place them where you want based on your size and preference. Also the arms can be rotated to one of 56 different positions and locked in place to provide complete adjustability and maximum comfort. They are triple chrome plated and can be used with any of RIVCOs highway peg sets.

Part Number: NRX004
MSRP: CAN$227.18  Price: CAN$223.29

Valkyrie Rune Six-Pack MufflersValkyrie Rune Six-Pack Mufflers
Get an even bigger custom look better sound and more power for your Rune. What an amazing improvement The stacked and upswept megaphone design along with the deep throaty six cylinder roar will have you turning more heads and answering more questions than ever about your Rune. The ends of the megaphones are also stacked into a V shape when viewed from the rear for cornering clearance and a look that says it goes as good as it looks. This design also keeps exhaust soot off the rear wheel and final drive housing a constant problem with the stock exhaust that requires cleaning every 50 miles to keep it looking good. This set of 6 megaphone mufflers replaces the originals while retaining the stock header pipes and their chrome heat shields. The removable baffles are tuned for increased performance as well as a louder and deeper sound. They are mechanical type baffles which means there is no fiberglass packing to wear out or need service later. No changes to fuel injection system required. Independent dynamometer testing showed an increase of 4.5 HP and 6 ft.-lbs. of torque.

Part Number: NRX600
MSRP: CAN$858.68  Price: CAN$842.25

Victory Chrome Battery Box CoverVictory Chrome Battery Box Cover
Installs in minutes covering the unattractive black part of the battery box that hangs out below the side cover. It is laser cut and formed from high quality steel polished to a flawless finish and triple chrome plated. Slips over the existing cover and is held in place with double sided 3M Tape. Fits all models.

Part Number: VKP071
MSRP: CAN$43.05  Price: CAN$42.3

Victory Clutch Arm CoverVictory Clutch Arm Cover
The clutch arm on any Victory always seems out of place. This billet aluminum cover should be one of the first accessories to add when customizing your Victory. Its triple chrome plated will slip on over the clutch arm and is secured with a setscrew.

Part Number: VKP073
CAN$35.22

VTX Air HornsVTX Air Horns
No matter what your style, CruiserCustomizing.com brings you a unique offering of motorcycle parts and accessories.

Part Number: AHVTX
MSRP: CAN$140.99  Price: CAN$138.67

VTX Handlebar Risers ChromeVTX Handlebar Risers Chrome
Great for cruising comfort. CNC machined billet aluminum triple plated chromed and polished to a flawless finish. The risers bring back the bars 1 12 and up 34. This significantly reduces the riders back strain and allows for a more relaxed cruiser style of riding. Bolts on in minutes and retains all stock cables hoses and wiring.

Part Number: VTX017-2
MSRP: CAN$143.34  Price: CAN$141.02

VTX1300 C Model Handlebar RisersVTX1300 C Model Handlebar Risers
This set of risers replaces the originals and will bring the handlebars up 1 and back toward the rider 2. While it may not sound like a lot the 2 gives you a much more upright seating position rather than reaching over the gas tank. This will significantly reduce back neck and shoulder fatigue. They are machined from billet aluminum and retain the stock cables and hoses.

Part Number: VTX13C017
MSRP: CAN$117.49  Price: CAN$115.17

VTX1300 Driveshaft CoverVTX1300 Driveshaft Cover
This cover is triple chrome plated covers the shaft installs in minutes using the provided springs. Will not vibrate.

Part Number: VTX13016
CAN$33.65

VTX1300 Driving LightsVTX1300 Driving Lights
BE SAFE BE SEEN Give your VTX that BIG BOY look as well as greatly improving night vision and visibility. Compatible with all leading windshields. Visors and halogen light bulbs available. Triple chrome plated comes with onoff switch and all necessary wiring and hardware. Also fits the VTX1800 CR Models.Spotlights are 4 12 inches.Visors and halogen lightbulb sold separately.

Part Number: VTX13006
MSRP: CAN$188  Price: CAN$184.9

VTX1300 Front Fender BumperVTX1300 Front Fender Bumper
Great Retro Look This fender bumper adds that classic cruiser look from days gone by. Made from high quality steel and triple chrome plated. Our bumper enhances the front fender and gives the VTX a true retro look. Brazed so it wont rust the bumper fits the Retro model only and does not fit with fender tips.Note: Will not fit with fender tips.

Part Number: VTX13011F
MSRP: CAN$62.64  Price: CAN$61.89

VTX1300 Handlebar Risers AluminumVTX1300 Handlebar Risers Aluminum
Aluminum finished handlebar risers for Honda VTX1300RS Retro. These CNC Machined Billet Aluminum Risers bring the handlebars back towards the rider 1 12 and up 34. This significantly reduces the riders back strain and allows a more upright position rather than a leaning forward making long rides a pleasure. They bolt directly on in minutes and retain the stock cables hoses and wiring.

Part Number: VTX13017A
MSRP: CAN$127.67  Price: CAN$125.35

VTX1300 Highway Mounts without PegsVTX1300 Highway Mounts without Pegs
These mounts are laser cut CNC machined steel with a triple chrome plated finish. Includes all necessary stainless steel hardware for mounting. We have machined a U shaped mounting bracket that wraps around the frame downtube and attaches to a solid steel mounting block with a special pad to grip the frame securely to prevent slipping and without damage to the frame. The arm itself is 5 long and is machined with a series of holes in the arm and in the mounting block with a locking pin that allows over 72 DIFFERENT MOUNTING ANGLES not to mention that it can slide up and down on the frame down tube about an inch or so.

Part Number: VTX13004
MSRP: CAN$117.49  Price: CAN$115.17

VTX1300 Steering CoversVTX1300 Steering Covers
These steering head covers replace the unsightly black stock covers. Made from ABS plastic triple chrome-plated snaps in place easily and dramatically enhances the look of your bike. Covers the most visible part of the stock steering head.

Part Number: VTX13019
MSRP: CAN$46.97  Price: CAN$46.22

VTX1800 Billet Front Caliper Covers prVTX1800 Billet Front Caliper Covers pr
These Billet Front Caliper Covers sold in pairs hide most of the dull black finish and add an eye-catching accent to the brake calipers. They are CNC machined from billet aluminum and triple chrome plated. The covers attach easily and securely using 3M VHB double faced tape.

Part Number: VTX030
CAN$31.3

VTX1800 C Model Solo RackVTX1800 C Model Solo Rack
Go from cool solo look to passenger comfort with RIVCOs quick detach design. The rack is laser cut from steel formed to hug the contour of the rear fender polished and then triple chrome plated. This rack allows you to go back and forth between solo rack and passenger seat in seconds without tools and comes with all required stainless steel hardware and detailed mounting instructions.

Part Number: VTXC010
MSRP: CAN$117.49  Price: CAN$115.17

VTX1800 Driveshaft CoverVTX1800 Driveshaft Cover
This form steel cover is triple chrome plated and fits over the driveshaft housing left side of swingarm. Installs in minutes with clamps provided.

Part Number: VTX016
CAN$33.65

VTX1800 Handlebar Risers - Aluminum FinishVTX1800 Handlebar Risers - Aluminum Finish
Great for cruising comfort. CNC machined billet aluminum triple plated chromed and polished to a flawless finish. The risers bring back the bars 1 12 and up 34. This significantly reduces the riders back strain and allows for a more relaxed cruiser style of riding. Bolts on in minutes and retains all stock cables hoses and wiring.Fits NEW STYLE C NEO Models

Part Number: VTX017-2A
MSRP: CAN$117.49  Price: CAN$115.17

VTX1800 Highway Mounts without PegsVTX1800 Highway Mounts without Pegs
These mounts are Laser Cut CNC Machined Steel with a triple chrome plated finish. Includes all necessary stainless steel hardware for mounting. We have machined a U shaped mounting bracket that wraps around the frame downtube and attaches to a solid steel mounting block. A special pad to grip the frame prevents slipping without damage to the frame. The arm itself is 6 long and is machined with a series of holes in the arm and in the mounting block with a locking pin that allows over 72 DIFFERENT MOUNTING ANGLES plus it can slide up and down on the frame down tube about an inch or so. Anti-Vibration pegs sold separately.

Part Number: VTX004
MSRP: CAN$117.49  Price: CAN$115.17

VTX1800 Retro Risers ChromeVTX1800 Retro Risers Chrome
Chrome Handlebar Risers for the VTX1800RS Retro. These CNC machined billet aluminum risers bring the handlebars back towards the rider 1 12 and up 34. This significantly reduces the riders back strain. Allows a cruiser position rather than leaning forward making long rides a pleasure. They have a triple chrome plated finish bolt directly on in minutes and retain all stock cables hoses and wiring.

Part Number: VTXR017
MSRP: CAN$133.16  Price: CAN$130.84

VTX1800 Retro Tachometer KitVTX1800 Retro Tachometer Kit
VTX Retro Tachometer Kit. This high quality unit includes a 0-8000 RPM electronic VDO tachometer. It has a 240 needle sweep black face with white numerals and an internal 12v light. The bullet shaped rear housing and mounting plate are CNC Machined from Billet Aluminum and finished in a triple chrome plating process. Installs in 20 minutes comes complete with all hardware and wiring and detailed full color instructions.

Part Number: VTXR018
MSRP: CAN$235.01  Price: CAN$230.34

VTX1800 Sidestand PadVTX1800 Sidestand Pad
This clever pad slides over the stock sidestand foot is secured with a setscrew and it has over 2 times the surface area of the stock sidestand. No more worries about your motorcycle falling over or fumbling around looking for your sidestand plate. It is machined from billet aluminum and triple chrome plated.

Part Number: VTX013
CAN$29.73

VTX1800 Swingarm CoverVTX1800 Swingarm Cover
This unique part covers the right side of the swingarm on the top bottom and outside surfaces. It is laser cut and formed from .040 steel and finished in triple chrome plating. Attaches by using the two brake line mounting bolts.

Part Number: VTX015
CAN$35.22

VTX1800 Tachometer KitVTX1800 Tachometer Kit
This high quality unit includes a 0-8000 RPM electronic VDO tachometer. It has a 240 needle sweep black face with white numerals and an internal 12v light. The bullet shaped rear housing and mounting plate are CNC Machined from Billet Aluminum and finished in a triple chrome plating process. The sleek lines of the plate and housing along with the gauges small 2 diameter gives any VTX a custom serious business drag-bike look. Installs in 20 minutes. Comes complete with all hardware and wiring and detailed full color instructions.

Part Number: VTX018
MSRP: CAN$235.01  Price: CAN$230.34

Wiring Mounting Hardware - Bad Boy Air HornWiring Mounting Hardware - Bad Boy Air Horn
Wiring Mounting Hardware Kit for the Bad Boy Air Horn.

Part Number: EH340
CAN$31.3

Wiring Sub-Harness - GL1800 2012 - NewerWiring Sub-Harness - GL1800 2012 - Newer
This sub-harness connects to your GL1800 on one end and the isolator on the other making the connection Plug Play so you dont have to splice between the motorcycles wire harness and optional isolator or trailer plug.Note:Isolator sold separately

Part Number: GL18007-38
CAN$31.3

Yamaha Road Star Handlebar RisersYamaha Road Star Handlebar Risers
This set of handlebar risers are CNC machined from billet aluminum hand polished to a flawless finish and triple chrome plated. They replace the stock risers and bring the handlebars back toward the rider 2 14. This significantly reduces the riders back strain while allowing for a more relaxed cruiser style of riding. Easy to install and retains all stock cables hoses and wiring.

Part Number: XV17017
MSRP: CAN$143.34  Price: CAN$141.02

Yamaha Road Star Solo RackYamaha Road Star Solo Rack
Give your Road Star the custom solo look that says No passengers this ride is all about me. Laser cut hand polished to a flawless finish and triple chrome plated. Mounts using the same two bolt holes as the stock passenger seat so you can switch back to the seat in minutes when its all about taking someone along for the ride

Part Number: XV17010
MSRP: CAN$70.48  Price: CAN$69.72

Yamaha Royal Star Air HornsYamaha Royal Star Air Horns
Air horns for Royal Star 1996 Newer. These air horns give a loud warning blast of 125 decibles. Triple plated chrome trumpets mount to the bolts near the swing arm. Trumpets mount inward on the muffler just below the swing arm. Compressor mounts directly behind the stock horn. May or may not use stock horn. Virtually unseen but same life saving decibel level. All Trumpets are now TRIPLE CHROME PLATED every set now comes with chrome trumpets NO EXTRA CHARGE Item : AHRSV Amount : 144.95

Part Number: AHRSV
MSRP: CAN$156.66  Price: CAN$153.56

Yamaha XV19 StratolinerRoadliner Handlebar Risers wCapsYamaha XV19 StratolinerRoadliner Handlebar Risers wCaps
Replacing the stock risers this set will bring the handlebars up 1 and back 2 14 reducing the riders reach to the bars and back strain. The risers include top clamps with hidden hardware bolts come from bottom up for a true custom cruiser look. The set is machined from billet aluminum polished to a flawless finish and triple chrome plated. These risers install easily and retain all stock cables hoses and wiring.

Part Number: XV19017
MSRP: CAN$172.33  Price: CAN$169.23

Yamaha XV19 StratolinerRoadliner Passenger Board Relocation ArmsYamaha XV19 StratolinerRoadliner Passenger Board Relocation Arms
Used to move the passenger boards forward 4 and have three different height adjustments. By moving the boards forward 4 you will gain the extra needed heel room when saddlebags are installed as well as allow the passenger to be in a much more relaxed and comfortable position.

Part Number: XV19005-5
MSRP: CAN$62.64  Price: CAN$61.89

Yamaha XV19 StratolinerRoadliner Passenger FloorboardsYamaha XV19 StratolinerRoadliner Passenger Floorboards
These boards measure 8x5 and are the ultimate in passenger comfort They greatly increase foot and leg support as well as allow variation in foot position on long rides. They are machined from billet aluminum and triple chrome plated. The inlaid rubber pads are made of soft anti-vibration neoprene rubber to further assure passenger comfort. These boards will fold and lock in the up position with spring loaded detents. Set installs in minutes using the original foot mounting brackets.

Part Number: XV19005
MSRP: CAN$227.18  Price: CAN$223.29
À PROPOS DE NOUS | LIVRAISON | RETOURS | DÉCLARATION DE CONFIDENTIALITÉ
Copyright © 2013 Tous les Droits Réservés.