PIÈCES DÈTACHÈE POUR MOTO No 1 en France

   

Wild1 Parts

>> Back to All Products

Bagger Ape Handlebar 14 Inch - Touring 08 - 09Bagger Ape Handlebar 14 Inch - Touring 08 - 09
LI14 Inch ape hanger for the FLHTC FLHX and all other bikes with bat wing fairings.LIFits the electronic throttle as in the 08-09 Touring models

Part Number: WO576
CAN$176.25

Billet Crystal GripsBillet Crystal Grips
LIUnique ergonomic design is super comfortable.LIPrecision machined.LIChrome-plated.LIFits H-D single or dual except models with air reservoirs

Part Number: WO650
CAN$97.9

Chubby 10 in. ApesChubby 10 in. Apes
For Those who want apes but dont want them too tall heres your custom solution. Like all Chubbys at a full 1 14 thick they maintain the line from your fork tubes right up through the grips. Pre drilled for internal wires knurled and show chrome plated for a sensational look. Fluid bends put your hands and wrist in the ultimate position for comfort and control.

Part Number: WO515
CAN$170.76

Chubby 12.5 in. Springer ApesChubby 12.5 in. Springer Apes
These sensational looking custom 1 14 thick bars mount on stock springer risers and work with most grips stock controls and some custom controls. Pre drilled for internal wires knurled show chrome plated and perfect bends combine for the ultimate in style and comfort.

Part Number: WO516
CAN$176.25

Chubby 16.0 in. Springer ApesChubby 16.0 in. Springer Apes
These sensational looking custom 1 14 thick bars mount on stock springer risers and work with most grips stock controls and some custom controls. Pre drilled for internal wires knurled show chrome plated and perfect bends combine for the ultimate in style and comfort.

Part Number: WO569
CAN$188

Chubby 8.5 in. Baby ApesChubby 8.5 in. Baby Apes
The perfect custom replacement for the stock buckhorns. Chubby 8.5 Baby Apes maintain the stock height but put your hands wrists in the perfect position for comfort and control. Like all Chubbys they are 1-14 thick pre drilled for internal wires kunurled show chrome plated and work with most grips stock risers stock controls and some custom controls. For the ultimate combo use our Chubby Risers and Billet Top Clamp.

Part Number: WO513
CAN$170.76

Chubby 9.5 in. Springer ApesChubby 9.5 in. Springer Apes
These sensational looking custom 1 14 thick bars mount on stock springer risers and work with most grips stock controls and some custom controls. Pre drilled for internal wires knurled show chrome plated and perfect bends combine for the ultimate in style and comfort.

Part Number: WO514
CAN$172.33

Chubby Ape Hangers 14 Inch Rise - Harleys 08 - 09Chubby Ape Hangers 14 Inch Rise - Harleys 08 - 09
LI1-14 Inch thick diameterLIPre-drilled for internal wiringLIKnurledLIWorks with all standard controls grips and risersLIShow chrome finishLIMade in USALIWill fit 2008-2009 H-D models Throttle by wire unless noted otherwise.liWidth: 36.5 inchesliEnd Rise: 14 inchesliCenter Width: 10 inchesliPullback: 12.5 inches

Part Number: WO572
CAN$172.33

CHUBBY APES - 12.5 in. RiseCHUBBY APES - 12.5 in. Rise
Awesome Apes In 12.5 And 16 Rise. Sensational Looking Full 1 14 Thick With A Brilliant Show Chrome Finish Knurled And Pre Drilled For Internal Wiring. Superior Bends Keep Your Arms And Wrists At The Best Angle For Control And Comfort. Use Your Stock Risers Or Better Yet A Set Of Chubby Risers And A Wild1 Billet Top Clamp.

Part Number: WO502
CAN$172.33

CHUBBY APES - 16 in. RiseCHUBBY APES - 16 in. Rise
Awesome Apes In 12.5 And 16 Rise. Sensational Looking Full 1 14 Thick With A Brilliant Show Chrome Finish Knurled And Pre Drilled For Internal Wiring. Superior Bends Keep Your Arms And Wrists At The Best Angle For Control And Comfort. Use Your Stock Risers Or Better Yet A Set Of Chubby Risers And A Wild1 Billet Top Clamp.

Part Number: WO509
CAN$176.25

Chubby Beach Bar - FLSTCF FLHRChubby Beach Bar - FLSTCF FLHR
Spectacular custom Chubby Beach Bars for ROAD KING HERITAGE FATBOY CUSTOMS with super fluid bends and perfect hand wrist position for comfort and control. Show chrome plated knurled and set up for internal wiring.Chubby Beach Bar is an awesome fit on FLSTC FLSTF FLHRCS and custom bikes. Optimum hand wrist placement provides maximum leverage comfort control. Work with stock risers top clamp controls cables and brake line on FLSTC FLSTF and FLHRS models.Specs: Width 36.5 end rise 3.5 center width 10.0 pullback 15.25.Note: Pictures show bar on Fat Boy Recommend replacing clamp to HD 55918-08

Part Number: WO550
CAN$168.41

Chubby Dragster Bar for SoftailChubby Dragster Bar for Softail
The absolute best bends for style comfort and control. 30.5 wide x 1 14 thick pre drilled for internal wires and show chrome plated. They look awesome with stock risers or Wild 1 Chubby Risers and Wild 1 Billet Top Clamp. Like all Wild 1 Chubby Bars they work with most grips and most controls. Bar Pictured on Softail

Part Number: WO511
CAN$101.82

Chubby Dragster Springer BarChubby Dragster Springer Bar
Custom drag bar mounts on stock Springer risers. 1 14 thick and 30.5 wide. Like all Wild 1 Chubbys they work with most grips stock controls various custom controls. Pre drilled for internal wires and show chrome plated for an awesome look.

Part Number: WO512
CAN$101.82

Chubby FLHTC Bagger Bar - 1-14 inchs thickChubby FLHTC Bagger Bar - 1-14 inchs thick
Custom designed for the FLHT FLHTC Electra Glide to enhance rider comfort. Depending on rotation when mounted 1.0 - 2.5 more end rise and 1.5 - 2.5 more pullback than the stock bars. An awesome look and they provide much better ergonomic hand wrist position for enhanced comfort leverage and control. The grips are still positioned behind the fairing and they work with the stock cables brake line and wiring. Pre drilled for internal wiring knurled and show chrome plated.Specs: Width 34.5 end rise 10.0 center 14.0 pullback 13.0. Note: Bar shown on FLHT

Part Number: WO575
CAN$168.41

Chubby Knuckle Bar for Fatboy Heritage FLHChubby Knuckle Bar for Fatboy Heritage FLH
WO503 Chubbys are super low wide for a cool custom look. Great for Fatboy Heritage FLH Shovel models custom bikes. Work with the stock cables brake line wiring.Width 36.5 end rise 2.0 center 10.0 pullback 8.5.

Part Number: WO503
CAN$159.01

Chubby Knuckle Bar for Fatboy Heritage Road KingChubby Knuckle Bar for Fatboy Heritage Road King
WO504 Chubbys are the ultimate combination of comfort control styling on Fatboy Heritage FLH Shovel models and custom bikes. Also great fit for tall riders on the Road King. Fluid bends that provide great hand and wrist placement for optimum riding position. Work with stock cables brake line wiring on FLSTF FLSTC FLHR models.Width 34.5 end rise 4.5 center 10.25 pullback 12.5.

Part Number: WO504
CAN$160.58

Chubby Low Profile Drag Bar - Dyna XL SoftailChubby Low Profile Drag Bar - Dyna XL Softail
Custom Chubby Low Profile Built in Riser Drag Bars. Designed for the ultimate fit on custom frames with additional rake and custom stretch rake frames. 30.5 wide with a 14.5 pullback and 4.0 end rise. The rotation angle of top bar compensates for additional rake and provides optimum hand and wrist placement. An awesome fit on Softail models FXST Deuce Fatboy Heritage FXDWG all Dyna models XL models they provide a super low profile look with maximum pullback. A great choice for riders that need additional pullback on stock rake bikes. They are a full 1 14 Thick with smooth polished riser welds a brilliant show chrome finish predrilled for internal wiring and work with stock most custom controls. Work with stock cables brake line wiring on most models. Note: Bar pictured on Duece.

Part Number: WO560
CAN$168.41

Chubby Low-Profile Pullback Drag Bars - Yamaha HondaChubby Low-Profile Pullback Drag Bars - Yamaha Honda
LIDesigned for riders that need maximum pullback on stack rake bikes and looks awesome on bikes with added rake.LISmooth polished riser welds and pre-drilled for internal wiring.LIWork with the stock controls and cables brake line and wiring on most models.LIFits Yamaha and Honda except VTX.Dimensions: 4 Rise 14 Pullback

Part Number: WO560M
CAN$168.41

Chubby Pullback Drag Bar - 10.0 in. DragsChubby Pullback Drag Bar - 10.0 in. Drags
Custom 1 thick with smooth polished riser welds and pre drilled for internal wiring. They are 30.5 wide with superior bends for comfort and control. Pullback risers are spaced 3.5 on center for standard triple trees threaded x 13. They clear the tank and dash on all stock model bikes and work with the stock cables brake line and wiring on most models. Specs: 10.0 Drags 6.5 end rise 12.5 pullback.Note: Bar pictured on FXDWG

Part Number: WO507
CAN$164.5

Chubby Pullback Drag Bar - 6 in. DragsChubby Pullback Drag Bar - 6 in. Drags
Custom 1 thick with smooth polished riser welds and pre drilled for internal wiring. They are 30.5 wide with superior bends for comfort and control. Pullback risers are spaced 3.5 on center for standard triple trees threaded x 13. They clear the tank and dash on all stock model bikes and work with the stock cables brake line and wiring on most models. Specs: 6.0 Drags 4.5 end rise 10.5 pullback.Note: Bar pictured on FXDWG

Part Number: WO500
CAN$164.5

Chubby Pullback Drag Bar - 8.0 in. DragsChubby Pullback Drag Bar - 8.0 in. Drags
Custom 1 thick with smooth polished riser welds and pre drilled for internal wiring. They are 30.5 wide with superior bends for comfort and control. Pullback risers are spaced 3.5 on center for standard triple trees threaded x 13. They clear the tank and dash on all stock model bikes and work with the stock cables brake line and wiring on most models. Specs: 8.0 Drags 5.5 end rise 11.5 pullback.Note: Bar pictured on Deuce

Part Number: WO501
CAN$164.5

Chubby Pullback Drag Bars 6 Inch Rise - Honda YamahaChubby Pullback Drag Bars 6 Inch Rise - Honda Yamaha
LI1-14 Inch diameter.LISmooth polished riser welds and pre-drilled for internal wiring.LIPullback risers are spaced 100mm on center.LIThey clear the tank and dash on stack model bikes and work with the stock controls and cables brake line and wiring on most models.

Part Number: WO500M
CAN$164.5

Chubby Pullback Drag Bars 8 Inch Rise - Honda YamahaChubby Pullback Drag Bars 8 Inch Rise - Honda Yamaha
LI1-14 Inch diameter.LISmooth polished riser welds and pre-drilled for internal wiring.LIPullback risers are spaced 100mm an center.LIThey clear the tank and dash on stack model bikes and work with the stock controls and cables brake line and wiring on most models.

Part Number: WO501M
CAN$164.5

Chubby Risers - 1-14 in Thick x 1 12 in. RiseChubby Risers - 1-14 in Thick x 1 12 in. Rise
The Ultimate In Your Face Enhancement To Your Front End What A Look 1 14 Thick x 1 12 3 12 4 12 6 5 12 9 12 Pullbacks. Precision Machined From Billet Aluminum With A Brilliant Show Chrome Finish. Chubby Risers Are Versatile They Work With Any Standard 1 Handlebar Wild 1 Chubby Bars And Most Other Bars. Use Your H.D. Top Clamp After Market Top Clamp Or A Wild 1 Custom Top Clamp. Get Thick Up Top And Balance Out Your Front End.

Part Number: WO525
CAN$62.64

Chubby Risers - 1-14 in Thick x 3 12 in. RiseChubby Risers - 1-14 in Thick x 3 12 in. Rise
The Ultimate In Your Face Enhancement To Your Front End What A Look 1 14 Thick x 1 12 3 12 4 12 6 5 12 9 12 Pullbacks. Precision Machined From Billet Aluminum With A Brilliant Show Chrome Finish. Chubby Risers Are Versatile They Work With Any Standard 1 Handlebar Wild 1 Chubby Bars And Most Other Bars. Use Your H.D. Top Clamp After Market Top Clamp Or A Wild 1 Custom Top Clamp. Get Thick Up Top And Balance Out Your Front End.

Part Number: WO529
CAN$74.39

Chubby Risers - 1-14 in Thick x 4 12 in. RiseChubby Risers - 1-14 in Thick x 4 12 in. Rise
The Ultimate In Your Face Enhancement To Your Front End What A Look 1 14 Thick x 1 12 3 12 4 12 6 5 12 9 12 Pullbacks. Precision Machined From Billet Aluminum With A Brilliant Show Chrome Finish. Chubby Risers Are Versatile They Work With Any Standard 1 Handlebar Wild 1 Chubby Bars And Most Other Bars. Use Your H.D. Top Clamp After Market Top Clamp Or A Wild 1 Custom Top Clamp. Get Thick Up Top And Balance Out Your Front End.

Part Number: WO526
CAN$74.39

Chubby Risers - 1-14 in Thick x 5 12 in. PullbackChubby Risers - 1-14 in Thick x 5 12 in. Pullback
The Ultimate In Your Face Enhancement To Your Front End What A Look 1 14 Thick x 1 12 3 12 4 12 6 5 12 9 12 Pullbacks. Precision Machined From Billet Aluminum With A Brilliant Show Chrome Finish. Chubby Risers Are Versatile They Work With Any Standard 1 Handlebar Wild 1 Chubby Bars And Most Other Bars. Use Your H.D. Top Clamp After Market Top Clamp Or A Wild 1 Custom Top Clamp. Get Thick Up Top And Balance Out Your Front End.

Part Number: WO527
CAN$109.65

Chubby Risers - 1-14 in Thick x 6 in. RiseChubby Risers - 1-14 in Thick x 6 in. Rise
The Ultimate In Your Face Enhancement To Your Front End What A Look 1 14 Thick x 1 12 3 12 4 12 6 5 12 9 12 Pullbacks. Precision Machined From Billet Aluminum With A Brilliant Show Chrome Finish. Chubby Risers Are Versatile They Work With Any Standard 1 Handlebar Wild 1 Chubby Bars And Most Other Bars. Use Your H.D. Top Clamp After Market Top Clamp Or A Wild 1 Custom Top Clamp. Get Thick Up Top And Balance Out Your Front End.

Part Number: WO528
CAN$76.74

Chubby Risers - 1-14 in Thick x 9 12 in. PullbackChubby Risers - 1-14 in Thick x 9 12 in. Pullback
The Ultimate In Your Face Enhancement To Your Front End What A Look 1 14 Thick x 1 12 3 12 4 12 6 5 12 9 12 Pullbacks. Precision Machined From Billet Aluminum With A Brilliant Show Chrome Finish. Chubby Risers Are Versatile They Work With Any Standard 1 Handlebar Wild 1 Chubby Bars And Most Other Bars. Use Your H.D. Top Clamp After Market Top Clamp Or A Wild 1 Custom Top Clamp. Get Thick Up Top And Balance Out Your Front End.

Part Number: WO530
CAN$144.91

Chubby Road Glide BarsChubby Road Glide Bars
Sensational 1 14 thick customs for the Road Glide. Designed for maximum comfort and control. They are 31.0 wide with a 14.5 pullback and 8.5 end rise. They work with the stock Controls Grips Cables Brake Line Wiring.

Part Number: WO517
CAN$162.93

Chubby Road King BarsChubby Road King Bars
Custom Chubbys Specifically Designed for the Road King T.M.. and Stretch Frame Custom Bikes. The Ultimate in Comfort Control for Riders of Average Height and Under. They are 32.5 Wide with Fluid Bends and a 16.0 Pullback that Puts You In The Comfort Zone No More Back Neck and Shoulder Aches from Leaning to Reach Your Bars. Get the Best in Style Comfort Custom 1 14 Thick Knurled Pre Drilled for Internal Wiring with a Brilliant Show Chrome Finish. Use Your Stock Controls Cables Brake Line Wiring.

Part Number: WO508
CAN$160.58

Chubby Road King II BarsChubby Road King II Bars
Custom Chubbys Specifically Designed for the Road King Stretch Frame Custom Bikes and Riders of Average Height and Above. They are 35.5 Wide have a 14.25 Pullback with Fluid Bends that Set You in the Optimum Riding Position with Hand Wrist Placement for Maximum Comfort Control Custom 1 14 Thick Knurled Pre Drilled for Internal Wiring with a Brilliant Show Chrome Finish. Use Your Stock Controls Cables Brake Line Wiring.

Part Number: WO518
CAN$159.01

Chubby Springer Beach Bar - FLSTSChubby Springer Beach Bar - FLSTS
Spectacular custom Chubby Beach Bars for HERITAGE FATBOY CUSTOMS with super fluid bends and perfect hand wrist position for comfort and control. Show chrome plated knurled and set up for internal wiring.WO551 Springer model is an awesome fit on the FLSTS. Mount on the stock Springer risers FLSTS FXSTS. Work with stock most custom controls and grips.Specs: Width 36.5 end rise 3.5 center width 11.0 pullback 14.75. Note: Pictures show bar on Springer Heritage

Part Number: WO551
CAN$168.41

Chubby Springer FLSTS BarChubby Springer FLSTS Bar
A spectacular look on the Springer Heritage. The ultimate combination of comfort control and styling. Fluid bends that provide great hand and wrist placement for optimum riding position. They work with the stock risers cables brake line wiring on FLSTS FXSTS models.Specs: Width 34.5 end rise 4.5 center 12.0 pullback 12.5.

Part Number: WO510
CAN$160.58

Chubby Springer Pullback Drag BarChubby Springer Pullback Drag Bar
Custom Chubby Springer Drag Bars the first ever one piece pullback drag bars that mount directly to the factory Springer front end on FXSTS FXSTSB FLSTS. The 6.0 pullback risers are 4.75 on center and feature Wild 1s exclusive integrated mounting assembly with built in vibration dampers. A sensational custom look and at 30.5 wide with a 4.0 end rise and a 11.0 pullback they provide the optimum rider hand and wrist positioning for maximum comfort and control. Awesome 1 14 thick with smooth polished riser welds a brilliant show chrome finish pre drilled for internal wiring and work with stock and most custom controls and stock cables brake line and wiring.

Part Number: WO565
CAN$235.01

Custom Handlebar Clamps - Ball-MilledCustom Handlebar Clamps - Ball-Milled
LIHidden hardware.LIPrecision machined from billet aluminumLIChrome-platedLIWorks with Wild 1 chubby bars and risers standard 1 Inch bars stock and stock risers.LIFits all H-D with 1 Inch or 1-14 Inch bars.

Part Number: WO536
CAN$75.96

Custom Handlebar Clamps - SmoothCustom Handlebar Clamps - Smooth
LIHidden hardware.LIPrecision machined from billet aluminumLIChrome-platedLIWorks with Wild 1 chubby bars and risers standard 1 Inch bars stock and stock risers.LIFits all H-D with 1 Inch or 1-14 Inch bars

Part Number: WO535
CAN$75.96

Handlebar Adapter Kit - DeuceHandlebar Adapter Kit - Deuce
LICustom inserts fit top triple tree.LIModifies the Deuce front end to accept Wild 1 Chubby bars.LIPrecision machined from steel.LIShow quality chrome-platedLIMade in USA

Part Number: WO805
CAN$27.38

Handlebar Clamps - SmoothHandlebar Clamps - Smooth
LIShow chrome finishLIMade in USALIFits all H-D with 1 Inch and 1-14 Inch bars

Part Number: WO505
CAN$46.97

Handlerbar Clamps Ball-MilledHandlerbar Clamps Ball-Milled
LIShow Chrome FinishLIMade in USALIFits all H-D with 1 Inch or 1-14 Inch bars

Part Number: WO506
CAN$46.97

Physco Chubby 10 inch Chopper T-Bar - BlackPhysco Chubby 10 inch Chopper T-Bar - Black
li 1-14 in. thick diameterli 12 in. - 13 tpi bolt size li 10 in. rise 30-12 in. wide 8-12 in. center 8 in. pullbackli Riser spacing 3-12 in. center to centerli Pre-drilled for internal wiring li Works with early and late model stock controls and grips most custom controls and custom gripsli Welds at risers polished smoothli Made in USA

Part Number: WO563B
CAN$168.41

Physco Chubby 18.0 in. ApesPhysco Chubby 18.0 in. Apes
Wicked looking custom Chubbys designed just right for tall riders. Precision bends finely tuned to position the riders arms and wrists at the optimum angle for maximum comfort and control. 1 14 Thick Knurled Pre Drilled for Internal Wiring with a Brilliant Show Chrome Finish. Work with stock and most custom controls grips risers and top clamps.

Part Number: WO570
CAN$188

Physco Chubby 20.0 in. ApesPhysco Chubby 20.0 in. Apes
These bad boy custom Chubbys look insane but not to those big enough to get a grip on them. Precision bends are finely tuned to position the extra tall riders arms and wrists at the optimum angle for maximum comfort and control. 1 14 Thick Knurled Pre Drilled for Internal Wiring with a Brilliant Show Chrome Finish. Work with stock and most custom controls grips risers and top clamps.

Part Number: WO571
CAN$191.92

Physco Chubby Chopper Drags - 10 in. DragsPhysco Chubby Chopper Drags - 10 in. Drags
10.0 Built in Straight Riser Drags 30.5 Wide. A full 1 14 Thick with Smooth Polished Riser Welds a Brilliant Show Chrome Finish and Pre Drilled for Internal Wiring. Chopper Chubby Drag Bars transform the look from stocker to Chopper add Balance to the Front End by maintaining the Thick lines from the Forks right up through the Grips. Work with the stock Controls Grips Cables Brake Line Wiring on most models. Bar pictured on FXSTC

Part Number: WO563
CAN$168.41

Physco Chubby Chopper Drags - 8 in. DragsPhysco Chubby Chopper Drags - 8 in. Drags
8 Built in Straight Riser Drags 30.5 Wide. A full 1 14 Thick with Smooth Polished Riser Welds a Brilliant Show Chrome Finish and Pre Drilled for Internal Wiring. Chopper Chubby Drag Bars transform the look from stocker to Chopper add Balance to the Front End by maintaining the Thick lines from the Forks right up through the Grips. Work with the stock Controls Grips Cables Brake Line Wiring on most models. Bar pictured on an XL Chopper

Part Number: WO562
CAN$168.41

Rear Adjustable Lowering Kit - Softail 00 - 09Rear Adjustable Lowering Kit - Softail 00 - 09
LIReduces height as much as 2 inches.LIMade in USA.LIFits 00-09 Softail models.

Part Number: WO201
CAN$46.97

Skull Dash Nut - Softail Models 90 - 93Skull Dash Nut - Softail Models 90 - 93
Fits all Fat Bob tanks.

Part Number: WO325
CAN$15.63

Top Clamp - Deuce Softail DeluxeTop Clamp - Deuce Softail Deluxe
LI1-piece top clamp for Deuce and Softail Deluxe style risers.LICovers the 1 Inch diameter center section of the chubby bars.LIPrecisioned machined from billet aluminum with a show chrome finish.LIFits stock Deuce Softail Deluxe and same style aftermarket risers all 1 Inch handlebars and wild 1 chubby bars.

Part Number: WO537
CAN$50.89
À PROPOS DE NOUS | LIVRAISON | RETOURS | DÉCLARATION DE CONFIDENTIALITÉ
Copyright © 2013 Tous les Droits Réservés.